Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Carrollton
Most gate motor failures in Carrollton come down to three things: a gear or limit switch worn past tolerance, a post that has shifted in expansive clay soil, or an electrical fault a homeowner cannot safely trace. We fix all three. Carver Gate Repair sends background-checked, uniformed technicians to Carrollton homes for same-week diagnostic visits and emergency calls seven days a week. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment, and we already know how Carrollton’s alley-access layouts, corner lots, and drainage patterns affect operator performance. Call (469) 530-2485 and you will speak with a live person, not a voicemail box.
Why Carver Gate Repair Is Carrollton’s Preferred Gate Motor Repair Company
Carrollton homeowners call us because we give a written price before any work starts and we stand behind that number. The price is quoted and agreed before we open a control box or pull a motor. If the repair fails inside the guarantee period, we return free. That promise is written on every repair, good for a full year from the date of service. No estimate that grows once the job is open. No second-guessing at the door.
Lonnie Burke leads our Carrollton work. Every technician we dispatch is background-checked and arrives in uniform, so you know exactly who is walking onto the property. Our phones are answered by a live person 24 hours a day, every day of the year. When a gate fails on a Saturday morning or a holiday evening, you reach a human being who can put a technician on a schedule for Carrollton, not an answering service that promises a callback.
We are part of the Garrison Partners family and have operated to The Garrison Standard since 2008. That standard is not a marketing phrase. It means written pricing, clean job sites, and a technician who tests the gate through full open and close cycles before leaving. Carrollton residents who have been burned by no-shows and moving prices tend to notice the difference quickly.
Gate Remote Control in Carrollton
Gate Remote Control in Carrollton covers everything from a transmitter that stopped talking to the receiver, to a full upgrade from a fixed-code remote to a rolling-code system that cannot be easily copied. Many Carrollton gates installed before 2010 still run fixed-code transmitters, which are simple to clone with a handheld reader available online. A rolling-code upgrade plus two new remotes in Carrollton typically runs $180 to $320.
Transmitter Programming and Signal Loss
When a remote works only at five feet or fails intermittently near the curb, the problem is usually a weak antenna, a dying battery, or interference from new LED fixtures or a neighboring gate on a shared alley frequency. We test the transmitter’s output with a field meter before replacing parts. A replacement remote for LiftMaster or FAAC operators runs $65 to $120 programmed on site.
Full Receiver and Remote Replacement
Older DoorKing and Linear receivers sometimes fail completely after a North Texas storm cycle, especially when the receiver board sits in a housing that has collected condensation. We replace the receiver and pair new remotes, then walk the homeowner through setting a personal PIN if they want keypad access added at the same call.
Gate Keypad in Carrollton
A Gate Keypad in Carrollton gives delivery drivers, house cleaners, or contractors access without a remote. Many Carrollton alley-entry properties rely on a keypad as the primary entry point, so when the buttons wear out or the face fills with silt after a hard rain, the gate stops working for everyone but the homeowner. Replacement keypads in Carrollton typically run $110 to $190 installed, depending on whether we are matching an existing Viking, FAAC, or LiftMaster controller.
Keypad Wiring and Weather Sealing
Carrollton soil is predominantly Houston Black clay, which swells and shrinks through the year. That movement can pull keypad conduit loose from a post or pull low-voltage wire connections apart underground. We run new wire, seal the keypad housing, and test the entry code from both outside and inside the gate path.
Integrating a Keypad With an Existing Operator
Not every keypad works with every operator. FAAC and BFT boards use different input logic than older Linear openers. We confirm compatibility before installing, then program the keypad so a wrong code does not leave an energized circuit to trace later. If the keypad is going on a gate with no dedicated pedestrian entry, we also verify the gate’s reversing safety so a child or animal cannot be struck when the keypad opens the gate remotely.
Trusted Brands We Service in Carrollton
We service and repair FAAC, BFT, Linear, and Viking equipment across Carrollton, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. The brand matters less than the installation and the environment around it. A Gate Motor Repair technician who knows only one brand will replace parts. Our team carries a deeper stock of limit switches, control boards, and capacitor kits for the operators we see most often in Carrollton, so we can usually complete the repair on the first visit without ordering parts from a distributor and scheduling a second trip.
Common Gate Motor Repair Problems We See in Carrollton Homes
- Hinge post settlement on expansive clay. Carrollton’s Houston Black clay expands after rain and contracts during dry spells. A swing gate post that moves a quarter inch out of plumb binds the gate on the operator arm, which burns out the capacitor or trips the overload circuit even though the motor itself is sound. We reset the post footing and re-rack the operator before replacing parts.
- Moisture intrusion into control boards after downpours. North Texas storms push water into operator housings, especially on slide gates installed near a post footing with poor drainage. A soaked control board can cause the gate to open on its own or refuse to close. We replace the board, seal the housing, and correct the drainage path so the failure does not repeat next storm.
- Misaligned or dirty safety photocells on alley gates. Alley-facing gates collect dust, grass clippings, and road film. When the safety eye is blocked or knocked out of alignment, the gate reverses immediately or refuses to close, which owners often misread as a motor failure. We clean and align the eyes, then run obstruction tests to confirm the reversal pressure is set correctly.
- Long driveway runs with undersized wire. Many Carrollton homes built before 2000 have low-voltage wire runs from the house to the gate that are undersized for a modern operator’s draw. The motor hums, moves slowly, or overheats. We identify voltage drop at the operator terminals and replace the wire run when the motor itself tests fine.
Pricing for Gate Motor Repair in Carrollton, TX
A motor repair service call in Carrollton runs $95 to $149 for diagnosis, and that amount is credited toward the repair if you proceed. Replacing a swing arm operator or slide motor in Carrollton typically falls between $650 and $1,400 including the part and labor. A new control board runs $250 to $520. A full operator replacement on an alley-access double swing gate with new safety photocells and a keypad runs $1,800 to $3,400 depending on the gate weight, post condition, and power run. Every quote is written, signed, and agreed before work starts. Call (469) 530-2485 for a free estimate on your specific gate.
We Also Serve Cities Near Carrollton
Our technicians serve Carrollton and the surrounding communities daily. If you are a few minutes east or south, we cover Addison and Richardson. To the northwest, we handle Coppell and Lewisville. The same written pricing and full-year guarantee apply no matter which side of the county line your gate sits on.
Serving Carrollton, TX – Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Carrollton
Usually not. In Carrollton, a humming motor with little gate movement most often points to a failed capacitor, a binding hinge post, or voltage drop on an undersized wire run. The motor is the last thing we condemn. We test capacitor output, check current draw, and inspect the post and gate alignment before recommending a motor replacement. Call (469) 530-2485 and we will diagnose it on site.
Monthly, and after any heavy rain event. Carrollton’s clay soil shifts with moisture, and a shifted post knocks the photocell out of alignment even when the gate looks straight. Place a box or trash can in the gate path and press the remote. If the gate does not stop and reverse on contact, turn the operator off at the breaker and call a technician. We test photocell alignment and reversal pressure on every repair call.
Yes. We service and repair keypads and remotes for all three brands, plus Viking, BFT, Linear, Ghost Controls, Elite, and Mighty Mule. The work includes programming new transmitters, repairing or replacing keypad wiring, and testing the code from inside and outside the gate path. A keypad replacement in Carrollton runs $110 to $190 installed. Call (469) 530-2485 to schedule.
Yes, in most cases. Many Carrollton alley-entry gates sit too far from the house panel to run a code-compliant AC line, so we install a solar panel, charge controller, and deep-cycle battery matched to the operator’s draw. Full solar conversion in Carrollton runs $900 to $1,800 depending on gate weight, operator type, and how many cycles per day the gate runs. We size the system for winter sun angles, not just summer output. Call (469) 530-2485 for a written quote.
A proper repair includes checking the post and hinge alignment, testing limit switches, verifying safety photocell alignment, testing reversal pressure, and checking the power supply voltage at the operator. Skipping those steps is how a new motor gets burned out in six months. We were called to a home near Josey Ranch Lake where a LiftMaster swing gate operator had been opening only partway for weeks. The gate looked fine, but the hinge post had shifted after heavy soil movement, and the rack and pinion was binding at an angle. After correcting the post footing and re-racking the operator, we tested the safety photocell and keypad entry through multiple cycles; the gate now runs smoothly and reverses correctly on obstruction.
Carrollton’s gate motor repair demand is shaped by a broad mix of alley-access, rear-entry, and corner-lot properties, which means operators often face long driveway runs, tight side clearances, and shared utility easements. That variability makes precise on-site diagnosis far more important than brand name alone, since a LiftMaster or FAAC unit that works perfectly on one Carrollton lot can underperform on another with different approach angles or drainage. When you call Carver Gate Repair, you get a technician who knows the difference. Estimates are free. Call (469) 530-2485 today, and a live person will answer.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Carrollton and the surrounding Dallas-Fort Worth area.