Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Arlington
Gate repair in Arlington, WA typically runs $180 – $650 depending on the damage, with most swing and slide gate fixes completed in a single visit. Our Gate Repair crews dispatch from our Seattle coordination office and carry parts for Viking, Ghost Controls, and DoorKing systems so we’re not driving back to the warehouse while your gate hangs open on 204th Street NE.
We’ve worked on gates along the Stillaguamish River valley where the wet winters push moisture into control boxes, and we’ve realigned driveway gates in the hillside neighborhoods off Jim Creek Road where the grade shifts posts over time. Arlington’s mix of rural acreage and newer suburban development means we see everything from welded ranch gates to automated community entrances. When your gate won’t close at 10 PM or the motor grinds to a halt before a holiday weekend, a live person answers our phone. No voicemail. No “we’ll call you Monday.”
Call (469) 530-2485 for a free estimate. We quote the full price in writing before any work starts.
Why Carver Gate Repair Is Arlington’s Preferred Gate Repair Company
Arlington homeowners don’t need another contractor who treats gate work as a side job between deck builds. We focus exclusively on gates and motor systems. That matters on properties along Highway 530 where a failed automatic gate leaves a long driveway exposed, or in the Glacier Peak neighborhood where HOAs require specific operator brands for uniform community access.
Our technicians arrive uniformed and background-checked. You get a written price before we touch a wrench, and our 365-Day Done Right Promise covers every repair. If something fails inside that year, we come back free. No argument. No re-diagnostic fee.
Phones are staffed by a live person 24 hours a day, including weekends and holidays. That’s not a marketing line. It’s how we operate under The Garrison Standard.
Commercial Gate Repair in Arlington
Commercial Gate Repair in Arlington covers the motorized access systems at apartment complexes along Smokey Point Boulevard, storage facilities near I-5, and industrial yards off 59th Avenue NE where delivery trucks depend on consistent entry timing. Commercial operators cycle hundreds of times daily, so worn limit switches, failed loop detectors, and bent articulating arms are routine failures we address.
A typical commercial gate repair in Arlington runs $280 – $850. Loop detector replacement usually falls at the lower end; operator rebuilds or post-resetting after vehicle impact push toward the higher range. We always inspect the safety edges and photo eyes, since Arlington’s commercial code enforcement follows Snohomish County standards for automated pedestrian barriers.
High-Cycle Operator Maintenance
Facilities near the Arlington Municipal Airport see heavy contractor traffic starting at 6 AM. We service Elite and DoorKing operators on quarterly schedules to catch worn sprockets before they strip at rush hour. A stripped sprocket shuts down a whole delivery lane.
Access Control Integration
When your keypad or card reader fails but the gate motor runs fine, the problem is usually in the relay board or wiring run. We trace the circuit, repair the connection, and test integration with your existing system rather than selling you hardware you don’t need.
Iron Gate Repair in Arlington
Iron Gate Repair in Arlington addresses the welded ornamental gates common in older neighborhoods near downtown and the custom fabrications on rural properties along Jordan Road and Trafton. Iron holds up well against Arlington’s wet climate, but the weld points corrode first, especially where driveway salt collects at the base of posts.
A typical iron gate repair in Arlington costs $220 – $580. Hinge re-welding and rust remediation run toward the lower end; full section replacement or post extraction and re-setting after ground shift cost more. We match existing scrollwork and finial patterns when fabricating replacement pieces so the repair doesn’t read as a patch.
Rust Stabilization and Prevention
Surface rust on an iron gate is cosmetic until it isn’t. We grind to clean metal, weld repair any pitting that compromises structural integrity, then apply a zinc-rich primer and topcoat rated for western Washington’s precipitation cycle. A gate near the Stillaguamish River floodplain needs this more aggressively than one on higher ground in North Arlington.
Hinge and Latch Realignment
Iron gates are heavy. When the hinge barrel elongates or the post settles, the gate drags. We bore and bush worn hinges, or re-weld new barrels, then rehang with proper clearance so the gate swings free without the motor fighting gravity.
Trusted Brands We Service in Arlington
We stock parts and carry factory training for nine gate motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Arlington customers, this means we’re not ordering a Viking gearbox or Ghost Controls control board and making you wait four days. Our Seattle parts depot keeps common failure items, limit switches, and replacement arms in rotation. A DoorKing 9100 series with a failed actuator, or an Elite CSW24 with a stripped worm gear, both get same-visit resolution when the parts are already on the truck. We match the right technician to the brand installed at your property so we’re not learning your system at your expense.
Common Gate Repair Problems We See in Arlington Homes
- Moisture intrusion in control boxes. Arlington averages 47 inches of annual rainfall, and the valley fog sits heavy November through February. We replace corroded terminal blocks and relocate vulnerable enclosures to higher mounting positions with proper drip loops on conduit.
- Post heave from clay-heavy soils. The glacial till around Arlington expands and contracts with seasonal moisture. Gates on 4×4 posts loosen and rack. We extract and re-set posts in concrete piers below the frost line, or upgrade to steel posts where the gate weight demands it.
- Operator strain from unbalanced gates. Homeowners in newer developments like Glacier Peak install decorative steel gates that weigh more than the original spec. The motor overheats, the limit switches drift, and the gate stalls mid-cycle. We rebalance the leaf and resize the operator if needed.
- Remote interference near cellular and airport equipment. Properties under the flight path or near newer cell tower installations sometimes experience intermittent radio frequency conflict. We diagnose whether the issue is the receiver, antenna placement, or environmental interference, then relocate or shield accordingly.
Pricing for Gate Repair in Arlington, WA
We believe you should know what gate repair costs before you call, not after we’ve opened the job.
| Service | Typical Range in Arlington |
|---|---|
| Hinge adjustment or minor weld repair | $180 – $280 |
| Gate realignment (post reset, track adjustment) | $240 – $420 |
| Operator diagnostic and limit switch replacement | $280 – $450 |
| Full motor replacement (operator only) | $650 – $1,400 |
| Access control keypad or loop detector repair | $180 – $340 |
What moves the number: gate material and weight, accessibility for our welding equipment, whether the post has rotted or heaved, and whether the operator is a current model with available parts. We inspect, diagnose, and deliver a written price. You approve it. Then we work. The price does not change at completion. Estimates are free. Call (469) 530-2485 to schedule.
We Also Serve Cities Near Arlington
Our crews work throughout Snohomish County and north into Skagit. We regularly service properties in Arlington, Marysville, Granite Falls, Lake Stevens, and Stanwood. If your gate issue is urgent and you’re on the border between service areas, call us. We route dispatch by proximity and current job location, not by rigid territory lines.
Serving Arlington, WA – Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Arlington
We typically schedule Arlington gate repairs within 24 hours, and emergency calls get same-day dispatch when the situation involves a security or safety concern. Our Seattle coordination office routes the nearest available technician based on current job locations, not a fixed depot distance. Call (469) 530-2485 and we’ll give you a firm arrival window.
Yes. We service gates from downtown Arlington and the Glacier Peak subdivision out to rural properties on Jordan Road, Trafton, and along the Mountain Loop Highway corridor. Our trucks carry generators and welding equipment so we’re not dependent on shop power for field repairs.
Yes. A live person answers our phones 24 hours a day, every day of the year, including weekends and holidays. If your gate is stuck open, stuck closed, or creating a safety hazard, we dispatch for emergency repair. The 365-Day Done Right Promise applies to emergency work exactly as it does to scheduled appointments.
Pricing is consistent across our Snohomish County service area. A hinge repair in Arlington costs the same as a hinge repair in Marysville. The only variables are the specific gate condition, materials needed, and access difficulty, not the ZIP code. We publish our ranges so you can verify this yourself.
Every repair carries our written 365-Day Done Right Promise. If the same component or repair fails within one year of service, we return and fix it at no charge. No re-diagnostic fee, no parts markup, no argument. This is standard on every job, not an upsell. The guarantee date is printed on your invoice. Call (469) 530-2485 if you need warranty service, and we’ll schedule the return visit.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Arlington and the greater Seattle region under The Garrison Standard since 2008.