Gate Motor Repair in Hollywood - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Motor Repair Across Hollywood

Gate motor repair in Hollywood, FL typically runs $225 – $575 for most control board, limit switch, and receiver jobs, with full operator replacements landing between $1,100 and $2,800 depending on the motor type and groundwork involved. Most repairs on swing and slide operators are completed in a single visit, usually within 24 to 48 hours of your call. If your gate won’t open, reverses mid-cycle, or ignores the remote entirely, call (469) 530-2485 and we’ll get a background-checked technician to your Hollywood driveway with a written price in hand before any work begins.

Call (469) 530-2485

We know Hollywood’s streets, from the canal-front lots off North 14th Avenue to the gated communities along Sheridan Street and the older neighborhoods west of Dixie Highway. Salt air does not treat gate motors kindly here. Neither does standing water after a summer storm. Our Gate Motor Repair crews carry the boards, loop detectors, and keypads that fail most often on coastal Hollywood properties, which means fewer return trips and a gate that works when you need it.

Why Carver Gate Repair Is Hollywood’s Preferred Gate Motor Repair Company

Hollywood homeowners call us because we answer the phone. A live person picks up 24 hours a day, seven days a week, including weekends and holidays. No voicemail trees, no call-back queues, no waiting until Monday morning to hear from a dispatcher. When your gate is the only vehicle access to your property, that matters.

Every Carver technician arrives in uniform, background-checked, and carrying a written price for the repair before the first tool comes off the truck. The number on that sheet does not move at the door. If the repair fails within a full year, we return free of charge and make it right. That guarantee is in writing on every job, not implied. Lonnie Burke built Carver Gate Repair around The Garrison Standard: written prices, clean work, and a 365-Day Done Right Promise that we stand behind in Hollywood the same way we do across the Garrison Partners family.

Our crews have seen what Hollywood’s coastal environment does to gate motors. We stock parts locally for Hollywood customers so a LiftMaster control board or FAAC photoelectric eye does not sit on backorder while your driveway stays blocked. Response to Hollywood neighborhoods is typically same-day for emergency repair calls, and scheduled service windows are set and kept.

Gate Operator Keypad in Hollywood

A gate operator keypad in Hollywood gives you coded entry at the driveway so family, guests, and delivery drivers can open the gate without a remote or phone call. On canal-front lots and older Hollywood homes, we regularly see keypad housings that have been baked by salt air and soaked by summer rain, leaving buttons that stick, digits that won’t register, or a unit that works until the first real downpour and then goes dead.

Keypad replacement or wiring repair in Hollywood typically runs $140 – $320, depending on whether we are replacing the keypad itself, rewiring a corroded connection at the operator, or adding a new keypad to an existing system. The price is written and agreed before work starts.

Hardwired vs. Wireless Keypads

Hardwired keypads tie directly into the gate operator’s control board. They are more reliable over time, but Hollywood’s humidity finds every weak seal and connector. Wireless keypads are easier to place at the driveway edge, but batteries and signal interference from nearby canal traffic or dense foliage can shorten their practical life.

When to Replace Instead of Repair

If the keypad case is cracked from sun exposure, the internal board shows white corrosion, or two different code attempts fail to register, replacement is usually the cheaper fix over the long run. We can match the keypad to your existing operator brand, including Linear and Viking entry systems common on Hollywood properties.

Gate Operator Repair in Hollywood

Gate operator repair in Hollywood means diagnosing and fixing the motor, control board, limit switches, receiver, or safety loops that run your driveway gate. The most common call we get is a gate that starts, runs partway, and reverses, or a gate that does not respond to any remote at all. On Hollywood’s canal-front lots, these failures often trace back to salt-air corrosion on the control board or a loop detector that got confused by standing water.

Typical gate operator repair in Hollywood runs $225 – $575. That covers a technician, diagnosis, parts like a limit switch or receiver, and testing of the full open-close-reverse cycle before we leave. A full operator replacement starts around $1,100 and goes up based on motor weight and the condition of the existing mounting and groundworks.

The Repair We Actually Perform

A proper repair is not just swapping a board. We inspect the operator arm, hinge posts, and rack and pinion for wear, then test entrapment reversal per UL 325. In Hollywood, where a single gate is often the only vehicle access, we test the manual release too. If the gate can’t be opened by hand in a power failure, you have a bigger problem than a dead motor.

Signs Your Operator Is Failing

Erratic cycling, humming without movement, or a gate that opens but won’t close all suggest control board or sensor trouble. On coastal lots, these symptoms often show up first after heavy rain or a salt-laden wind. Ignoring them leads to a gate stuck open or closed at the worst time.

Trusted Brands We Service in Hollywood

Carver Gate Repair technicians are trained on nine gate motor brands, including FAAC, BFT, Linear, and Viking, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We match the parts and the know-how to the system already installed in your Hollywood driveway, rather than selling you a brand we happen to carry. For Hollywood customers, we keep common boards, keypads, and photo-eyes for these brands locally stocked so repairs don’t stall waiting on freight. That matters when your gate is your only way in and out.

Common Gate Motor Repair Problems We See in Hollywood Homes

• Salt-air control board corrosion. Hollywood’s coastal humidity and salt air eat circuit boards faster than inland Florida. A five-year-old LiftMaster board on a Hollywood canal-front property often looks like a ten-year-old board in Orlando, showing white crust on connectors and erratic behavior as a result.
• Loop detector failure at canal-front driveways. Standing water after storms and the constant movement of boat trailers confuse buried loop detectors. The gate may stay open for minutes or close on a vehicle that is still crossing.
• Hinge post rot and footing settlement. Older Hollywood homes, especially those built before 2000, often have wood or under-sunk steel hinge posts. When the post sags, the gate strains, the operator works harder, and the rack and pinion wears out early.
• Keypad failure after heavy rain. Hollywood’s summer downpours expose every weak seal on entry keypads. A keypad that works in dry weather and dies after a storm usually has a corroded internal board or a failed gasket.

Pricing for Gate Motor Repair in Hollywood, FL

We Also Serve Cities Near Hollywood

Carver Gate Repair serves Hollywood and the surrounding South Florida communities, including North Miami Beach, Fort Lauderdale, Miami Gardens, and Plantation. If you’re just outside Hollywood and your gate operator is down, call us for the same written pricing and same Hollywood service standard. Dispatch and scheduling for the Hollywood area run through our Miami (South FL) office, with crews serving Hollywood locally.

FAQs About Gate Motor Repair in Hollywood

Hollywood’s Salt Air Changes How Gates Fail

Nowhere in South Florida does a gate motor age gently, but Hollywood’s particular geography accelerates the failures in ways a generic repair shop won’t anticipate. The coastal humidity and salt air mean gate operator control boards and keypads corrode far faster than inland. A five-year-old LiftMaster board here often looks like a ten-year-old board in Orlando, with white crust on the connectors and intermittent faults that make a gate work fine one day and freeze the next. Because so much of Hollywood’s housing stock sits on finger islands and canal-front lots where a single driveway gate is the only vehicle access, a dead operator is not an inconvenience. It’s an access problem. You’re either stuck outside or stuck inside, and neither is acceptable.

We got a call from a homeowner on North 14th Avenue in Hollywood whose LiftMaster swing gate operator would run two feet and reverse, leaving them stuck at the driveway. We found a corroded loop detector and a misaligned safety photocell. Salt air had eaten the connector. We replaced the detector, realigned the photo-eyes, tested manual release and entrapment reversal per UL 325, and the gate cycled clean by afternoon. We also checked the hinge post for sag, because fixing the panel without the post just fixes it twice.

What a Real Repair Includes Beyond the Board

When a Hollywood gate motor fails, the visible symptom is often just the last link in a chain of wear. A sagging hinge post from older concrete footings puts constant strain on the operator. A rack and pinion that has been grinding for a year finally strips. A loop detector that has been getting false triggers from boat trailers and standing water finally gives up. A real repair looks at the whole system: operator, mounting, groundworks, safety edges, and the manual release. That’s what The Garrison Standard demands, and it’s what we do on every Hollywood job. If the repair fails within a full year, the second visit is free. The guarantee is in writing.

Call (469) 530-2485 for a free estimate on gate motor repair in Hollywood, FL. A live person answers, a background-checked technician arrives with a written price, and the work is guaranteed for a year. That’s the whole promise.

Written by Lonnie Burke, Owner at Carver Gate Repair, serving Hollywood since 2008 through the Garrison Partners family.