Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across West Palm Beach
A new gate installation in West Palm Beach typically runs $3,800 to $9,500 for a residential driveway gate, depending on material, length, and operator. We work exclusively on gates and motor systems, so the crew that shows up at your West Palm Beach home does this every day, not as a side job between kitchen remodels. Salt air changes what lasts here, and we spec every job accordingly. Our Gate Installation team serves all of West Palm Beach, from El Cid to Riverwalk to the Preserve at Ibis, with written pricing before any work begins. Call (469) 530-2485 to talk through your project.
Why Carver Gate Repair Is West Palm Beach’s Preferred Gate Installation Company
Lonnie Burke leads our Gate Repair in West Palm Beach and installation work, and the standard he holds the crew to is the same one we’ve operated under since 2008: The Garrison Standard. Written price before work starts. Background-checked, uniformed technicians on every call. A 365-Day Done Right Promise in writing on every gate installation. That matters in a market where too many homeowners have already paid twice for the same gate.
Our phone is answered by a live person 24 hours a day, seven days a week. You won’t get a voicemail box or a call-back queue when you call (469) 530-2485. And because we’re the gate division of the Garrison Partners family, every West Palm Beach job is bound to the same non-negotiable process: a written quote that doesn’t move, a site left clean, and a free second visit if anything fails inside the guarantee window.
We’re also not generalists. We service and install gate systems on nine operator brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means when you have a specific operator in mind, or we need to match a replacement to the system already wired at your property, we carry or can source the right parts fast.
Electric Gate Installation in West Palm Beach
Electric Gate Installation in West Palm Beach means an automatic operator, a power run, safety devices, and the gate itself, all specified for a coastal environment. A typical electric driveway gate installation here runs $4,500 to $9,500. The operator itself usually accounts for $1,200 to $3,200 of that, depending on whether it’s a swing or slide system and which brand you choose.
Salt-Air Rated Operators and Control Boards
The control board inside an operator is the first thing humidity and salt kill. We favor operators with sealed or conformal-coated boards, and we mount them clear of standing water and direct sea spray. For swing gates near the Intracoastal, an articulating arm operator tends to outlast an underground piston unit because fewer seals sit at grade level in brackish runoff.
What the Power Run Involves
An electric gate needs a dedicated circuit run from the panel, usually in conduit, with a disconnect within sight of the operator. In West Palm Beach’s sandy soil, we trench as needed and often recommend a junction box rated for damp locations. You’ll also need a battery backup if you want the gate to move during outage season, which in South Florida is every summer. We’ll have an electrician or our own local guy coordinate the permit path, depending on what your municipality requires.
Driveway Gate Installation in West Palm Beach
Driveway Gate Installation in West Palm Beach usually means a sliding or swing gate covering an opening between 10 and 20 feet. A standard aluminum sliding driveway gate runs $3,800 to $6,800 installed, while a custom ornamental swing gate with decent hardware starts around $5,500 and can run past $12,000 for longer spans or heavy steel. The operator, power, and safety edges are on top of that if you want automation the same day.
Sliding Gates for Tight Setbacks
Many West Palm Beach lots, especially in neighborhoods like Sunshine Park or Grandview Heights, have short driveways with little room for a swinging leaf. A sliding gate rides on a track and cantilever rollers, so it doesn’t eat up yard space when it opens. We spec stainless rollers and a galvanized rail for those installations, because salt-laden rain will eat a raw steel track inside two seasons.
Swing Gates for Classic Curb Appeal
On wider lots along Flagler Drive or in Pineapple Park, a double swing gate makes a stronger front-of-house statement. But double gates need two solid hinge posts and often a center drop-rod. We use hot-dip galvanized steel for posts and 316 stainless for all fasteners within a mile of the ocean. Painted mild steel just isn’t a serious option on this coastline.
Trusted Brands We Service in West Palm Beach
We carry parts and factory-trained service knowledge for all major residential gate operators. DoorKing and Viking operators are common on older West Palm Beach estates and HOA entries, while Ghost Controls kits show up on newer DIY installations, and Elite operators are popular on commercial or high-cycle residential applications. Because we work on all of them, we don’t push you into a brand we happen to have on the truck. We match the operator to your gate’s weight, cycle count, and distance from the ocean, and we keep local stock of boards and arms for the most common failures.
Common Gate Installation Problems We See in West Palm Beach Homes
- Rusted hinge posts at grade. Salt air and lawn irrigation ricochet puts constant moisture at the base of a painted steel post. Within two or three years the post rots through at ground level, the gate sags, and the operator burns out fighting the misalignment.
- Operator boards corroded by airborne salt. We’ve pulled covers off LiftMaster and FAAC boxes near the Intracoastal and found green fuzz on the terminal strips. The board shorts intermittently, the gate opens halfway, then the homeowner calls us on a weekend.
- Concrete footings that shift in sandy soil. West Palm’s residential lots sit on sandy, porous fill that settles unevenly. A footing poured without enough depth or rebar will tip the hinge post within a few years, and no amount of hinge adjustment fixes a moving foundation.
- Paint-only frames on new gates. New gates with a pretty powder-coat over raw mild steel look great for a year. On the coast, they start bubbling from the inside out. We recommend aluminum or galvanized steel as the structural base, with paint as a cosmetic layer only.
Pricing for Gate Installation in West Palm Beach, FL
At West Palm Beach, a single swing gate with no automation typically runs $3,500 to $6,500. Add an operator and safety eyes and expect $4,500 to $9,500 total. A double driveway gate with automation usually lands between $7,000 and $14,000, depending on length, material, and whether we’re reusing existing posts or setting new ones. Aluminum keeps the weight and cost down. Galvanized steel adds about 20 to 35 percent, but on Flagler Drive it’s money well spent. Every quote is written and agreed before any material is ordered or a single post hole is dug. Call (469) 530-2485 for a free, no-pressure estimate with actual numbers.
We Also Serve Cities Near West Palm Beach
Beyond Gate Installation in West Palm Beach, our crews run the same Garrison Standard service to Palm Beach, Greenacres, North Palm Beach, and Palm Beach Gardens. If you’re just outside the city line, the same background-checked technicians and written quoting process apply.
Serving West Palm Beach, FL – Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in West Palm Beach
West Palm Beach sits directly on the Atlantic, and the prevailing onshore breeze carries airborne salt across the whole city, not just beachfront lots. Combine that with year-round humidity and you get corrosion rates two to three times what you’d see in inland cities like Royal Palm Beach. Painted mild steel gates that would last 10 years inland often show through-rust at hinge points and the post base within 2 to 3 years here. The answer is galvanized steel or aluminum for the structure, 316 stainless fasteners, and operators with sealed boards. Call (469) 530-2485 if you’re tired of chasing rust every couple of seasons.
For coastal West Palm Beach, we prefer an articulating arm swing operator or a slide operator with the control board mounted high and sealed, not sitting in a box at grade level where brackish runoff pools. LiftMaster and FAAC both make coastal-friendly units. The key is not just brand but installation: a drip shield over the board, dielectric grease on terminals, and a battery backup for storm season. We’ll spec the exact operator for your gate’s weight and your distance from the water, and the price is written before we start.
Minimum 36 to 42 inches, with rebar and often a wider base than inland standards call for. West Palm’s sandy, porous soil drains fast but shifts under load, and saltwater intrusion weakens fresh concrete over time. A shallow footing is exactly why so many gates sag after a few years. We dig to 42 inches where soil conditions allow, set the post plumb and true, and let the concrete cure before hanging any weight. If you’re replacing a gate and the old post shifted, the footing is usually the reason.
Yes. UL 325 requires photo-eyes or an equivalent entrapment protection device on every automatic gate in the United States, and West Palm Beach installations are no exception. We install photo-eyes on both sides of the gate opening, plus edge sensors on gates that meet a fixed structure. These are not optional add-ons; they’re part of a compliant installation and they’re included in our written quote. We also walk you through a simple quarterly test so the eyes stay aligned.
Look at the base of the post. If the gate sags but the post is sound and plumb, a hinge adjustment or sag kit usually fixes it. If you see rust staining at ground level, flaking metal, or the post leans even slightly, the footing or post base has failed and adjusting the hinges only delays the job. Our crew replaced a swing gate on Flagler Drive where the original painted steel post had corroded through at the base from years of salt air. We set a new hot-dip galvanized post, swapped to 316 stainless fasteners, and hung a LiftMaster operator with a safety photocell and loop detector. That gate should outlast the one it replaced by a decade. Call (469) 530-2485 and we’ll tell you which one you’re dealing with, straight.
Get a Written Quote for Your West Palm Beach Gate Installation
If you’re in West Palm Beach and you need a gate built for salt air, for sandy soil, and for years of daily use, call (469) 530-2485. Lonnie Burke and the crew will get your measurements, walk you through material and operator options, and hand you a written price before anything gets ordered. Free estimate, clear scope, and a one-year guarantee in writing. The ocean is hard on gates. Your gate doesn’t have to be one of the victims.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving West Palm Beach and the surrounding South Florida coast.