Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Southlake
Gate repair in Southlake usually falls into two buckets: the gate itself is sagging, dragging, or binding, or the motor and controls have stopped responding. Most jobs we handle across Southlake run $180 to $650 for hinge, post, and alignment work, while operator and control-board repairs typically land between $240 and $900 depending on the motor model and what failed. Our crews know Southlake’s gated estates, long driveways, and heavy ornamental gates, and we answer the phone live around the clock at (469) 530-2485.
The Garisson Standard applies to every visit: a live person takes your call, a background-checked uniformed technician arrives in a marked van, and you get a written price before any work starts. That price does not move at the door. Southlake homeowners have enough to manage without wondering whether the gate technician is actually going to show up.
Why Carver Gate Repair Is Southlake’s Preferred Gate Repair Company
Homeowners around Southlake call us because gate work is all we do. We are not a general handyman service that occasionally touches a gate operator. Our technicians work on nine motor brands including Viking, Ghost Controls, and DoorKing, and they see Southlake’s specific failure patterns every week. The neighborhood names our dispatchers hear regularly include Estes Park, Clariden Ranch, Monticello, and the gated sections along White Chapel Boulevard and Continental Boulevard. When a swing gate stops halfway across a driveway on Dove Road, the driver needs a crew that knows where Dove Road actually is.
Our Southlake customers consistently mention three things in their reviews: the technician showed up when promised, the written price held, and the gate worked when the crew left. Lonnie Burke runs our operation to that standard. Every repair carries a written 365-Day Done Right Promise. If a repair fails inside that year, we return and make it right at no charge. That guarantee is in writing on every job ticket, not just mentioned on a website.
Response time to Southlake is typically same-day for repair calls, and emergency service is available 24 hours a day. A stuck-open gate on a property with kids or dogs is not something we expect you to live with until Monday.
Driveway Gate Repair in Southlake
Driveway Gate Repair on Southlake’s estate lots usually means one thing before anything else: checking the hinge posts before touching the panel. The city sits on expansive North Texas clay that swells after rain and shrinks during dry spells. Timber and stone gate piers set into that soil shift over time. The panel itself is often fine. The post underneath it is not. We see this on the long, sloped driveways off Southlake Boulevard and along Highland Oaks Drive far more than on smaller flat suburban lots.
Post-Footing Correction and Gate Realignment
When a post moves, the gate sags at the latch side or scrapes the driveway. The right fix is re-setting the post footing in new concrete, then realigning the gate so the hinges carry the load evenly. On a heavy ornamental-steel gate, this is not a one-hour job. It typically runs $350 to $900 depending on post size and how much demolition the old footing requires.
Operator Strain on Heavy Panels
Many Southlake gates are oversized steel or cedar panels on long drive runs. An undersized swing operator strains against that weight every cycle. The motor runs hot, the capacitor fails, or the control board burns out. Replacing the operator with one rated for the gate’s actual weight and duty cycle is the only cure, and that work runs $650 to $2,400 including labor and programming.
Gate Welding in Southlake
Gate Welding in Southlake is common on ornamental steel gates from the 1990s and 2000s, where the side rails or pickets were never beefy enough for years of daily cycling. We regularly see fatigue cracks at the hinge brackets and where the operator arm attaches to the gate frame. The climate accelerates this too: North Texas heat and humidity cycles rust the mild steel most decorative gates are built from, especially where paint has chipped at the welds.
Crack Repair and Steel Reinforcement
A cracked gate is a safety problem, not just a cosmetic one. The panel flexes under load and puts uneven stress on the operator and hinges. Our welders grind out the bad weld, re-weld the joint, and often add a gusset plate so the same crack does not return. Typical welding repairs run $200 to $600 per section depending on access and how much grinding is needed.
Rust Treatment and Structural Patches
Where rust has thinned the steel, we cut out the damaged section and weld in fresh plate before priming and painting to match. Leaving rust in place just means paying for the same repair again in two years. We quote this work up front and tell you exactly what we found under the paint once the grinder hits it.
Trusted Brands We Service in Southlake
Southlake gates run on a mix of operators depending on when the house was built and who did the original install. We service and stock parts for Viking, Ghost Controls, DoorKing, and Elite systems, along with several others. Having parts on the truck matters here. A Viking swing operator on a Southlake driveway should not wait four days for a capacitor to ship from out of state. We keep the common failure parts for these brands in local stock, which is why most Southlake motor repairs finish the same day the technician arrives.
This page is our Gate Repair in Southlake guide for homeowners who want to understand what is actually wrong before the truck pulls in. If you want to see how this fits into the wider service area, our Gate Repair hub covers the full diagnostic and repair process.
Common Gate Repair Problems We See in Southlake Homes
- Hinge-post movement from expanding clay. Southlake’s soil swells after spring rain and shrinks in August heat. Gate piers shift, the gate sags, and the panel scrapes the driveway even though nothing is bent. The fix is post-footing correction, not just raising the hinges.
- Undersized operators on heavy steel and cedar gates. A residential-grade operator cannot cycle a 900-pound ornamental gate ten times a day for years. The motor burns out, the board fails, or the gearbox strips. We install operators sized for the gate’s actual weight and duty cycle.
- Entrapment-protection faults. Misaligned photoelectric sensors, dead edge sensors, or a loop detector that no longer sees a vehicle will stop a gate mid-cycle or keep it from closing. Under UL 325, these safety inputs must be working before the gate goes back into automatic service. We test every sensor and reversal on every repair.
- Weld fatigue at the hinge brackets. Years of cycling work-harden the steel at the hinge and operator attachment points. Cracks start small, then the panel twists. Welding the crack without addressing the alignment means it returns.
Pricing for Gate Repair in Southlake, TX
Most hinge, post, and alignment repairs in Southlake run $180 to $650. Gate welding and steel repair typically lands between $200 and $600 per section. Operator and control-board repair runs $240 to $900, and a full operator replacement on a heavy gate starts around $650 and can reach $2,400 depending on the motor. A complete new automatic gate installation in Southlake, including groundworks, power, safety edges, and testing, generally lands between $4,500 and $14,000. That is not a same-day job. It is measured, ordered, and scheduled, and we give you a written price before any work begins. Estimates are free. Call (469) 530-2485 and we will tell you exactly what it costs for your gate.
We Also Serve Cities Near Southlake
We work throughout the Southlake area, including Colleyville, Grapevine, Flower Mound, and Roanoke. If your gate is on the edge of town or you have a property in one of the surrounding communities, the same crews and the same written pricing apply. Dispatch is coordinated from our Dallas-Fort Worth office, and crew routes cover Southlake daily.
Serving Southlake, TX – Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Southlake
On Southlake’s clay soil, it is usually the post. The expansive clay shifts the gate pier, the hinge side drops, and the panel scrapes the driveway. A technician has to check the post plumb and the footing before adjusting the panel. If the post moved, panel adjustment alone will fail again. Call (469) 530-2485 for an inspection and a written price.
A full installation includes the concrete footings and groundworks, the trench and conduit for low-voltage power and safety wiring, the gate panel or panels, the operator sized for the gate’s weight, safety photocells and edge sensors, loop detectors where required, and full UL 325 entrapment-protection testing before the gate goes into automatic mode. It typically runs $4,500 to $14,000 in Southlake. Installation is scheduled work, not same-day. We provide a free measure and a written quote.
We service Viking, Ghost Controls, DoorKing, and Elite operators, along with several other major brands. We stock common failure parts on the truck so most motor and board repairs finish the same day. Call (469) 530-2485 and we will tell you what operator you have and what it needs.
The first suspects are the safety inputs: misaligned photocells, a dead edge sensor, or a loop detector that no longer sees the vehicle. Under UL 325, if any of these inputs is faulted, the gate will refuse the close command. It might also be a limit switch out of adjustment. We diagnose and repair these faults, and under our 365-Day Done Right Promise the repair is covered in writing for a full year. Call (469) 530-2485 for a free estimate.
We handle both. Our crews weld cracked steel, replace rusted sections, re-set shifted posts, and realign sagging panels, then re-test the operator and safety sensors so the whole system works together. A gate that is welded but still misaligned will destroy the new weld. We fix it as one repair. Call (469) 530-2485 for a written quote.
We were called to a gated estate off Highland Oaks Drive in Southlake where a heavy ornamental-steel swing gate had been dragging and stalling on a LiftMaster operator. The real fault was a shifting hinge post in the clay soil, not the panel. We re-set the post footing, then corrected the sag and re-tested the safety photocells and reversal before we re-set the limit travel. The gate now sweeps clean through its full arc and the operator’s amp draw is back where it should be. That sequence – post first, then panel, then safety testing – is the defining repair pattern across Southlake, because the soil here moves more than the gates do.
Written by Lonnie Burke, owner at Carver Gate Repair, serving Southlake under The Garrison Standard. If your gate is sagging, stalling, or stopped entirely, call (469) 530-2485. We answer live, quote written, and stand behind the work for a full year.