Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Glendale
Gate repair in Glendale typically runs $180 – $650 depending on whether we’re resetting a hinge post, replacing a limit switch, or rebuilding a slide gate track. Most repairs are completed the same day we arrive. If your gate is binding, sagging, or the operator runs but the panel won’t move, call us at (469) 530-2485. We know Glendale’s older alleys and tight garage aprons better than any generalist contractor will.
Glendale homeowners deal with a specific problem: original 1920s – 1940s garage aprons sit nearly level with the sidewalk and alley, which means swing gate arms have almost no clearance. A gate that scrapes concrete often isn’t a gate problem at all. It’s the hinge post tilting out of plumb, and that’s the first thing our technicians check when they pull up to a Glendale address.
Why Carver Gate Repair Is Glendale’s Preferred Gate Repair Company
We run on Gate Repair work exclusively. No general handyman calls, no fence work, no “we also do kitchens.” Every technician who arrives at a Glendale home has a background check on file, arrives in uniform, and hands you a written price before the first tool comes out of the truck.
That written price matters in Glendale because so many homeowners here have already paid for a repair that didn’t hold. Our fix for that is simple: the price you approve is the price on the invoice, and every repair carries a written guarantee for a full year. If it fails inside that window, the second visit costs you nothing.
Lonnie Burke runs our operations. He built the Glendale crew around one rule: answer the phone, show up when you say you will, and stand behind the work in writing. Dispatch for Glendale is coordinated from our Los Angeles office, but the technicians and the parts are local. We stock FAAC, BFT, and Linear components so a Glendale repair doesn’t wait on a shipment from out of state.
Sliding Gate Repair in Glendale
Sliding Gate Repair in Glendale usually involves an operator that’s running but a panel that won’t travel the full track line. On older Glendale properties, the track itself has settled or shifted because the original apron poured in the 1930s wasn’t built for the weight of a modern steel panel. The operator gets blamed, but the track is the real fault.
A typical sliding gate repair in Glendale runs $220 – $580. That range covers track realignment, replacing worn rollers, rewiring a loop detector, or swapping a failed limit switch. When the operator itself has gone down, we replace it with equipment matched to the brand already installed, so you’re not paying for a full re-rig.
Track Realignment and Roller Replacement
When a slide gate binds halfway through its arc, the first thing we do is run a level along the track line. Glendale’s older alleys settle unevenly, and a quarter-inch dip is enough to stop the panel. We shim and reset the track, replace worn rollers, and test the full travel before we call the job done.
Loop Detector and Limit Switch Diagnosis
Slide gate operators in the 91202, 91203, and 91206 areas fail intermittently more often than they fail outright. The gate reverses, or it opens three feet and stops. That’s usually a loop detector wiring issue or a limit switch that’s lost its setting. We test the circuit before recommending a part replacement, because the repair should cost $180, not $900.
Wrought Iron Gate Repair in Glendale
Wrought Iron Gate Repair in Glendale often means hinge posts pulling loose from shallow 1940s footings. The gate panel itself is usually fine. The post is the problem. We reset the post in concrete, correct the sag, and re-hang the panel so it clears the apron the way it did when the house was built.
Expect to pay $250 – $650 for wrought iron work in Glendale. That covers post resetting, weld repair on cracked joints, or realigning a double swing gate so both panels close square. If rust has eaten through a bottom rail, we cut out the bad section and weld in new steel before repainting the repair.
Hinge Post Reset and Gate Realignment
When a wrought iron gate drags at the end of its arc, the hinge post has pulled out of plumb. We expose the footing, reset the post in fresh concrete, and let it cure before re-hanging the panel. It’s the only fix that lasts on Glendale’s older properties.
Weld Repair and Rust Treatment
Wrought iron gates on Glendale homes built before 1950 often have original welds that have cracked from decades of thermal cycling. We grind out the old weld, run a new bead, and treat the surrounding metal for rust. The repair gets primed and painted to match, so it doesn’t look like a patch job.
Trusted Brands We Service in Glendale
Our technicians carry parts for FAAC, BFT, Linear, and Viking operators, which covers most of what’s installed on Glendale’s older gates and the newer ones going in on hillside properties. Matching the repair to the brand already on your gate means we’re not adapting universal parts or rewiring a system that was never designed for them. For Glendale homeowners with a LiftMaster or DoorKing operator, we can usually have the correct part in hand the same day through our local supply network.
Common Gate Repair Problems We See in Glendale Homes
- Hinge posts pulling out of shallow footings. Homes built in the 1920s through the 1940s often have footings only a foot deep. The post tilts, the gate drags, and the operator keeps running until something bends or breaks.
- Slide gates losing track alignment on settled alleys. The original apron has shifted over 80 years of rain and traffic. The panel binds, the operator faults, and the gate won’t open past halfway.
- Loop detectors failing intermittently on older LiftMaster and FAAC operators. The wiring wears through where it enters the conduit, or the track is unlevel enough that the detector reads a false obstruction.
- Wrought iron rust-through on bottom rails. Glendale’s dry summers and wet winters cycle paint and metal until the bottom rail crusts through. We cut out the section, weld in new steel, and repaint to match.
Pricing for Gate Repair in Glendale, CA
Gate repair in Glendale runs $180 – $650 for most jobs. A hinge post reset typically falls between $300 and $500. Track realignment on a slide gate runs $220 – $400. Operator replacement, when the unit is beyond repair, starts around $800 and goes up with the brand and horsepower. Photo-eye replacement runs $150 – $250 including the part.
What moves the number: the age of the footing, whether the panel needs welding, and whether we’re repairing or replacing the operator. You get a written price before any work starts, and that price doesn’t move. Estimates are free. Call (469) 530-2485 and we’ll give you a straight number.
We Also Serve Cities Near Glendale
Our crews cover Glendale and the surrounding neighborhoods every day. We also run calls to Burbank, West Hollywood, Altadena, and Pasadena. If you’re just outside the city line, call us anyway. Chances are we already have a truck within fifteen minutes of you.
Serving Glendale, CA – Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Glendale
The hinge post has pulled out of its footing, usually because the original concrete from the 1920s – 1940s is only a foot deep and has cracked over time. The panel sags, the operator keeps running, and the arm drags or binds. We reset the post in fresh concrete rather than shimming the panel, because the shim fix fails again within a year. Call (469) 530-2485 for an exact quote.
Yes. Every automatic gate we repair or install in Glendale gets UL 325 compliant entrapment protection, which means photo-eyes, edge sensors, or both depending on the gate type and operator. We run reversal testing before we leave the job. That’s not an upsell. It’s the code requirement and the only way we’ll put a gate back in service.
Usually yes. The fault is typically a loop detector reading false obstructions, a worn limit switch, or an unlevel track section that binds the panel. We test the circuit and run a level on the track before replacing anything. In most Glendale repairs, the operator itself is fine. Call (469) 530-2485 and describe what the gate is doing. We’ll tell you what to check before we even send a truck.
Almost never. On Glendale’s older properties, the apron has risen or the hinge post has tilted, and the panel doesn’t have the clearance it once had. The fix is resetting the post or re-hanging the panel, not replacing the gate. We’ll remove the panel, reset the post, and re-hang it so it clears the apron through the full swing. Estimates are free.
Yes, on properties where running conduit to the gate isn’t practical or the panel is too far from the house. We install solar operators matched to the brand already on site, with a battery backup sized for Glendale’s sunny winters and the occasional overcast stretch. Installation is measured and scheduled, not same-day. We’ll come out, take measurements, and give you a written price before any work starts.
Call Carver Gate Repair for Gate Service in Glendale
If your gate is binding, sagging, or the operator runs but the panel won’t move, call (469) 530-2485. We answer the phone around the clock, every day of the year. A real person takes the call, schedules the visit, and a uniformed, background-checked technician arrives with a written price in hand. Every repair is guaranteed in writing for a full year. That’s the Garrison Standard, and it’s how we work in every Glendale neighborhood from the 91202 hillsides to the flat lots along Colorado Boulevard.
Written by Lonnie Burke, Owner at Carver Gate Repair, operating to The Garrison Standard since 2008.