Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Rancho Palos Verdes
Gate repair in Rancho Palos Verdes costs between $220 and $680 for most common fixes, with motor replacement running $850 to $2,400 depending on the operator. We dispatch technicians from our Los Angeles office to Rancho Palos Verdes daily, and most repairs are completed in one visit. If your gate is stuck, dragging, or making noise it shouldn’t, call (469) 530-2485 for a written quote before any work begins.
We know this area’s gates fail differently than gates in flat inland cities. The Palos Verdes Peninsula sits on active landslide geology, and that changes how footings, posts, and operator pads behave over time. Our Gate Repair team accounts for ground movement before swapping parts, because replacing a hinge on a post that’s still creeping just means you’ll be calling again in six months.
Why Carver Gate Repair Is Rancho Palos Verdes’s Preferred Gate Repair Company
Homeowners in Rancho Palos Verdes call us because the price we quote is the price on the invoice. Every repair starts with a written price delivered before work begins, so there’s no negotiation at the door. That’s the Garrison Standard, and it’s been our operating rule since 2008.
The technicians we send to Rancho Palos Verdes are background-checked and uniformed. You’ll know who’s walking onto your property before they arrive, which matters when the person is working on the gate that secures your home. Calls are answered by a live person 24 hours a day, including weekends and holidays, so a broken gate on a Sunday morning doesn’t mean waiting until Monday for a response.
Lonnie Burke leads the team, and the standard he enforces is simple: every repair carries a written guarantee good for a full year. If the repair fails inside that window, we return at no charge. That’s the 365-Day Done Right Promise, and it’s printed on every work order.
Iron Gate Repair in Rancho Palos Verdes
Iron gate repair in Rancho Palos Verdes typically runs $260 to $520 for hinge and post work, with weld repairs adding $120 to $380 depending on the extent of the damage. Iron gates here face a specific problem: the coastal air carries salt, and the peninsula’s fog keeps moisture on metal longer than inland cities like Lakewood or Torrance. Surface rust is common, but the structural failures we see most often are hinge post fatigue and bottom rail sag caused by ground creep in the Portuguese Bend area.
Hinge and Post Work
A sagging iron gate almost always traces back to the hinge post. In Rancho Palos Verdes, that post is often set in soil that’s shifting deep below the surface, not just settling. We reset posts with deeper piers where ground movement is a factor, then re-hang the gate and adjust the hinges so the gate swings without dragging.
Weld and Rust Repair
When rust has thinned a bottom rail or broken a weld at a hinge, we remove the corroded material cleanly before welding. On gates with heavy salt exposure near the coast, we grind back to clean steel and weld in reinforcement where the old section failed. The finish won’t match exactly, but the structural integrity will hold.
Sliding Gate Repair in Rancho Palos Verdes
Sliding gate repair in Rancho Palos Verdes typically runs $300 to $700 for track, wheel, and alignment work, with rack and pinion replacement on the upper end of that range. Slide gates on this peninsula sit on footings that can tilt gradually as the ground creeps, and even a quarter inch of movement throws the rack and pinion out of alignment. The gate skips, grinds, and overworks the motor until something breaks.
Rack and Pinion Alignment
When a slide gate’s pinion gear skips over the rack teeth, the operator strains against its own mounting bolts. We realign the rack to the pinion, check the operator footing for tilt, and tighten the gear to the shaft. On properties in the landslide zone, we may recommend monitoring the footing after the repair.
Track and Wheel Service
Slide gate wheels wear unevenly when the track has settled. We inspect the full travel path, replace flat-spotted or seized wheels, and re-level the track where the ground has moved. The goal is a gate that rolls quietly with one hand, because that’s what a properly set slide gate should do.
Trusted Brands We Service in Rancho Palos Verdes
Our technicians in Rancho Palos Verdes work on FAAC, Linear, Viking, LiftMaster, BFT, DoorKing, Elite, Ghost Controls, and Mighty Mule operators. We keep common control boards, limit switches, and remotes stocked on our service vehicles, so a failed FAAC board or a dead Linear receiver doesn’t mean waiting a week for a part to ship. If we need something less common, we source it and return to finish the job as soon as it’s in hand.
Common Gate Repair Problems We See in Rancho Palos Verdes Homes
- Hinge post failure from ground creep. The Portuguese Bend landslide complex is still moving in places, and that movement twists posts and footings over time. A swing gate that drags on the driveway after years of working fine is usually a post that’s rotated, not a hinge that’s simply worn out.
- Rack and pinion misalignment on slide gates. Settling or creeping footings tilt slide gate operators, and the pinion gear starts skipping over the rack. You’ll hear a rhythmic grind when the gate moves, and the operator will wear out prematurely if it isn’t corrected.
- Entrapment protection faults. Coastal fog and wind push debris into photoelectric sensor paths, and shifting ground can knock sensors out of alignment. A gate that reverses for no reason, or refuses to close, often has a sensor or loop detector fault rather than a motor problem.
- Motor failure from overwork. When a gate binds and the operator keeps pushing against it, the motor burns out faster than it should. The fix is correcting the alignment or footing first, then replacing the motor if it’s already damaged.
Pricing for Gate Repair in Rancho Palos Verdes, CA
Here are the ranges we charge in Rancho Palos Verdes for the work we’ve described on this page:
- Iron gate hinge and post repair: $260 – $520
- Weld and rust repair: $120 – $380
- Sliding gate track and wheel service: $300 – $500
- Rack and pinion realignment: $350 – $700
- Gate motor replacement: $850 – $2,400, depending on operator brand and horsepower
- Safety sensor or loop detector repair: $180 – $400
What changes the price is the extent of the damage and whether the footing or post needs to be reset, not the technician’s mood at the door. You’ll get a written price before any work starts, and that number holds. Estimates are free, and you can call (469) 530-2485 to schedule one.
We Also Serve Cities Near Rancho Palos Verdes
Our technicians cover Rancho Palos Verdes and the surrounding South Bay cities. We handle gate repair in Lomita, Lakewood, Redondo Beach, and Torrance, with the same written pricing and full-year guarantee on every job. If you’re in any of these cities, the number is the same: (469) 530-2485.
Serving Rancho Palos Verdes, CA – Our Local Coverage Area
We’re based in the Rancho Palos Verdes area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Rancho Palos Verdes
Yes. If you’re in or near Portuguese Bend, the ground itself may be moving beneath your gate posts or operator footing. A gate that suddenly drags after years of working fine is often a post that’s rotated or a footing that’s tilted, not just a worn hinge. We assess the footing and post before replacing hardware, because repairing hardware on a moving post just repeats the problem. Call (469) 530-2485 for an evaluation.
Yes. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. If your system is one of those nine brands, we have the training and local parts to fix it. If it’s something else, call us and we’ll tell you honestly whether we can help.
Yes. Automatic gates must have entrapment protection that meets current UL 325 standards, which typically means photoelectric sensors, reverse edges, or both, depending on the gate type and installation date. A technician should test these on every repair. This is not optional equipment, and we won’t leave a gate running without working safety protection.
A proper installation includes the post or footing work (dug to a depth appropriate for the soil conditions, which matters in landslide areas), the gate itself, the operator and its mounting pad, the power run, safety edges or photocells, and full reversal testing before we leave. We never promise same-day turnaround on an installation. We measure, price the work in writing, schedule it, and build it right. Call (469) 530-2485 for a free measure and written quote.
Most common repairs, like hinge work, sensor alignment, or track adjustments, are done in one visit of two to four hours. If a footing needs to be reset or concrete needs to cure, the job may take longer, and we’ll tell you that in the written quote before starting. Call (469) 530-2485 and we’ll give you an honest time frame for your specific gate.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Rancho Palos Verdes under the Garrison Standard since 2008.