Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Sunnyvale
Gate repair in Sunnyvale typically runs between $225 and $750 depending on whether we’re re-setting a shifted hinge post, replacing a loop detector, or repairing a sagging panel. Most jobs are done in one visit. We schedule by appointment with a real arrival window, never a four-hour block, and you get a written price before any work starts. If your gate won’t open, won’t close, or scrapes the driveway, call (469) 530-2485 and a live person answers, any hour, any day. We’re the gate specialists for Sunnyvale property owners who want the job done once, correctly, with the price on paper not a moving target.
Why Carver Gate Repair Is Sunnyvale’s Preferred Gate Repair Company
Sunnyvale homeowners call us after they’ve been through the cycle: a technician shows up late, quotes one number, then the invoice creeps up once the gate is apart. That does not happen with Carver. We operate to The Garrison Standard: every job gets a written price before the first tool comes off the truck, every tech is background-checked and uniformed, and every repair carries a 365-Day Done Right Promise in writing. If the same problem comes back inside a year, we return and fix it at no charge. That’s not a marketing line. It’s the guarantee on your invoice.
Our crews serve Sunnyvale from a Bay Area dispatch office and know the neighborhoods: the Eichler tracts off Fremont Avenue, the ranch properties around Serra Park, the denser lots near downtown and Murphy Avenue. That local familiarity matters because gate failures in Sunnyvale follow patterns tied to soil, housing age, and how the original gate was set. We see the same failure points repeat across 94086, 94087, 94085, and 94089. That lets us diagnose faster and fix the actual problem instead of swapping parts and hoping.
Lonnie Burke runs the Carver Gate Repair operation, and he holds every tech to the same standard: leave the site clean, explain the repair in plain English, and document what was done. Sunnyvale customers get a written record of the work, not just a receipt. That record is what a professional job looks like.
Wrought Iron Gate Repair in Sunnyvale
Wrought iron gate repair in Sunnyvale usually means one of three things: a break at a weld joint, a corrosion problem at the base of a picket, or a hinge that has pulled loose from a post that’s lean. We repair all three. Wrought iron is durable, but Sunnyvale’s wet winters and foggy mornings off the bay put moisture against ferrous metal for months at a time. The joints that fail first are the ones where water pools: the bottom rail, the hinge plates, and the lock box. A typical wrought iron repair in Sunnyvale runs $275 to $600, depending on whether we’re welding a clean break or cutting out and replacing a rusted section. The price is written down before work begins and it does not change at the door.
Welding and Structural Repairs
When a wrought iron gate cracks, the correct repair is a dressed weld, not a patch plate bolted over the crack. We weld the break, grind it smooth, and match the finish so the repair doesn’t look like a repair. For gates with rust-through at the bottom of pickets or rails, we cut back to solid metal and weld in new steel matching the existing section dimensions. Then we treat, prime, and paint to match.
Hinge and Latch Reattachment
Most wrought iron hinge failures are actually post failures. The hinge plate is fine. The post it’s bolted to has moved. We re-set the post, re-anchor the hinge with a through-bolt or threaded insert rather than a lag screw, and re-hang the gate to clear the driveway correctly. A latch that won’t catch is usually an alignment problem caused by that same post movement, not a worn latch.
Metal Gate Repair in Sunnyvale
Metal gate repair in Sunnyvale covers steel, aluminum, and tubular gates: sagging panels, bent rails, failed welds, frozen adjusters, misaligned tracks, and operator brackets that have torn loose from the frame. We repair the gate itself, and we also fix what the gate is attached to, because in Sunnyvale those are the same job. A shifted post will destroy a repaired gate within a season. Typical metal gate repairs in Sunnyvale run $250 to $650, with motor or automation issues adding from there. The price on your quote is the price on your invoice, every time.
Gate Realignment and Panel Restoration
A metal gate that scrapes, binds, or won’t close against the striker is usually sitting on a post that has tilted. We don’t just adjust the hinges to compensate. We correct the root cause: re-set the post to plumb and depth, then re-align the panel so the gate travels its full arc without dragging. That’s what keeps the repair from becoming an annual event.
Operator Bracket and Track Repair
When a gate operator bracket rips out of a steel gate, the cause is almost always repeated stress on a gate that wasn’t swinging or sliding freely. We repair the panel, replace the bracket, and then run the gate through its full travel to confirm the operator is not fighting the gate. If we skip that step, the new bracket tears out the same way in a few months.
Trusted Brands We Service in Sunnyvale
Our techs are factory-trained on the gate operators most common on Sunnyvale properties: Linear, Viking, Ghost Controls, and DoorKing. That means we carry the right relays, limit switches, and control boards for those systems, and we can pull an operator into service without waiting a week on a shipped part. Gate Repair by Carver handles the full system: the motor, the arm, the controls, the safety devices, and the gate itself. When a Sunnyvale customer calls about an opener that stops mid-travel, we diagnose the whole circuit, not just the board the parts store sent.
Common Gate Repair Problems We See in Sunnyvale Homes
Sunnyvale’s housing stock is a mix of mid-century neighborhoods and newer infill, and the gate problems follow the age of the property. Here’s what we walk into most often:
- Sagging swing gate panels on 1960s and 1970s homes: Eichler and ranch-era properties often have hinge posts set only 18 to 24 inches deep in clay soil. As the clay swells and shrinks through wet winters and dry summers, the posts tilt and the gate sags. A panel-only fix fails again because the post is still moving.
- Operator faults on gates near downtown and Murphy Avenue: We routinely find a mis-aimed loop detector or a photocell that never got a weather seal. The operator gets replaced, the fault comes back. The fix was a $75 sensor adjustment, not a $600 board.
- Slide gates binding on narrow lots: Many Sunnyvale driveways aren’t level, and slide gate tracks were laid on unprepared ground. The gate binds, the rack and pinion wears unevenly, and the operators burn out. Replacing the rack without re-levelling the track guarantees a repeat failure.
- Corroded metal panels near the bay influence: Fog and marine air accelerate rust on unseated steel. Gates that should last 30 years are showing perforation at the base rail within 15. Welding in new steel early stops the rot from spreading to the whole panel.
Pricing for Gate Repair in Sunnyvale, CA
A standard gate repair in Sunnyvale falls between $225 and $750. Hinge and latch adjustments run $225 to $350. Weld repairs on wrought iron or steel run $275 to $600 depending on the number of joints and whether we’re replacing steel. Post re-setting and re-alignment runs $400 to $750 because it involves digging, footings, and precise re-hanging. Gate operator repairs run $275 to $900 depending on whether the board, arm, or motor needs replacement. A full operator replacement with installation runs $1,200 to $2,800 for a swing or slide system with new safety devices. Safety edges and photocells are priced separately and are required, not optional, on every automated gate. The estimate is free, it’s in writing, and the final invoice matches it.
We Also Serve Cities Near Sunnyvale
Carver Gate Repair handles gate work all along the Peninsula and South Bay. If your property is just outside Sunnyvale, we serve Mountain View, Santa Clara, Cupertino, and Los Altos with the same written-price process and the same full-year guarantee. See our Gate Repair in Sunnyvale page for details on everything included in a repair visit.
Serving Sunnyvale, CA – Our Local Coverage Area
We’re based in the Sunnyvale area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunnyvale
It’s usually the loop detector or the safety photocell, not the operator. A gate that opens but refuses to close is typically seeing an obstruction signal: a mis-aimed photocell, a failed loop detector reading a ghost vehicle, or a safety edge that’s shorted. We test those components before ever condemning the operator board. Call (469) 530-2485 and we’ll diagnose it on site, not sell you a motor you don’t need.
We fix the post. A sagging swing gate in Sunnyvale is almost always a post problem in our expansive clay, especially on mid-century properties where posts were set shallow. We re-set the post at proper depth, re-hang the gate, and only repair the panel if the panel shows actual damage. Fixing just the panel leaves the root cause in the ground. Every repair is quoted in writing before work starts.
A proper operator installation in Sunnyvale takes one full day, sometimes two for a double gate or a slide system with new photo sensors and a loop detector. We do not rush an install into a same-day window. The work includes mounting the operator, running or verifying the power feed, installing the required safety edges and photocells, and running UL 325 entrapment tests. That’s measured work, not a dispatch call. You’ll get a free measure and a written price first.
They are required by UL 325 and California law for any automated gate. A gate operator install without functioning safety edges and photo sensors is an incomplete and unlawful installation. If a previous installer skipped them or they’ve failed, we won’t put an operator back into service without them working. It’s also why we test them at the end of every automation repair, and document the test.
Yes, in most cases. A cracked weld, a rusted base rail, a torn operator bracket, a sagging panel: all of those are repairable for a fraction of replacement cost. We only recommend replacement when the gate is structurally compromised end to end, which is rare. If repair is possible, we write the repair price and do the repair. Call (469) 530-2485 for a free estimate and we’ll tell you honestly whether it’s a repair or a replacement.
Get Your Sunnyvale Gate Fixed Right. Call Now.
If your gate is sagging, stuck, or running the operator but not closing, the fix starts with a phone call to (469) 530-2485. A live person answers. You’ll get a written price, a background-checked uniformed technician, and a repair that’s guaranteed in writing for a full year. That’s The Garrison Standard, and it’s how every gate in Sunnyvale should be handled.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Sunnyvale through the Garrison Partners family since 2008.