Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Antelope
Gate motor repair in Antelope typically runs between $180 and $340 for a service call that includes diagnosis and most common fixes like limit switch adjustments, photocell realignment, or control board resets. A full operator replacement lands higher, usually $850 to $1,800 depending on whether it’s a swing or slide gate and which brand is already mounted. If your gate is stuck, grinding, or reversing on its own, we can usually diagnose it same-day. Call (469) 530-2485 and you’ll get a live person, not a voicemail tree.
We work daily in Antelope, from the older lots off Antelope Road to the newer subdivisions around Lone Tree Park and the stretches near Elverta Road. Our technicians know these neighborhoods and the way Antelope’s clay-heavy soil shifts gate posts season after season. That local familiarity means we spend less time guessing and more time fixing what’s actually wrong.
Why Carver Gate Repair Is Antelope’s Preferred Gate Motor Repair Company
Carver Gate Repair runs on The Garrison Standard, which has been the operating rule since 2008. The code is straightforward: a written price before any work starts, a background-checked technician in uniform at your gate, and a written guarantee on every repair, good for a full year. Homeowners in Antelope who have already dealt with no-shows and prices that move at the door tend to appreciate that kind of discipline.
Lonnie Burke leads the team, and the crew’s reputation in Antelope is built on showing up when we say we will and cleaning up before we leave. Customers off Walerga Road and along North Loop Boulevard have told us the same thing: the technician explained the fault in plain terms, wrote down the price, and did the work without pressure or upsells. That process is not an exception at Carver, it’s how every call runs.
Response time to Antelope is coordinated from the brand’s Sacramento office, but crews are dispatched to Antelope daily. For motor failures where the gate is stuck open or the operator is grinding, we prioritize the call and get a technician on-site quickly, often within a few hours. You call, a live person answers, and the dispatch process starts immediately.
Gate Remote Control in Antelope
Gate Remote Control in Antelope covers everything from a remote that stopped opening the gate to reprogramming a new remote after one gets lost or a button wears out. Antelope homeowners call us when a remote works intermittently, when only one of two remotes triggers the operator, or when a new remote needs to be paired with an existing LiftMaster, FAAC, Viking, or Linear receiver.
Common Remote Faults and Repairs
Most remote failures in Antelope trace to a dead battery, but the second most common cause is a receiver antenna that has loosened or corroded, particularly on operators mounted near sprinkler lines. We test the remote’s transmission frequency, check the receiver board, and reprogram the unit in about 30 minutes in most cases.
What It Costs
A Gate Remote Control repair or reprogramming call in Antelope runs $85 to $140 when it’s part of a single remote fault. Replacing a remote with a new compatible unit typically adds $45 to $75 per remote depending on the brand. We quote the exact number before touching anything.
Gate Keypad in Antelope
Gate Keypad in Antelope refers to the hardwired or wireless keypad mounted on the driveway side of the gate, the one you punch a code into when you don’t have a remote. These keypads fail quietly in Antelope because the summer heat and dust work their way into the rubber membrane and corrode the contact pads underneath. We replace keypads, repair wiring, and reprogram codes on Gate Keypad systems for every major operator brand.
When a Keypad Needs Replacing
If the keypad beeps but the gate won’t move, the issue may be in the keypad’s relay or the operator’s control board. If the keypad is dead silent and the backlight is gone, the keypad itself needs replacement. On a recent Antelope stop near Lone Tree Park, a customer’s keypad worked fine for the truck but not for the homeowner’s code, and the issue was a corroded wiring splice inside the post, not the keypad at all.
Keypad and Code Programming Costs
A Gate Keypad replacement in Antelope runs between $120 and $220 including the hardware and labor. A service call to troubleshoot and reprogram an existing keypad runs $85 to $110. Wiring repair keeps the same range but may add $40 to $60 if the splice is buried and needs conduit repair.
Trusted Brands We Service in Antelope
Our Gate Motor Repair team trains on nine brands, and in Antelope we see a heavy share of LiftMaster, FAAC, and Linear operators on the swing gates common to the area’s semi-rural lots. We also service Viking, Ghost Controls, and DoorKing slide and barrier operators on commercial and equestrian properties along Elverta Road. Because we stock common parts for these brands and know their failure points, most Antelope calls are resolved in one visit without waiting on a shipped part.
Common Gate Motor Repair Problems We See in Antelope Homes
- Clay-soil heaving after winter rains. Antelope’s clay soil swells hard when it’s wet and shrinks in summer, and that movement pushes gate posts out of plumb. The operator then strains against a misaligned panel and burns out its motor or gearbox even though the panel itself is fine.
- Photocell misalignment from post drift. When a hinge post moves even half an inch, the safety photocell beam misses its reflector and the gate reverses mid-travel. The symptom looks like a motor fault, but the fix is realigning the post and the beam.
- Loop detector false triggers in summer. Antelope’s heat and dust dry out the sealant around loop detector wires, which causes false activations, a gate that refuses to stay open, or an operator that cycles for no reason. It reads as a motor problem to the homeowner, but the motor is fine.
- Control board resets after brownouts. High-demand summer afternoons bring power dips that knock gate operator boards offline. The gate goes dead, and the homeowner suspects the motor or a safety sensor, when the fix is a hard reset and sometimes a board reflash.
Pricing for Gate Motor Repair in Antelope, CA
A typical Gate Motor Repair service call in Antelope runs $85 to $140 for diagnosis, and most repairs including limit switches, photocell alignment, or a control board reset fall inside $180 to $340 total. A full operator replacement on a swing gate runs $850 to $1,500 depending on brand and horsepower, and a slide gate operator replacement runs $1,100 to $1,800. We always deliver a written price before work starts, so the number you see is the number you pay.
We Also Serve Cities Near Antelope
Our Gate Motor Repair team covers Antelope plus the surrounding communities of North Highlands, Elverta, Rio Linda, and Citrus Heights. If you’re in the middle of a gate failure and you’re in any of these areas, the same Garrison Standard applies.
We work across Antelope daily, from the older homes near North Loop Boulevard to the growing sections along Antelope Road and up toward Elverta Road.
Serving Antelope, CA – Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Antelope
The most common cause in Antelope is a post that has shifted out of plumb due to clay-soil movement, which pushes the gate panel into the safety photocell beam and triggers an automatic reversal. It can also be a failing safety edge sensor or a control board that needs a hard reset. Call us at (469) 530-2485 and we’ll diagnose the actual cause rather than guessing.
In most cases, yes. We prioritize calls where a gate is stuck open or the operator has failed completely, and our Antelope dispatch runs daily. LiftMaster and FAAC parts are among the most common items we stock, so many repairs finish in a single visit.
Swing gate repairs in Antelope typically run $85 to $140 for the service call and $180 to $340 total for most repairs. Slide gates add complexity because of the track, rollers, and sometimes a heavier operator, so total repairs run $250 to $450. Full operator replacements run higher on both.
Entrapment protection means the operator is fitted with safety photocells, a reversing edge, or both, and that the reversal mechanism is tested and functioning. In Antelope, we test this on every Gate Motor Repair call. If your gate reverses on contact or stops mid-travel without a clear reason, call (469) 530-2485 before using it as a primary access point.
Yes. Gate Remote Control programming and Gate Keypad repair are among our most common Antelope calls. We replace remotes, repair keypad wiring, reprogram codes, and match new devices to your existing operator brand, including Linear, Viking, Ghost Controls, and DoorKing.
If your gate operator is acting up in Antelope, call (469) 530-2485 now. You’ll speak to a live person, get a straight answer about what the repair will cost, and have a background-checked technician at your gate with a written price in hand.
Written by Lonnie Burke, Owner at Carver Gate Repair, operating to The Garrison Standard since 2008.