Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Henderson
Gate repair in Henderson usually comes down to one of three things: a failed operator, a shifted post, or damaged wiring. The repair itself typically costs between $180 and $650 depending on what’s actually broken, and most repairs in Henderson are completed the same day we arrive. We say that up front because you shouldn’t have to guess what a service call will cost or how long you’ll wait. Gate Repair in Henderson is what we focus on every day, and our crews know exactly how this city’s soil, heat, and housing stock affect the gates we service. Call (469) 530-2485 and a real person picks up, day or night.
Why Carver Gate Repair Is Henderson’s Preferred Gate Repair Company
Homeowners in Green Valley, Anthem, Seven Hills, and MacDonald Ranch call us because we show up when we say we will and the price we quote is the price on the invoice. No moving numbers at the door. Our Henderson customers rate us highly because the technician who arrives is background-checked, uniformed, and trained on the gate system already installed at the house, not a generalist figuring it out as he goes.
We dispatch from our Las Vegas office, which means a Carver technician can reach most Henderson neighborhoods within 60 to 90 minutes for emergency calls. That’s not a promise we make lightly. It’s a function of having crews staged close and phones staffed by a live person around the clock, including weekends and holidays. For Henderson homeowners who’ve been burned by no-shows, that reliability is the difference between a gate that’s fixed today and a driveway left open for a week.
The Garrison Standard is the operating code behind every call. It means a written price before any work starts, a written guarantee on every repair good for a full year, and a free second visit if the repair fails inside that window. Lonnie Burke, who runs our Henderson service area, holds every technician to that standard. It’s not a marketing slogan. It’s how we run the work.
Metal Gate Repair in Henderson
Metal Gate Repair in Henderson is the call we make most often, usually because a steel or wrought-iron gate has started dragging on the driveway or pulling away from its hinges. The panel itself rarely fails. What fails is what’s underneath it: the hinge post footing, the weld points, and the buried wiring that controls the operator.
A typical metal gate repair in Henderson runs between $220 and $520 depending on whether we’re realigning the gate, repairing a hinge, or replacing a section of rusted frame. Weld and rust repair lands at the higher end, especially on older custom iron gates in neighborhoods like Green Valley Ranch where the sun and irrigation overspray have worked on the steel for years.
Hinge and Post Repair
When a metal gate sags, the hinge post has usually moved, not the gate itself. Henderson’s expansive clay soil expands when the monsoons hit and contracts during the 115°F stretches, which cracks and shifts the concrete around the post over time. We re-pour the footing, set the post plumb, and realign the gate so it swings clear. Fixing the panel without addressing the footing gets you a repeat call in six months.
Weld and Rust Repair
Rust is the quiet killer on Henderson metal gates. Irrigation water, pool chemicals, and dry desert air with occasional humidity spikes work on the lower rail and hinge plates. We grind out the corroded section, weld in new steel, and apply a rust-inhibiting coating matched to the gate’s finish. The gate doesn’t have to look patched; it should look like it did when it was installed.
Wood Gate Repair in Henderson
Wood Gate Repair in Henderson involves a different set of problems than metal. A wooden gate, often paired with stucco or board fencing, faces warping, splitting, and rot at the bottom rail where sprinkler overspray keeps the wood damp. The hot, dry air pulls moisture out fast, which causes boards to cup and hardware to loosen.
Expect a wood gate repair in Henderson to run between $180 and $420. Replacing a few warped pickets and tightening hardware sits at the low end. Rebuilding a gate frame or replacing a rotted post starts around $300 and goes up with the size of the gate. We give the written number before we touch a tool.
Frame and Post Replacement
A wood gate that drags on the ground more than an inch or two usually has a compromised frame. The joints have opened up, the post has begun to lean, or dry rot has taken the bottom rail. We remove the gate, reset or replace the post, square the frame, and rehang the gate so it swings true. The hinges and latch get replaced at the same time if they’ve been fighting the sag.
Gate Realignment
Sometimes a wood gate just needs to be pulled back into alignment. Hinges loosen, the post settles, and the latch stops catching. We adjust the hinges, add reinforcement plates where the wood has softened, and set the gate so it closes square. It’s a quicker fix, but it has to be done right or the sag comes back with the next heat wave.
Trusted Brands We Service in Henderson
Our technicians service gate operators from Linear, DoorKing, Viking, and Ghost Controls, which covers most of what’s installed across Henderson’s newer developments and older custom-home areas. We keep common boards, limit switches, and replacement arms in local stock so a repair doesn’t wait a week for a part to ship. If your system predates the current model line, we’ll source the right component and give you a firm price before ordering. The goal is to match the repair to the system you already have, not sell you a new operator because it’s easier for us.
Common Gate Repair Problems We See in Henderson Homes
- Hinge-post footing failure: Henderson’s expansive clay soil and the brutal summer heat cause the concrete around a hinge post to crack and shift. The gate panels stay straight, but the whole assembly leans, so the gate drags and the latch no longer lines up. A panel-only fix guarantees a repeat failure.
- Operator control board burnout from monsoon surges: Lightning-adjacent voltage spikes during the summer monsoons knock out LiftMaster and FAAC boards. The gate is stuck mid-travel, and the fix is a board replacement plus a surge suppressor so the next storm doesn’t do the same thing.
- Loop detector and safety photocell wiring damage: In neighborhoods like Green Valley with mature landscaping, constant irrigation moisture and shifting soil corrode or sever the buried sensor wires. The gate stops auto-closing and the entrapment protection goes dead, leaving the gate unsafe to operate.
- Worn limit switches on high-use gates: Henderson’s large lots and frequent vehicle traffic mean gates cycle many times a day. Limit switches wear out, so the gate stops short or over-travels. The switch is relatively inexpensive; ignoring it breaks the operator itself.
Pricing for Gate Repair in Henderson, NV
Here’s what Henderson homeowners can expect to pay. A basic service call and adjustment runs $95 to $180. Hinge or post repairs range from $200 to $450 depending on the footing work involved. Operator board replacements start around $280 and go to $550 for newer models. A full swing or slide operator replacement runs $850 to $1,800 installed, with the higher figure reflecting operators on long, heavy gates. Loop detector rewiring runs $150 to $350. Every job gets a written price before work starts, and the quote doesn’t change at the door. Our Gate Repair team gives free estimates, so call (469) 530-2485 and get a number you can plan around.
We Also Serve Cities Near Henderson
Henderson sits at the center of our service area. We also run calls to Boulder City, Las Vegas, North Las Vegas, and Laughlin. The same Garrison Standard applies everywhere: written price first, written one-year guarantee, and a live person on the phone 24/7. If you’re in one of those cities with a gate that won’t move, call (469) 530-2485.
Serving Henderson, NV – Our Local Coverage Area
We’re based in the Henderson area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Henderson
The sag comes back because the hinge post footing was never addressed. Henderson’s clay soil expands with monsoon moisture and contracts in the dry heat, which cracks and shifts the concrete around the post. The panel is straight; the post underneath it moved. A proper repair re-sets the post in a properly sized footing and only then realigns the gate. If a previous repair didn’t touch the footing, it was a temporary fix. Call (469) 530-2485 and we’ll check the post before quoting anything.
A complete gate operator replacement in Henderson runs between $850 and $1,800 installed, depending on the gate’s length, weight, and the operator brand. A board-only replacement is cheaper at $280 to $550. We give a written price before any work starts, so you’ll know the exact number before we begin. Estimates are free.
For most repair calls, yes. We dispatch from our Las Vegas office and can typically reach Henderson within 60 to 90 minutes for emergency situations like a gate stuck open. Some repairs, like a custom part or a full operator replacement on a heavy custom gate, may take a day or two to schedule. We’ll tell you on the phone what’s realistic for your specific gate. Call (469) 530-2485.
We service Linear, DoorKing, Viking, Ghost Controls, LiftMaster, FAAC, BFT, Elite, and Mighty Mule systems. That covers virtually every operator installed in Henderson’s residential communities, from the newer builds in Inspirada to the older custom homes in Green Valley. If your brand isn’t listed, call anyway; we’ll tell you straight if we can get the part.
Yes, it is dangerous. The safety photocells and loop detectors exist to stop the gate if a person, child, or pet is in the path. A failed sensor means the gate can close on someone, and that’s a serious injury risk. Don’t bypass the sensors or keep running the gate manually. We treat sensor failures as urgent calls and can usually reach Henderson the same day. Call (469) 530-2485 and we’ll walk you through what to check before we arrive.
Call Carver Gate Repair in Henderson
We were called to a home in Anthem where a LiftMaster swing gate had started screeching, then stopped opening entirely. The control board tested fine. The actual problem was a loop detector buried near the driveway, dislodged by soil movement from an irrigation leak. We reset and re-poured the post footing, realigned the hinge post, replaced the detector wiring, and tested the photocell and reversal per UL 325. That gate has run clean through two summers since. That’s the kind of repair we do in Henderson every week: find the real point of failure, fix it, back it for a year. Call (469) 530-2485 for a free estimate.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Henderson under The Garrison Standard.