Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Long Beach
Gate repair in Long Beach usually costs between $180 and $680 depending on what failed, and most jobs are completed in one visit. If your gate is dragging, sagging, or the motor has stopped responding, call (469) 530-2485 and a real person answers, day or night. We work on iron gates, sliding gates, and automatic operators across Long Beach, from Naples to Bixby Knolls, and we bring the parts with us so the repair usually happens the same visit, not a week later.
Salt air changes how gates fail here. We plan for it. That means marine-grade hardware, sealed operator boards, and a repair that’s written down and guaranteed in full for a year.
Why Carver Gate Repair Is Long Beach’s Preferred Gate Repair Company
Homeowners in Long Beach call us because the process is predictable. A background-checked, uniformed technician arrives on schedule. The gate is inspected. You get a written price before any work starts, and that number does not move at the door. Every repair carries the 365-Day Done Right Promise, a written guarantee good for a full year. If the same repair fails within that year, we come back and make it right at no charge. No argument, no invoice.
We work to The Garrison Standard, the same operating code that has governed Carver Gate Repair since 2008. Lonnie Burke built the company around a simple rule: written prices, clean job sites, and a phone line staffed by a live person 24/7. That matters in Long Beach, where a gate that won’t close on the 90803 peninsula or along the traffic-heavy corridors off PCH becomes a security problem before lunch. Dispatch is coordinated from our Los Angeles office, and crews serve Long Beach neighborhoods directly with local parts stock.
Iron Gate Repair in Long Beach
Iron gate repair in Long Beach almost always comes down to what the marine layer has done to the metal. We replace seized hinges, repair rust-jacked posts, weld cracks at the stile joints, and rehang the gate so the weight sits square on the hinge post instead of pulling it forward. A typical hinge and latch repair on an iron gate in Long Beach runs $220 to $480, while full post reset and welding work can run $500 to $950 depending on access and how much of the footing has corroded.
Hinge Replacement and Post Reinforcing
Near the water, plain zinc-plated hinges seize fast. Once they bind, the gate starts sawing back and forth on the hinge post every time it opens, and eventually the post tears out at the base. We cut out the old hardware, weld in reinforced plates where the post is sound, and set stainless hinges so the gate swings true.
Weld and Rust Repair on Iron Gates
Rust jacking at the bottom of an iron gate panel and along the bottom rail is common within a few blocks of Bluff Park and other coastal stretches. We grind back to solid steel, weld in new sections where the metal has thinned, and refinish so the repair doesn’t stand out as a patch job.
Sliding Gate Repair in Long Beach
Sliding gate repair in Long Beach means aligning the gate on its track, replacing worn rollers and bearings, and tuning the rack and pinion so the opener is not fighting the gate’s weight. Salt and grit from coastal air settle into the track and roller assemblies, which accelerates wear. A roller and bearing replacement on a residential sliding gate in Long Beach usually lands between $260 and $540. If the operator itself has failed, a motor replacement typically runs $650 to $1,200 depending on the brand.
Track and Roller Work
When sand and salt film build up on the V-track, the rollers grind instead of roll. That’s when you hear a metal-on-metal scraping and the gate starts to hesitate mid-travel. We clean and reset the track, replace the worn rollers, and adjust the gate so it moves quietly without forcing the motor.
Operator Alignment and Rack Adjustment
On long driveways in Los Altos or off Wardlow, a gate that has shifted a quarter-inch can make a LiftMaster or Ghost Controls operator draw too much current and trip its safety stop. We realign the rack and pinion, set the limit switches correctly, and test the clutch or force settings so the gate opens and closes without faulting.
Trusted Brands We Service in Long Beach
Our Gate Repair team is factory-trained on the systems already installed in Long Beach: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common boards, limit switches, loop detectors, and remote kits for these brands locally, which shortens repair time for Long Beach customers. Whether it’s a DoorKing slide operator on a commercial lot off Anaheim Street or a Viking swing arm on a Naples Island driveway, the right parts and the right know-how are already matched to your system.
Common Gate Repair Problems We See in Long Beach Homes
- Salt-seized hinges and latches. Painted steel hardware near the coast binds within a couple of seasons, and the gate starts to sag and grind against the post. Stainless replacement hardware stops the cycle instead of repeating it.
- Rust-jacked hinge posts. Corrosion at the base of a post lets the whole gate lean and pull away. We reset the footing, reinforce or replace the post, and rehang the gate to factory alignment.
- Intermittent operator faults. Humid salt air works its way into control boards, keypads, and photocell connections on LiftMaster and FAAC units, causing stoppages that come and go. We trace the fault, seal the connections, and replace the board when needed.
- Dragging slide gates. Grit and salt film in the track and roller assemblies force the motor to work harder, which trips the safety stop. Clean tracks, fresh rollers, and a properly tuned rack and pinion fix the problem at the source.
Pricing for Gate Repair in Long Beach, CA
Gate repair in Long Beach costs more near the water because the labor and materials have to account for salt exposure. Here’s what we typically see:
- Hinge and latch replacement on an iron gate: $220 – $480
- Sliding gate roller and bearing replacement: $260 – $540
- Gate motor replacement (LiftMaster, Viking, DoorKing, Ghost Controls): $650 – $1,200
- Full post reset with footing work: $500 – $950
- Weld and rust repair on an iron gate: $350 – $800
Every price is written down and agreed before any work starts. The estimate is free. If you want an exact number for your gate, call (469) 530-2485 and we’ll give you a written quote for the repair, not a range that grows once the job is open.
We Also Serve Cities Near Long Beach
Carver Gate Repair serves all of Long Beach plus the surrounding communities: Signal Hill, Carson, Seal Beach, and Lakewood. If your gate is failing and you need a technician who will show up with the right parts and a written price, our crews cover the full metro area. Call (469) 530-2485 and a live person schedules the visit.
Serving Long Beach, CA – Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Long Beach
Long Beach’s coastal marine layer carries airborne salt that settles on metal surfaces, and that salt film accelerates corrosion on hinges, latches, welds, and operator boards. Homes within a couple miles of the shore, in neighborhoods like Bluff Park, Naples, and the Peninsula, see galvanic and salt-induced rust years faster than homes further inland around Bixby Knolls or Lakewood. Plain zinc-plated hardware fails fastest; galvanized steel and stainless fixings hold up far longer. Call (469) 530-2485 for an inspection if your gate is showing rust or binding, and we’ll quote the right fix for a coastal location.
The rollers and track usually fail first on Long Beach slide gates because salt film and grit from coastal air settle in the track and accelerate wear at the bearings. Once the rollers bind, the gate drags, the motor draws more current, and the LiftMaster operator trips its safety stop. We inspect the track, replace the worn components, and realign the rack and pinion so the operator is not fighting the gate’s weight. Call (469) 530-2485 and we’ll schedule a visit with a written quote before any work starts.
Sagging at the hinge post usually means the post itself is failing below ground, often from marine corrosion eating the base of the post or the footing. The gate pulls the post forward and the whole assembly leans. This is a structural issue, not just a hinge adjustment. We reset the post footing, reinforce or replace the post, and rehang the gate square. Call (469) 530-2485 and we’ll come out, measure the lean, and give you a written price for the repair.
Yes. Every automatic gate repair in Long Beach should include an entrapment protection check: photocells, safety edges, and the operator’s force settings. We inspect and test this as part of the repair, not as an add-on. It’s a safety requirement under current standards, and a gate that reverses or stops only intermittently puts people at risk. Call (469) 530-2485 and we’ll include the entrapment check with your written quote.
For Long Beach coastal properties, galvanised steel holds up better than painted steel because the zinc coating sacrifices itself to corrosion before the base metal fails. Stainless steel fixings are worth the extra cost on hinges, bolts, and latches near salt air. We recommend and install marine-grade hardware on coastal Long Beach gates, and we quote the difference so you can decide with real numbers. Call (469) 530-2485 for a free written estimate on your gate.
Call Carver Gate Repair in Long Beach
Get a written price before any work starts, a background-checked technician at your gate, and a repair that’s guaranteed in writing for a full year. Call (469) 530-2485 now for a free estimate. A live person answers, day or night.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Long Beach and the surrounding metro area.