Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Alameda
Gate repair in Alameda typically runs $180 to $340 for common fixes like hinge replacements and gate realignment, while full operator swaps on automatic gates usually land between $450 and $1,200 depending on the motor and access controls involved. That’s the honest range we quote before we ever pick up a tool. We’ve worked on gates from Bay Farm Island to the Gold Coast, and we know that Alameda’s bay-front soil and salt air do specific things to gate hardware that generic contractors miss. Call us at (469) 530-2485 and a live person answers, day or night. The price you’re quoted is the price you pay, in writing, before any work starts.
We’re Gate Repair specialists, not a general handyman service that happens to own a welder. Our techs are background-checked and uniformed, dispatched from our San Francisco Bay Area office to serve Alameda directly. Whether your gate sags, won’t open, or grinds against the track, the fix starts with a clear diagnosis and a straight answer.
Why Carver Gate Repair Is Alameda’s Preferred Gate Repair Company
Alameda homeowners call us because we answer the phone and show up when we say we will. Lonnie Burke leads our crew, and he runs every job to the Garrison Standard: written prices, background-checked technicians, and a full-year guarantee in writing. No moving numbers at the door. No voicemail roulette.
Our reputation in Alameda comes from doing the work right and standing behind it. The 365-Day Done Right Promise covers every repair for a full year from the date of service. If a repair fails inside that window, the second visit is free. No charge, no argument. That’s not a marketing line; it’s in writing on every invoice.
Response time to most Alameda neighborhoods, including Fernside, East End, and the West End, is typically same-day or next-morning for repair calls. For emergencies, we run 24/7 phone coverage with a live person, not a recording. We know the island’s streets, the older housing stock, and the way salt air works on metal. That local knowledge means we diagnose faster and quote accurately the first time.
Wrought Iron Gate Repair in Alameda
Wrought iron gate repair in Alameda usually involves correcting sag, replacing rusted hinge barrels, or re-welding broken pickets and scrollwork that marine air has weakened over years. Most wrought iron jobs in Alameda run $220 to $480, though a full post re-set on a bay-fill lot can push higher if the footing needs to be re-poured. The work is common in neighborhoods like Gold Coast and Clinton, where ornate iron gates date back decades and sit close to the estuary.
Hinge Post Re-Setting on Bay-Fill Soil
When a wrought iron gate drags or won’t latch, the frame is rarely the problem. Alameda sits on bay-front fill and marine clay. That soil shifts, and the original posts were often set shallow. We dig out the old post, check for rot or corrosion, and re-set it on a proper concrete footing that extends below the disturbed layer. This is the only fix that lasts more than a season.
Weld and Rust Repair on Ornamental Iron
Salt-laden air off the bay eats through paint and into the metal itself. We cut out rusted sections, weld in matching stock, and grind the joint smooth so the repair disappears under paint. The goal is structural integrity first, appearance second. A gate that looks right but has a hairline crack at a weld will fail again.
Metal Gate Repair in Alameda
Metal gate repair in Alameda covers aluminum and steel gates, both swing and slide. Aluminum gates corrode less but dent more easily, while steel gates rust at the base where they meet wet ground. Typical metal gate repairs in Alameda range from $180 for hinge and latch work to $600 or more for structural repairs to a steel frame. Homes along Shoreline Drive and near Crown Beach get the worst of the salt spray, and we see the pattern consistently.
Corrosion Seizing on Rack and Hinges
Steel gates near the estuary seize up because marine air accelerates rust on moving parts. Hinges weld themselves still, and rack and pinion tracks on slide gates develop a crust that makes the motor strain. We free the mechanism, replace what’s too far gone, and apply marine-grade lubricant rated for coastal conditions. It buys years, not weeks.
Realigning a Metal Gate That Binds
A metal gate that won’t close all the way usually has a post that’s moved. In Alameda, that movement comes from soil settlement more than wind load. We check post plumb with a level, measure the gap top and bottom, and correct the alignment before the operator burns itself out fighting the bind. The geometry has to be right, or the new motor fails early.
Trusted Brands We Service in Alameda
Our technicians are trained on nine gate-motor brands, so we match the repair to the system already installed at your home. In Alameda we see a lot of Linear, Viking, and DoorKing operators on older automatic gates, and we stock the common parts for those locally so turnaround stays short. Ghost Controls systems show up on newer residential installs, and we service those as well. When we arrive, we carry the right parts and the right diagnostic tools for the brand on your gate, not a one-size-fits-all guess. That’s the Garrison Standard applied to every truck and every call.
Common Gate Repair Problems We See in Alameda Homes
- Hinge posts rotting out in bay-fill soil. The post looks fine above ground but has rotted or corroded below grade. The gate sags, the latch misses, and the operator strains. We re-set posts on proper footings that extend past the disturbed layer.
- Marine-air corrosion seizing hinges and slide tracks. Salt from the bay works into every moving part. Hinges rust solid, tracks develop a crust, and motors overheat fighting the resistance. We free, replace, and protect the moving surfaces.
- Aging control wiring in historic districts. Homes in the East End and other older neighborhoods still run original low-voltage wiring to keypads and loop detectors. Intermittent entry is usually a corroded connection or brittle insulation, not a dead board. We trace and repair the wiring instead of replacing parts blindly.
- Safety sensor failures on automatic gates. Alameda requires automatic gates to reverse on obstruction for safety. Photocells fail, edge sensors fail, and the gate becomes a hazard. We test and replace safety components on every automatic gate repair we touch.
Pricing for Gate Repair in Alameda, CA
Here are the numbers we quote for typical Alameda jobs. Hinge and latch repairs: $180 to $320. Wrought iron weld and rust repair: $220 to $480. Gate realignment and post re-set: $250 to $600 depending on the footing. Automatic operator replacement: $450 to $1,200 based on brand and access controls. Full metal gate installation runs $2,500 to $6,000 or more, depending on gate size, material, and groundworks. Every price is written down before we start. You approve it, we do the work, and the number doesn’t move at the door.
We Also Serve Cities Near Alameda
Alameda is our focus, but we run calls to Oakland, Piedmont, Emeryville, and Berkeley for the same written-price, guaranteed work. If you’re on the border or splitting time between cities, call (469) 530-2485 and we’ll tell you straight when we can be there.
Serving Alameda, CA – Our Local Coverage Area
We’re based in the Alameda area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Alameda
Because the post below ground is the problem, not the hinge above it. Alameda’s bay-fill and marine clay soil shifts and holds moisture, which rots wood posts and corrodes steel ones at the base. Tightening hinges pulls the gate back to the post, but the post is moving. The fix is removing the post, checking for rot, and re-setting it on a proper concrete footing that extends deep enough to stay put. Call (469) 530-2485 and we’ll assess it in person.
Yes. Automatic gates must comply with UL 325 safety standards, which require reversal on obstruction through photocells or edge sensors. Alameda’s historic homes often have older operators without working sensors, and that’s a real hazard for kids and pets. We test every safety component on every automatic gate repair and replace what’s failed before we leave.
Most hinge, latch, and realignment repairs are done in two to four hours on site. Operator replacement usually runs a half day. Post re-setting with concrete takes longer because the footing needs time to cure before the gate goes back on, typically 24 to 48 hours. We give you a straight schedule up front.
Yes. Our techs work on LiftMaster and FAAC as well as Linear, Viking, DoorKing, Ghost Controls, BFT, Elite, and Mighty Mule. We stock common parts for those brands near Alameda, so repair turnaround is faster than waiting on a part from a distributor. If the operator is beyond reasonable repair, we quote a replacement and install it the same day when parts allow.
First we check the gate’s physical movement by hand. If it binds or drags, the fix is mechanical: hinges, rollers, post alignment, or track condition. If the gate moves freely by hand, the issue is electrical: limit switches, loop detector, control board, or motor. On an Alameda property we also look at soil movement around the posts and salt corrosion on moving parts, because those are the two most common culprits here. Call (469) 530-2485 for a free estimate and a written price before any work begins.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Alameda through the Garrison Standard.