Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hazel Dell
Gate repair in Hazel Dell usually means one of three things: a swing gate that sags and drags, an operator that hums but won’t move the gate, or a safety sensor that trips for no reason. Our Gate Repair crew handles all three, and we answer the phone 24/7 at (469) 530-2485. Most Hazel Dell repair calls are diagnosed and fixed in a single visit because we arrive with parts for nine major brands on the truck. We know the neighborhoods north of Vancouver along Highway 99, and we know the soil conditions that make some Hazel Dell gate posts shift over time.
Why Carver Gate Repair Is Hazel Dell’s Preferred Gate Repair Company
Background-checked, uniformed technicians show up for every Hazel Dell job. That’s not a marketing line. It’s The Garrison Standard, and it’s been the operating rule since 2008, before every job gets a written price. The number does not move at the door. If the repair fails within a year, we come back and fix it free under the 365-Day Done Right Promise. No charge, no argument.
Hazel Dell homeowners tend to find us after a generalist contractor treated a gate job as a side errand. We don’t work that way. Gates and gate motors are the only thing we do. When a customer near the Hazel Dell/Salmon Creek line calls about a double swing gate that drags on the driveway, we know to look past the hinges and check the post footing in the clay. That local read saves time and money.
Lonnie Burke oversees our operations, and he holds every technician to one standard: show up when you say you will, explain what you found, quote before you touch anything, and leave the job site clean. Hazel Dell customers call us back because that standard holds on every single visit.
Gate Welding in Hazel Dell
Gate welding in Hazel Dell repairs the steel and iron frames that hold swing and slide gates together. When a hinge tears loose from the frame or a lower crossmember cracks from years of wind load and wet winters, a bolt-on patch won’t hold. We cut out the failed section, weld in new steel, grind it clean, and coat it so the repair doesn’t rust out in the next rainy season. Typical gate welding work on a Hazel Dell residential gate runs $180 to $420 depending on the crack location, thickness of the steel, and whether the gate has to come off its hinges for the repair.
Frame and Hinge Plate Repair
Hinge plates on older Hazel Dell gates pull away from the frame after enough corrosion and use. We weld the plate back to fresh steel, not to the rusted edge. If the frame tube itself is rotted through, we sleeve or replace that section before re-hanging the gate.
Aluminum Gate Welding
Aluminum gates crack at the stile joints, especially where an automated opener pushes against a misaligned panel. We TIG-weld aluminum cracks and reinforce the joint so the repair holds under daily open and close cycles.
Commercial Gate Repair in Hazel Dell
Commercial gate repair in Hazel Dell covers slide gates, barrier arms, and swing gates on apartments, storage facilities, and small industrial lots along Highway 99 and around the I-5 corridor. These gates run far more cycles than residential gates, and the failures are usually predictable: a rack and pinion knocked out of alignment by settling concrete, a loop detector that won’t detect a truck, or a safety edge that fails the UL 325 entrapment check. Typical commercial gate repair in Hazel Dell runs $350 to $900 for most repairs. Motor replacement on a commercial slide gate typically lands between $1,200 and $2,800 installed, depending on the operator horsepower and brand.
Slide Gate Operator Service
When a Hazel Dell slide gate operator trips out after heavy rain, we check the rack alignment first. Settled post footings in wet clay throw the rack and pinion out of mesh, which overloads the motor. We re-set the post or adjust the rack, then run a full limit switch and safety loop test.
Loop Detector and Access Control Repairs
A failed loop detector means the gate won’t open for vehicles or won’t close after they pass. We test the loop, the detector board, and the wiring to isolate the failure. Then we replace only what failed, set the sensitivity, and verify the gate holds open for the correct vehicle length.
Trusted Brands We Service in Hazel Dell
We carry parts and programming knowledge for DoorKing, Elite, and Viking operators, plus the rest of our nine-brand service line. Hazel Dell homes and commercial properties have a mix of decades-old DoorKing slide operators and newer Viking swing systems. That matters because a technician who only knows one brand reaches for a universal part when the correct board is a two-day order. We stock common control boards, limit switches, photocells, and remotes for the brands already installed across Hazel Dell, so most repairs finish in one visit without waiting on a shipment.
Common Gate Repair Problems We See in Hazel Dell Homes
- Sagging swing gates that drag on the driveway. The hinge post shifts in the saturated clay soil after a wet winter. The hinges look fine, but the gate panel sits low. We dig down, re-set the post with a deeper and better-drained footing, and correct the sag before re-hanging the panel.
- Slide gate operators that trip out after rain. When a post footing settles, the rack and pinion alignment shifts and the motor pulls more current than it should. The fix is a realignment or a post re-set, not a band-aid reset.
- Safety photocells failing UL 325 entrapment checks. Gates installed before current standards often sit on steep Hazel Dell driveways where the photoelectric beam alignment drifts. We re-aim the cells, replace failed units, and test the reversal force before we close out the job.
- Hinge plates rusted loose from the frame. The Pacific Northwest’s wet-dry cycle eats unprotected steel. When the plate pulls off, welding is the fix, not longer screws into corroded metal.
Pricing for Gate Repair in Hazel Dell, WA
Expect gate repair in Hazel Dell to run between $180 and $420 for most residential fixes: sag correction, hinge plate welding, hinge replacement, and photocell alignment. Gate operator repairs, including limit switches, control boards, or remotes, typically land between $250 and $650. A full operator replacement on a residential swing or slide gate usually runs $850 to $1,800, with the motor, new safety sensors, and installation included. We give every Hazel Dell customer a written price before any work starts. That number is the number. Estimates are free, and you can call (469) 530-2485 to schedule one.
We Also Serve Cities Near Hazel Dell
Our crew covers Hazel Dell and the surrounding Clark County and Washington route. We also take gate repair calls from Seattle, Spokane, Tacoma, and Vancouver. If you’re on the edge of our Hazel Dell service area, call and the dispatcher will confirm coverage. For more on what we do across the region, see Gate Repair in Hazel Dell city details or call (469) 530-2485.
Serving Hazel Dell, WA – Our Local Coverage Area
We’re based in the Hazel Dell area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hazel Dell
If the gate sags only when the ground is wet and levels out in August, the hinge post is moving in the clay soil. That’s a post repair, not a hinge adjustment. Look at the post itself: if you can see fresh gaps around the concrete collar or the post leans toward the gate, the footing has failed. A hinge adjustment alone will last a few weeks, then the gate sags again. In Hazel Dell’s wet-dry clay cycles, a deeper footing with better drainage is the only lasting fix. Call (469) 530-2485 and we’ll diagnose it on site with a written quote before any work begins.
A gate that reverses mid-cycle is usually a failing safety photocell, a misaligned edge sensor, or a limit switch that’s lost its calibration. Hazel Dell’s rain and temperature swings knock photocell alignment out slowly. The operator reads the misaligned beam as an obstruction and reverses. We clean, re-aim, and test the photocells first. If they pass, we check the edge sensor and the closure force setting against UL 325 requirements. The repair typically runs $180 to $320, and we quote it before any work starts. Call (469) 530-2485 for a free estimate.
We install new gate operators in Hazel Dell as well as repair existing ones. A new swing or slide operator installation includes mounting the motor, running the power to the gate, installing new safety photocells and a wired or wireless edge sensor, and testing the reversal function. Installations are scheduled, not same-day, because they involve power runs and safety checks. Most residential operator installations in Hazel Dell run $850 to $1,800 complete. We measure, order, and install with a written price agreed before any work begins. Call (469) 530-2485 to book a free measure.
Yes. We repair commercial slide gates with loop detector issues across Hazel Dell, including the apartment complexes and storage facilities in the Highway 99 and I-5 corridor areas. We test the loop circuit, the detector board, and the wiring to find whether the fault is in the in-ground loop or the electronics. Most loop detector repairs run $350 to $700, and we stock replacement detectors for DoorKing, Elite, and Viking operators. We quote the repair before any work starts, and every repair carries the 365-Day Done Right Promise. Call (469) 530-2485 for a free estimate.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators in Hazel Dell. Most of the commercial slide gates we see around Hazel Dell run DoorKing or Viking, while residential swing gates lean LiftMaster and Ghost Controls. Having parts for all nine brands on the truck is why most repairs finish in one visit instead of two. Call (469) 530-2485 and tell us what brand is on the gate; we’ll confirm the parts are in stock before we dispatch.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Hazel Dell under The Garrison Standard since 2008.