Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across University Park
Gate repair in University Park typically runs $180 – $850 depending on the failure point, and most motor or hinge-post problems can be diagnosed and repaired the same day. We dispatch crews from our Dallas-Fort Worth office directly into University Park, including neighborhoods around Preston Road, Hillcrest Avenue, and the streets off Lovers Lane. Call (469) 530-2485 and a live person answers, 24 hours a day, every day of the year. No voicemail, no call-back queue, no waiting until Monday.
What we know about University Park gates comes from actual service calls in University Park. The shaded lots along Southwestern Boulevard, the zero-lot-line driveways near Daniel and Armstrong, the older steel gates on Shenandoah and Byron: each one fails in predictable ways tied to this city’s tree cover, soil, and lot layout. We’re not a generalist contractor squeezing gate work between fence jobs. We repair gates and motor systems exclusively, across nine brands, and every repair carries a written guarantee good for a full year.
Key takeaways:
- Most gate repairs in University Park are completed same-day; hinge-post replacements may run into a second day if new concrete footings must cure.
- Every job gets a written price before work starts. The number on that paper is the number you pay.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators.
- The 365-Day Done Right Promise covers every repair for a full year from the date of service. If it fails inside that window, the second visit is free.
Why Carver Gate Repair Is University Park’s Preferred Gate Repair Company
University Park homeowners call us for the same reasons they stopped calling the other guys. We show up on time, in uniform, with a background check on file. The price is written before anything is opened, and it doesn’t move at the door. When a gate fails, it’s a security problem and a daily inconvenience; the last thing anyone needs is a technician who treats the driveway like a side stop between two fence quotes.
Our crews know the specific failure modes on Park Cities lots. We see hinge-post rot from decades of sprinkler overspray, sagging swing gates where expansive clay has shifted the pier, and photo-eyes caked with oak and acorn litter from mature trees along Preston and Turtle Creek. That local knowledge means we arrive with the right diagnosis already half-formed. It also means fewer return trips.
Response time to University Park is consistently under two hours for repair calls, and often sooner for streets around Snider Plaza and the SMU corridor. Emergency service is available around the clock, weekends and holidays included. Lonnie Burke leads our repair crews, and the standard he enforces is simple: written prices, clean work sites, gates that cycle properly when we drive away.
Driveway Gate Repair in University Park
Driveway gate repair in University Park covers a range of failures: a swing gate that drags, a slide gate that binds halfway, an operator that hums but won’t move the leaf, a keypad or remote that stopped responding. The repair starts with finding the actual fault, not selling a part. On an older University Park estate, that fault is frequently mechanical wear and alignment shift, not a burned-out motor.
Expect $220 – $650 for most driveway gate repairs here. That includes diagnostic time, parts, and labor. A full gate operator replacement, when one is beyond saving, runs $700 – $1,400 installed depending on brand and gate weight.
Swing Gate Repairs
We pull sagging swing gates back into plane, replace worn hinge bearings, and correct post lean from clay soil movement. If the post footing itself has cracked or heaved, we drill new footings and set the post properly, then re-hang the leaf. This is the most common repair on Byron Avenue and Shenandoah Street, where mature trees and freeze-thaw cycles do steady work on the ground under the posts.
Slide Gate Repairs
Slide gates on University Park properties tend to bind when debris collects in the track or when the guide post shifts. We clear the track, inspect the rollers and rack, and realign the gate so the motor isn’t fighting friction. A loop detector that keeps triggering from wet leaves or acorn buildup is a separate fix, and one we see often on shaded driveways.
Gate Welding in University Park
Gate welding in University Park is the fix when the gate structure itself has failed: a cracked stile, a broken hinge mount, a sagging frame that no amount of hardware adjustment will correct. Because many University Park gates are custom steel built decades ago, welding is often the only repair that makes structural sense. A replacement panel is more expensive and rarely matches the existing fence line.
Welding repairs typically run $180 – $550 for on-site frame work, grinding, and rust treatment. The work happens at your driveway; we don’t tow a gate back to a shop unless the damage requires shop jigs or a full frame rebuild. Every weld gets wire-brushed, primed, and painted to slow the rust that University Park’s oak shade and irrigation patterns encourage.
Cracked Frame Welding
The first check is whether the crack is the only problem. A frame cracked through a corner weld tells us to look at the hinge post too, because the crack usually started as stress from a post that moved. We weld the frame, reinforce the corner with a gusset where the design allows, and correct the post so the repair lasts.
Rust Repair and Reinforcement
We cut out rusted sections of tubing and weld in fresh steel where the corrosion has gone beyond surface scaling. On older gates near sprinkler heads or under dense canopy, this buys years of service instead of a full replacement. Rust repair in University Park is steady work; the combination of humidity, irrigation patterns, and tree litter keeps us busy with it.
Trusted Brands We Service in University Park
University Park gates run on a mix of operators, from older LiftMaster swing arms on Byron and Shenandoah to Linear and DoorKing slide operators on newer construction and infill lots. We keep common parts for those brands on our trucks, along with FAAC and BFT components, so a same-day repair doesn’t stall waiting on a parts run. We also work on Viking and Ghost Controls systems, and we diagnose and repair them the same way regardless of brand: find the fault, quote the fix, get it running. Parts arrive faster for University Park customers because our Dallas-Fort Worth parts inventory is minutes away, not a distribution-center shipment away.
Common Gate Repair Problems We See in University Park Homes
- Sagging swing gates from post movement. The expansive clay under University Park driveways swells with rain and shrinks in drought. When the footing moves, the post leans, and the gate leaf drops. The fix is a new footing and post reset, not shims and hope.
- Photo-eye and loop detector false triggers. Acorn and leaf litter in shaded driveways along Southwestern and University Boulevard trips safety beams and loop detectors. The gate reverses mid-cycle or won’t close at all. We clean and shield the sensor, then test the reversal force.
- Slide gate binding from debris and roller wear. Organic matter packed into the track plus worn rollers makes the motor strain and eventually trip its limit. We clear the track, replace the rollers, and reset the travel limits.
- Operator failure from undersized or corroded footings. On zero-lot-line lots, the operator is often mounted on a short custom post or inside the garage. When that post shifts or the mounting surface rots, the drive chain loses tension and the gate hunts. We re-set the mount, tension the drive, and test the full open/close cycle.
Pricing for Gate Repair in University Park, TX
Gate repair pricing in University Park is set by the job, not by what we think the house is worth. A stuck limit switch runs $120 – $200. A hinge-bearing replacement or post realignment runs $250 – $600. A gate motor replacement, when the operator is beyond repair, runs $700 – $1,400 installed for most residential systems. Full gate installation on a new or replacement driveway gate runs $3,800 – $12,000 depending on gate size, material, operator, and whether a power run and safety edges are included. Every quote is written before work starts. If we find something else while the gate is open, we stop, explain it, and get agreement on the new number before we keep going.
Estimates are free. Call (469) 530-2485 and we’ll give you a real dollar range over the phone before we even come out.
We Also Serve Cities Near University Park
Our crews serve University Park and the surrounding North Texas cities, including University Park proper, as well as Dallas, Fort Worth, Houston, and San Antonio. If your property is on the edge of University Park or in a neighboring city, our Gate Repair team can still help. We dispatch from the Dallas-Fort Worth office, so a University Park call is a local call for us.
Serving University Park, TX – Our Local Coverage Area
We’re based in the University Park area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in University Park
In University Park, the usual culprit is the safety sensor or loop detector, not the operator. Oak leaves, acorns, and dust from shaded driveways settle on the photo-eye lens or sit in the loop field, and the gate reverses because the safety system thinks something is in the path. We clean and shield the sensors first, then test reversal force and limit settings on the operator to rule it out. Call (469) 530-2485 and we’ll diagnose it on site, usually same day.
If the hinge post is rotted or leaning from clay-soil movement, the repair takes about 4 to 6 hours of work, but the concrete needs 24 hours to cure before we re-hang the gate and put full load on it. That means the job typically runs across two days: day one for demolition and new footings, day two for reinstallation, alignment, and safety testing. We quote that schedule before starting.
Yes. We service LiftMaster and FAAC operators across University Park, along with BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. If your operator is one of the older LiftMaster swing-arm units common on Byron Avenue and Shenandoah Street, we likely have the limit switch, capacitor, or drive gear on the truck. Call (469) 530-2485 for a free estimate.
A proper gate installation in University Park includes a concrete footer poured to frost line for the pivot or support post, a dedicated electrical run from the panel with its own circuit, safety edges and photo-eye sensors wired and tested, and full reversal-force calibration. A cheap install mounts the operator on an existing weak post, pulls power from the closest outlet, and calls the job done. We don’t build gates that lean in a year. Estimates for full installations are free and always in writing.
Yes. We weld cracked gate frames on-site in University Park, including corner joints and hinge mounts on custom steel gates. The work runs $180 – $550 for a typical frame repair, and we wire-brush, prime, and paint every weld before we leave. If the frame crack came from a shifted post, we fix the post in the same visit so you’re not welding the same crack again in a year.
If your gate is down, dragging, or refusing to close, call (469) 530-2485. A live person answers, the estimate is free, and the price is in writing before we touch anything.
Written by Lonnie Burke, Owner at Carver Gate Repair, operating to The Garrison Standard in University Park.