Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Wellington
A gate motor that won’t open in Wellington usually means either a dead control board, a tripped entrapment sensor, or a post that’s shifted out of alignment. Most repairs run $180 to $340 for motor service and $240 to $520 when we have to pull and replace the operator. Call (469) 530-2485 and a live person answers, day or night.
We work the neighborhoods off South Shore Boulevard, Greenview Shores, and throughout the Equestrian Preserve. We know the drives, the gate styles, and the failure patterns that show up on canal-front lots and sandy fill. When your gate won’t budge and you’ve got a horse trailer waiting on the other side, you don’t need a call-back queue. You need a technician who knows Wellington and shows up ready.
Why Carver Gate Repair Is Wellington’s Preferred Gate Motor Repair Company
We’re the Gate Motor Repair crew that Wellington homeowners call after a no-show or a moving price. Carver Gate Repair operates to The Garrison Standard: a written price before any work starts, background-checked and uniformed technicians, and a written guarantee on every repair, good for a full year. Lonnie Burke runs our crew with one rule: the number on the quote is the number on the invoice.
That matters here because Wellington gate systems sit in a rough environment. Salt air, afternoon lightning, and wet-season ground shift all take a toll. A technician who sees a dozen Wellington gates a week already knows where to look. Ours do.
Phones are answered by a live person 24 hours a day. You won’t get a voicemail tree. You’ll get a schedule and a straight answer. We dispatch to Wellington daily, and our standard response window is same-day or next-morning for most motor failures.
Gate Motor in Wellington
Gate motor work in Wellington covers the operator, the control board, the safety sensors, and the power run. In this area, the two big enemies are moisture and settlement. Operators mounted on posts that sit in sandy fill will shift after a heavy wet-season rain, and a shifted post means a strained motor. We see it constantly in the Equestrian Preserve and on lots backing up to canals.
Motor Diagnosis and Board Repair
Most Wellington gate motors don’t die outright. They fail slowly. A capacitor gets weak, a limit switch corrodes, a control board takes a power surge and forgets its limits. A full diagnosis typically runs $85 to $130, and board-level repair or replacement runs $180 to $340 depending on brand. We carry boards for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Operator Replacement and Post Correction
When the operator itself is beyond repair, replacement runs $350 to $720 for the motor and $240 to $520 for install labor. On Wellington lots with settled posts, we’ll flag that. A new motor on a leaning post is a wasted warranty. We re-set or reinforce the footing before we hang the operator.
Gate Remote Control in Wellington
Gate remote control problems in Wellington follow a pattern: remote works from ten feet but not from the street, or it stops working entirely after a storm. The fix is usually one of three things: a failing remote battery, a receiver that got fried by surge, or a photo-eye that’s misaligned and blocking the close circuit. Programming a replacement remote runs $60 to $120.
Receiver and Keypad Pairing
When the receiver itself is dead, we replace it with the correct unit for your brand and re-pair every remote and keypad on the property. That job runs $120 to $220 for the receiver plus $60 to $120 in labor. Wellington estate drives often have multiple remotes, multiple keypads, and a guest code. We pair them all and test each one before we leave.
Adding Entry While We’re On Site
If you’re adding a keypad or a new remote while we’re repairing the motor, there’s no second trip charge. We’re already there. The part and programming run $80 to $180 on top of the repair. It’s the most common add-on Wellington homeowners request, especially in Palm Beach Point and along Aero Club Drive where multiple family members and grooms need their own access.
Trusted Brands We Service in Wellington
Our Wellington trucks are stocked for DoorKing, Linear, and Viking systems, plus the LiftMaster and FAAC units we see most often on horse farm entrances. We keep control boards, limit switches, remote receivers, and photo-eyes on hand so most repairs are one visit. If we need a specialty part, our Miami office coordinates the order and we’re usually back within two days. You don’t pay for us to guess. You pay for the part and the labor, and the written price covers it.
Common Gate Motor Repair Problems We See in Wellington Homes
- Moisture in the operator housing: Wellington’s afternoon storms drive water into seal gaps, and canal-front lots get airborne salt on top of that. Corroded boards and connectors are the single most common repair we make here.
- Post settlement and gate sag: Sandy fill shifts after wet-season rain, and a gate that drags will trip the entrapment circuit mid-travel or burn out the motor over months. We re-set footings, not just the motor.
- Lightning and surge damage: Summer storms in Wellington are hard on control boards, receivers, and loop detectors. A surge-damaged board often still powers on but won’t hold limits or respond to remotes.
- Photo-eye misalignment from gate movement: A shifted post means the photo-eye no longer lines up, and the gate reverses for “no reason.” Re-aligning the eyes is quick. Fixing the post so they stay aligned is the actual repair.
Pricing for Gate Motor Repair in Wellington, FL
We Also Serve Cities Near Wellington
We cover Wellington and the surrounding communities, including Royal Palm Beach, Greenacres, West Palm Beach, and Palm Beach Gardens. Same-day motor repair is available across most of the area, and our crews carry the parts to finish the job on the first visit.
Serving Wellington, FL – Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Wellington
Why does my gate operator keep tripping mid-travel after a storm in Wellington?
The most common cause is post settlement from saturated sandy fill, which lets the gate sag and drag against the ground or the rack. That drag trips the entrapment circuit. The second common cause is a moisture-fouled control board from water driven into the operator housing during heavy rain. Fix the footing, replace the board if needed, and the gate stops tripping. Call (469) 530-2485 and we’ll diagnose it for $85 to $130 on site.
How long does a proper gate motor installation take in Wellington?
A motor-only replacement takes half a day. A full operator installation with new post footings, power run, and safety edge or photo-eye installation typically takes one to two days. If we’re pouring new footings in the Equestrian Preserve, we schedule around equestrian traffic and give the concrete time to cure before hanging the gate. We never promise same-day installation. We promise a scheduled date, a written price, and a job done to code.
Do Wellington gate operators need entrapment protection to meet code?
Yes. Wellington enforces Florida Building Code, which requires entrapment protection on all automatic gate operators. That means a properly installed photo-eye or contact edge, plus reversal testing after installation. We test with a 2×4 block before we call the job done, and we show you the result.
Which gate motor brands does your Wellington crew service?
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most Wellington estate gates in the Equestrian Preserve run on LiftMaster or FAAC, while many older residential setups use Viking or DoorKing. We stock parts for all of them out of our Miami office and Wellington trucks.
Can you add a keypad or remote control while repairing my Wellington gate motor?
Yes. While we’re on site for the motor, we can add a keypad, pair new remotes, or wire a vehicle sensor loop for an additional $80 to $180 in parts and programming. No second visit, no second diagnosis fee. It’s a common request in Palm Beach Point, where horse trailers and service vehicles need reliable access without a second call-out.
Call Carver Gate Repair for Gate Motor Service in Wellington
If your gate motor is struggling, tripping, or dead, call (469) 530-2485. A live person answers. We’ll give you a straight phone estimate, schedule a time that works around your property, and put the price in writing before we begin. Background-checked, uniformed technicians. A written guarantee on every repair, good for a full year. If it fails inside that year, we come back free. That’s The Garrison Standard, and it’s how we work in Wellington.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Wellington with written prices and guaranteed work.