Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Temple City
Gate installation in Temple City usually runs between $1,800 and $7,500 depending on whether you need a welded steel driveway gate, a pedestrian gate, or a full automatic system with a new power run. Most Temple City homes built in the 1950s and 60s were never wired for gate operators, so a proper automatic installation often includes a trenched 120V circuit from the panel to the gate post. That’s the work we do regularly here, and it’s why we plan installations carefully rather than promising same-day turnarounds. If you’re considering a new gate or replacing one that’s sagging, call (469) 530-2485 for a written estimate.
We know Temple City’s streets: Golden West Avenue, Longden Avenue, Cloverly Avenue, the ranch homes with block walls and driveways that slope toward the curb. Our Gate Installation crews serve the entire city, from the neighborhoods near Temple City Park to the border streets along Rosemead and El Monte. A gate here has to handle clay soil, afternoon heat, and a lot that wasn’t designed for modern automation. We plan for all three.
Why Carver Gate Repair Is Temple City’s Preferred Gate Installation Company
Temple City homeowners call us after other contractors have quoted one number and walked in the door with another. That doesn’t happen with us. Every installation starts with a written price, agreed before any work begins. The number on that sheet is the number you pay. Lonnie Burke runs our crews to that standard, and every technician who steps onto your property is background-checked and in uniform.
Our reputation in Temple City rests on the work itself. We’ve installed gates on Cloverly Avenue, repaired sagging hinge posts on Longden Avenue, and trenched power to automatic operators across the 91780 zip code. Homeowners see the same crew from the first measure to the final walkthrough. We don’t subcontract the work out, and we don’t leave a job until the gate reverses cleanly on obstruction testing and you’ve seen the entrapment protection check with your own eyes.
Our phones are answered by a live person around the clock, including weekends. You won’t reach a voicemail box. When a Temple City gate fails and a vehicle is stuck in the driveway, waiting until Monday isn’t acceptable.
Gate Fabrication in Temple City
Gate fabrication in Temple City means building a gate to fit an opening that’s rarely square. The 1950s and 60s ranch homes here settled into the expansive clay soil, and block walls shifted. A gate that comes off a rack and bolts to the post will bind within months. We measure each opening on site, account for slope and post lean, and fabricate the gate to those actual dimensions, not the dimensions the original builder intended.
Typical gate fabrication for Temple City properties runs $1,800 to $5,500 for a welded steel driveway gate, depending on width, height, and whether you want a solid privacy panel or an open picket design. Pedestrian gates run $900 to $2,200. Every gate is primed and powder-coated before installation.
Driveway Gates
A Temple City driveway gate has to handle heat expansion and a post that may shift slightly with seasonal moisture. We build frames from structural steel tube, not thin channel, and we weld pickets inside the frame rather than screwing them on. The result holds its line for years, not months.
Pedestrian Gates
Pedestrian gates in Temple City see hard daily use. Kids, groceries, bikes, the dog. We reinforce hinge mounting points and set posts with enough depth that the gate doesn’t drag on the walkway after one rainy season. The latch strikes clean every time.
Automatic Gate Installation in Temple City
Automatic gate installation in Temple City almost always requires a new dedicated electrical circuit. Most homes here have an exterior outlet near the gate, and in our experience, tapping that outlet is the single most common cause of operator failure we see. The voltage drops, the motor stalls mid-travel, and the control board burns out. We run a trenched 120V circuit from the main panel to the operator post as standard practice.
Full automatic gate installation in Temple City, including the new power run, operator, safety sensors, and programming, runs $3,500 to $7,500. That’s the honest range for work done to code, with the entrapment protection test included. Anyone quoting far less is skipping the power run or the safety wiring.
Operator and Safety System
We install operators from LiftMaster, Viking, Ghost Controls, DoorKing, and Elite, matched to the gate weight and cycle frequency. Every automatic gate gets a safety photocell and a properly wired entrapment sensor. We run the UL 325 reversal test in front of you before we consider the job finished.
Keypad and Entry
Most Temple City homeowners add a wireless keypad or a phone-based entry system. We program codes on site, pair remotes, and show you how to override the system if the power goes out. No manual to decode at 10 p.m.
Trusted Brands We Service in Temple City
We stock parts locally for the operators Temple City homes most often run: LiftMaster for residential slide and swing gates, Viking and Ghost Controls for solar-capable systems, and DoorKing and Elite for heavier commercial-style driveway gates. If your existing operator matches one of these brands, we probably have the control board, limit switch, or receiver on hand, which shortens the wait between diagnosis and a working gate. If you’re switching brands, we’ll tell you honestly whether it’s worth the change or whether repairing the unit you have makes more sense.
Common Gate Installation Problems We See in Temple City Homes
- Power pulled from an existing exterior outlet. A 1950s Temple City ranch home usually has one or two exterior receptacles, and neither was built to carry a gate operator. The operator stalls mid-cycle and the control board fails early. The fix is a dedicated circuit, which is why we include it in every automatic installation quote.
- Shallow post footings in expansive clay. Temple City soil swells and contracts with rain and drought. A footing poured 18 inches deep will shift within a year, and the gate sags at the hinge rather than mid-panel. We pour footings below the frost and clay movement line, reinforced with steel, and we don’t skip the cure time.
- Skipped or miswired safety sensors. An automatic gate without a working photocell or loop detector fails the UL 325 entrapment protection standard. Vehicles and pedestrians are exposed to real risk. We wire and test every sensor on every installation, no exceptions.
- Gates built to stock dimensions. A gate sized for a “standard” opening will bind on a Temple City driveway where the posts have leaned half an inch over 60 years. We measure, then fabricate. It takes an extra day and saves a season of callbacks.
Pricing for Gate Installation in Temple City, CA
Here are the numbers for Temple City, straight. A welded steel driveway gate, fabricated and installed, runs $1,800 to $5,500. A pedestrian gate runs $900 to $2,200. A full automatic system with a new trenched power circuit, operator, sensors, and programming runs $3,500 to $7,500. What moves the price is gate width, whether the post footings need to be re-poured, how far the power has to be trenched, and the operator brand you choose.
Every quote is written and fixed before work starts. No number changes at the door. Estimates are free. Call (469) 530-2485 and Lonnie Burke or one of our project leads will walk the job with you and hand you a price on paper.
We Also Serve Cities Near Temple City
Our installation crews work throughout the San Gabriel Valley, including El Monte, San Gabriel, Arcadia, and Rosemead. If your property sits near the Temple City border, we’ll schedule the same crew and the same written price. See how we handle Temple City specifically or call us for an estimate anywhere in the immediate area.
Serving Temple City, CA – Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Temple City
Most Temple City gate installations take two to four working days from the first measure to the final walkthrough. A welded steel driveway gate usually needs a day for fabrication after the opening is measured, then a day on site for post setting, hanging, and alignment. If we’re trenching a new power circuit for an automatic system, add a day. We schedule the work in sequence and tell you the timeline in writing before we start.
Yes. Federal safety standards require every automatic gate to have working entrapment protection, which means a safety photocell or edge sensor, and a gate that reverses when it meets resistance. We wire and test these on every installation and show you the test before we leave. A gate installed without this protection is a liability, and it won’t pass inspection.
In Temple City, a gate that sags at the hinge usually means the post footing has shifted in the expansive clay soil. When a post was poured shallow, the entire post leans, and the gate drops at the hinge while the panel itself stays straight. Replacing the panel without resetting the post means doing the same repair again in a year. We re-pour the footing deeper, set the post true, and then hang the gate.
Solar openers work in Temple City, but they’re not right for every gate. A single swing gate with light use can run on a Viking or Ghost Controls solar system with a panel and battery. A heavy double gate or a gate that cycles many times a day needs a hardwired circuit to hold voltage. We’ll tell you which one your gate actually needs rather than selling the solar option because it’s faster to install.
We install LiftMaster, Viking, Ghost Controls, DoorKing, Elite, FAAC, BFT, Linear, and Mighty Mule operators. The right match depends on the gate weight, swing or slide configuration, and how often it cycles. We stock common repair parts locally for Temple City homes, and we pair the operator to the gate, not the other way around. Call (469) 530-2485 for a written estimate on any brand.
If you’re ready to replace a sagging gate or install an automatic system on your Temple City property, call (469) 530-2485. We’ll measure the opening, assess the footing and power situation, and hand you a written price before any work begins. The estimate is free, and the guarantee is in writing.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Temple City and the San Gabriel Valley.