Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Maywood
Gate repair in Maywood usually costs between $180 and $480 for common fixes like realignment, hinge replacement, or limit switch adjustment. Full gate motor replacement runs higher, typically $650 to $1,400 depending on the operator. Most repairs in Maywood are completed the same day we arrive, and every job gets a written price before any work starts. If your gate is dragging, stalling, or refusing to close, call us at (469) 530-2485. We know Maywood’s streets, its lot sizes, and the particular ways gates fail here.
Why Carver Gate Repair Is Maywood’s Preferred Gate Repair Company
Maywood homeowners call us because the crew shows up when we say we will, and the price on the quote matches the price on the invoice. Lonnie Burke runs every job to what we call The Garrison Standard: background-checked technicians, written pricing, and a full-year guarantee on every repair. That guarantee is in writing, and if the repair fails inside twelve months, the second visit is free. No charge, no argument.
We work on the brands already installed in Maywood’s mixed housing stock: FAAC swing operators on older bent-iron gates, Linear units on newer slide installations, BFT hydraulic arms on multi-unit properties. Parts for these systems are kept stocked locally, so a repair near Atlantic Boulevard or Slauson Avenue doesn’t wait on a warehouse shipment across the county. A live person answers our phone around the clock, every day of the year, including weekends and holidays. When a gate motor dies at 6 a.m. and you need to get a car out, you talk to a dispatcher, not a voicemail box.
Driveway Gate Repair in Maywood
Driveway gate repair in Maywood covers the full mechanical and electrical path: hinge posts, gate leaf alignment, track systems, operators, limit switches, photocells, and the wiring between them. Maywood’s lots are compact, and many driveways sit tight against the sidewalk, which means a swing gate’s arc or a slide gate’s travel has very little room to spare. A gate that worked fine in a city with deeper front yards will bind or stall here if the original install didn’t account for the setback.
Slide Gate Track and Operator Issues
Short driveways in Maywood leave slide gates with limited run-up space. When the track was set without accounting for uneven sidewalk grades, the gate hits the end of its travel hard, or the rack skips teeth and the gate shudders. We realign the track, reset the rack, and adjust the limit switches so the gate stops cleanly.
Swing Gate Alignment and Post Work
Swing gates in older Maywood neighborhoods tend to sag as hinge posts pull loose from compacted clay soil. Welding the panel alone won’t fix a gate that’s binding because the post has shifted. We reset the post footing, re-hang the gate, and only then weld or shim the panel if it still needs it.
Gate Welding in Maywood
Gate welding in Maywood is the repair most often misdiagnosed by generalist handymen. A cracked weld on a steel gate frame is usually a symptom, not the root cause. The root cause is often a hinge post that moved, or years of the gate being forced open against a sagging track. We weld the frame, but we also fix what caused the crack so you are not calling us again in six months.
Frame and Hinge Reinforcement
Older Maywood gates are frequently welded from mild steel that has rusted at the joints. We grind back the corrosion, weld in reinforcement plate where the frame has thinned, and re-powder coat or paint the repair so it holds up in Maywood’s smog and sun exposure.
Rust Repair and Panel Replacement
When a gate panel has rusted through along the bottom rail, patching it buys a year at best. We cut out the rotted section, weld in new steel matching the original gauge, and treat the surrounding metal so the repair doesn’t become the next failure point. For wrought-iron style gates, we match the picket spacing so the repair doesn’t stand out.
Trusted Brands We Service in Maywood
Our technicians are trained on the gate operators most common in Maywood: FAAC, BFT, Linear, and Viking systems, among others. We carry local parts stock for these brands so a limit switch or control board replacement near Maywood Avenue or Slauson Boulevard doesn’t stall while a part ships from out of state. If your gate has a secondhand operator a previous owner installed, we can retrofit the missing entrapment protection to bring it up to UL 325 standard.
Common Gate Repair Problems We See in Maywood Homes
- Hinge posts pulling loose. Compacted clay soil in Maywood shifts with seasonal moisture, and older posts set in shallow concrete pull free. The gate sags, scrapes the driveway, and eventually binds against the latch post. Welding the panel alone won’t fix this; the post needs to be reset.
- Slide gates jumping the track. Short setbacks mean slide gates are often installed with barely enough track. When the gate hits the end stop hard, or when debris builds up in the track, the wheels lift and the gate derails. We reset the track alignment and adjust the end stops.
- Undersized or missing entrapment protection. Many Maywood gates were installed with secondhand FAAC or Linear operators that lack working photocells or safety edges. Under UL 325, a gate operator must reverse on contact or stop on obstruction. We retrofit the required safety equipment.
- Limit switches out of adjustment. When a gate over-travels at the end of its cycle, it strains the motor, slams the end stop, and eventually burns out the capacitor. This is especially common on Maywood’s short driveways, where the gate has little room to coast. We reset and test the switches.
Pricing for Gate Repair in Maywood, CA
Common gate repairs in Maywood run between $180 and $480. A hinge post reset typically falls between $250 and $500 depending on how much concrete work is involved. Gate welding repairs usually cost $150 to $450 by the time grinding, welding, and finishing are done. Full gate operator replacement runs $650 to $1,400, which includes the new motor, safety equipment, and labor. Slide gate track realignment costs $200 to $400 on most Maywood driveways. Every job gets a written price before any work starts, and that price doesn’t move. The quote we give you is the invoice you pay. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Maywood
Our Gate Repair crew covers Maywood and the surrounding area. We regularly run jobs in Bell, Huntington Park, Bell Gardens, and South Gate. If your property sits along the Maywood border and you’re not sure which service area you fall in, call us. Gate Repair in Maywood is the same crew and the same Garrison Standard no matter which side of the city line you’re on.
Serving Maywood, CA – Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Maywood
In most Maywood homes, the post is the problem. Clay soil shifts, the footing cracks, and the hinge post tips toward the driveway. The gate itself is usually fine. We can tell you which it is with a service call, and the fix is either resetting the post or, if the post is sound, re-hanging the gate with new hinges. Call (469) 530-2485 to schedule a look.
Yes. Under UL 325, which California adopts, automatic gate operators must have entrapment protection: either a reversing mechanism or photocells and safety edges. Many older Maywood gates were installed before these requirements were enforced, or with secondhand operators that lack them. We retrofit the required protection so the gate is compliant and safe.
Yes. Jumping the track is usually caused by misaligned track sections, worn wheels, or end stops set wrong for the short travel. On Maywood’s tight driveways, the gate has little room to recover when it over-travels. We reset the track, replace the wheels if needed, and adjust the stops so the gate stops cleanly every cycle. Call (469) 530-2485 for a quote.
Most repairs take 1 to 3 hours on site. Hinge post resets take longer because the concrete needs to cure before the gate is re-hung, so we may schedule a second visit a day or two later. A full gate installation is a different timeline: measured, ordered, and scheduled, typically 2 to 4 weeks from the first measure to the finished gate. We never promise same-day turnaround on an installation.
We service FAAC, BFT, Linear, and Viking operators, plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our techs are trained on all nine brands, and we keep local parts stock for the units most common in Maywood so repairs don’t wait on shipping. If you’re not sure what brand you have, we’ll identify it on the call.
Call for a Free Gate Repair Estimate in Maywood
If your gate is sagging, stalling, or refusing to open, call (469) 530-2485. We’ll give you a written price before any work starts, and that’s the price you pay. The repair is covered by our 365-Day Done Right Promise, in writing. A live person answers the phone, day or night.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Maywood under The Garrison Standard since 2008.