Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Greenacres
Gate repair in Greenacres usually costs between $180 and $650 depending on what failed, and most motor and hinge repairs are finished in a single visit. If your gate is stuck, sagging, or refusing to reverse, our techs work on the problem the same day in most cases. We coordinate dispatch from our South Florida office, but the crews live in the area and know Greenacres streets, from the older blocks off Jog Road to the developments north of Lake Worth Road. Call (469) 530-2485 and a live person answers, 24/7.
Greenacres gates take a beating from the wet season. This page explains what actually fails here, what a proper fix includes, and what you should expect to pay before any work starts.
Why Carver Gate Repair Is Greenacres’s Preferred Gate Repair Company
Our Gate Repair team works on one trade: gates and gate motors. We don’t split our attention between pool cages, fences, and other jobs. That focus matters when a Viking operator won’t respond or a DoorKing swing arm has drifted out of travel. We train on nine motor brands, and we stock thermocouples, loop detectors, limit switches, and control boards in the trucks so a diagnosis doesn’t mean waiting a week for a part.
Homeowners in Greenacres call us because we answer the phone, show up in uniform, and hand over a written price before the first tool comes off the truck. That price doesn’t move at the door. Every repair carries a written guarantee good for a full year, and if the same repair fails inside that year, the second visit is free. No charge, no argument. The Garrison Standard has worked that way since 2008.
Lonnie Burke runs the crew, and he holds the same line on every job: clean site when we leave, operator tested for entrapment protection, and a gate that doesn’t sag again next season.
Wrought Iron Gate Repair in Greenacres
Wrought iron gate repair in Greenacres typically runs $220 to $580, and it usually means one of three things: the post has moved, a welded joint has cracked, or the hinges have worn enough to drop the leaf. We see all three constantly in neighborhoods like River Bridge and Nautica Isles, where the soil stays wet for months and the iron picks up surface rust faster than inland lots.
Post Movement and Re-Footing
A wrought iron gate leaf weighs anywhere from 150 to 400 pounds. When the hinge post shifts in sandy, saturated ground, the gate drops at the latch end and starts dragging across the driveway. Straightening the panel alone fixes nothing. We dig out the old footing, set the post deeper with a wider pour, and brace it level before re-hanging the leaf.
Cracked Welds and Rust Repair
Greenacres humidity and afternoon thunderstorms mean bare steel rusts fast. A stress crack at a rail joint will only spread. Our techs grind the area back, re-weld the joint, and repaint with a rust-inhibiting primer before the finish coat. Expect $140 to $320 for a typical weld-and-touch-up job, depending on access and how much rust has to come off first.
Metal Gate Repair in Greenacres
Metal gate repair in Greenacres covers aluminum, steel tube, and chain-link frame gates, and typical repairs land between $150 and $450. These gates fail differently than wrought iron. Aluminum tube gates bend at the mid-rail when a lawn crew or delivery truck bumps them. Steel frame gates rust through at the bottom rail where irrigation water sits against the metal.
Straightening and Realignment
A bent aluminum gate can often be straightened cold and re-hung on new hinges same day. If the damage is at a welded corner, we cut the joint, square the frame on the ground, and weld it back before reinstalling. Greenacres homeowners near Okeeheelee Park tell us the real test is whether the gate still latches after a few days of rain; a proper repair holds through the wet season.
Hinge, Latch, and Roller Work
Gate hinges in Greenacres take on fine sand, rust, and fertilizer dust. We replace worn barrel hinges, adjust the latch strike, and grease or replace rollers on slide gates so the gate moves without dragging. Most hinge and latch repairs are done in under two hours and cost $150 to $280.
Trusted Brands We Service in Greenacres
We keep trucks stocked for the operators Greenacres homes already have. Viking, Ghost Controls, DoorKing, and Elite are the ones we open up most often on a service call here, whether it’s a bad capacitor, a blown fuse on the control board, or a limit switch that’s lost its setting. Stocking local parts means we usually finish the repair on the first visit instead of ordering from a distributor and coming back next week. If your operator is older or discontinued, we’ll tell you straight whether it’s worth repairing or time to replace.
Common Gate Repair Problems We See in Greenacres Homes
- Hinge post lean from saturated soil. Greenacres sits on sandy, high-water-table ground. After a few wet seasons, the post holding your gate leaf starts to lean, and the gate drags or won’t latch. Fixing the panel without re-setting the post guarantees the sag returns within a season.
- Photo-eyes and edge sensors knocked out of line. Hedge trimmers and lawn crews bump the sensors, and the operator keeps running without valid UL 325 entrapment protection. That’s a safety failure, not just an inconvenience; we re-aim and test every sensor on every call.
- Corroded low-voltage wiring. Afternoon thunderstorms and irrigation overspray keep the ground wet around keypads and loop detectors. Water gets into the splice, the keypad stops reading codes, and the loop detector can’t see a car sitting on the pad.
- Control board failure after storms. Lightning strikes near Jog Road or Lake Worth Road can take out a gate board even when nothing else in the house is touched. We replace boards and reconfigure limits and force settings same day when the part is in stock.
Pricing for Gate Repair in Greenacres, FL
A service call to Greenacres runs $75 to $95, and most repairs land between $180 and $650 total. A pressure-fit hinge replacement or limit switch adjustment sits at the low end; a full operator replacement with a new swing arm and safety edges runs $900 to $1,700 installed. New gate installations in Greenacres typically start around $1,800 for a single swing leaf with a post footing and operator wiring, and climb from there based on gate size, material, and whether we’re trenching power across a yard with mature roots.
The price you get is the price you pay. We hand you a written quote before any work starts, and that number doesn’t change when the job is open. Free estimates are just that. Call (469) 530-2485 for a straight number.
We Also Serve Cities Near Greenacres
Our Gate Repair in Greenacres work takes us into the neighboring cities every week. We serve West Palm Beach, Wellington, Boynton Beach, and Palm Beach with the same crews, same written pricing, and same one-year guarantee. If your gate is in any of those cities, one call covers it.
Serving Greenacres, FL – Our Local Coverage Area
We’re based in the Greenacres area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Greenacres
Usually not. Most sagging gates in Greenacres come from a shifted hinge post or worn hinges, not a failed gate panel. We re-set the post footing, replace the hinges, and realign the leaf in one visit. You only need a new gate if the frame itself is rusted through or bent beyond repair. Call (469) 530-2485 and we’ll tell you which one applies to your gate.
The gate should reverse immediately when it hits a person, pet, or object, and it should stop closing if anything breaks the photo-eye beam. We test reversal force and all entrapment sensors on every repair. If a hedge trimmer knocked a photo-eye out of line, the operator may keep closing without protection; we re-aim and verify the safety circuit before we leave.
Yes, when the sun exposure and operator type support it. A solar conversion in Greenacres typically runs $400 to $900 for the panel, charge controller, and battery, plus the operator’s 12V conversion kit. South-facing gates with clear sky get the most reliable performance. We’ll measure your gate’s cycle count and tell you honestly whether solar is dependable or you’re better off running a low-voltage line.
We do both. On an install we handle the post and operator mounting, power run, safety edges, and full UL 325 entrapment testing before we call it done. A new operator installed in Greenacres usually runs $900 to $1,700 depending on the motor, arm type, and trenching distance. This is measured, ordered, and scheduled work, not a same-day rush job; free measure and written quote included.
We service and repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers nearly every operator installed across Greenacres. If your motor is off our list, we’ll tell you on the phone before you pay for a service call. Call (469) 530-2485 and describe what the gate is doing; a live person answers any hour.
For gate repair in Greenacres that shows up on time, hands you a written price, and stands behind it for a full year, call Carver Gate Repair at (469) 530-2485. Free estimates, no pressure, and a real person on the line.
Written by Lonnie Burke, Owner at Carver Gate Repair, operating to The Garrison Standard across Greenacres and South Florida.