Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Yonkers
Most gate failures in Yonkers aren’t the panel. They’re the post, the footing, or the operator fighting a sloped driveway. We get called after another company patched the metal and the gate sagged again three months later. The soil here moves, the salt eats hardware, and a gate on a terraced lot works harder than the same gate on a flat Bronx street. If your gate won’t open, won’t stay closed, or reverses mid-travel, call us at (469) 530-2485. We’re a dedicated Gate Repair company working exclusively on gates and motor systems, serving Yonkers with written prices and a full-year guarantee.
Why Carver Gate Repair Is Yonkers’s Preferred Gate Repair Company
Carver Gate Repair operates under The Garrison Standard, which has been in place since 2008. That means three things on every Yonkers job: a written price delivered before any work starts, background-checked and uniformed technicians, and a written guarantee on every repair, good for a full year. The number on the quote is the number on the invoice. If a repair fails inside the guarantee window, we come back at no charge.
Our technicians work on nine gate motor brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and are backed by our Yonkers Gate Motor Repair expertise. The right parts and know-how get matched to the system already installed on your property, not whatever’s on the truck. Dispatch and scheduling are coordinated from the brand’s New York City office, with crews serving Yonkers locally. Phones are answered by a live person 24 hours a day, every day of the year. No voicemail boxes. No waiting until Monday.
Lonnie Burke leads the Yonkers crew. The first thing our techs do on a slope job is check the hinge post and footing, because that’s where Yonkers gates actually fail. The second thing they do is quote the fix in writing and explain exactly what they’ll do before turning a wrench.
Metal Gate Repair in Yonkers
Metal gate repair in Yonkers usually means fixing sag, seized hinges, rusted welds, or a panel that no longer aligns with the latch post. The steel and wrought iron gates common in this city take a beating from road salt and wet winters. The panel may be fine; the connection points give out first. We repair the hinge, the post, the weld, and the alignment as one job, not as separate trips.
Expect to pay between $280 and $650 for most metal gate repairs in Yonkers, depending on whether a post needs re-plumbing or a weld needs cutting and re-doing. A full post replacement with a new concrete footing on a sloped driveway runs $700 to $1,400. The quote is written before we start.
Hinge and Post Repair
When a metal gate drags on the latch side, the hinge post has usually moved. We cut the old hinge, re-plumb or replace the post, re-hang the gate, and set the reveal so it clears the ground on the high side of the driveway. On Yonkers’s retaining-wall footings, we anchor the post into fresh concrete and let it cure before re-hanging weight on it.
Patching the panel without fixing the post means paying twice. We tell you that before you spend a dollar.
Weld and Rust Repair
Road salt from Bronx River Parkway and Saw Mill River Parkway sits in the bottom rail and eats the welds from inside. We grind out the compromised metal, re-weld with a continuous bead, and treat the area with rust-inhibiting primer. If the bottom rail is rotted through, we replace the section rather than weld over rust. That repair runs $200 to $500 depending on how much rail has to come out.
Wood Gate Repair in Yonkers
Wood gate repair in Yonkers means a different failure pattern. The cedar and pressure-treated gates common in the more tree-lined streets of Northwest Yonkers and Edgemont swell in wet weather and shrink in dry spells. The gate’s momentum changes with the seasons. Hinges pull out of end grain. The frame twists. The latch misses the strike by half an inch.
Most wood gate repairs in Yonkers run $180 to $420. We replace rot-split stiles, re-lag hinges into new wood with galvanized hardware, straighten a warped panel, and reset the latch so it dead-latches in both wet and dry weather. If the gate is too far gone, we’ll tell you honestly and quote a replacement instead of patching something that’ll split again by fall.
Realignment and Hardware Replacement
A wood gate that rubs the ground or won’t latch is usually a hinge problem, not a panel problem. We pull the gate, plug and re-drill the hinge mortises, and re-hang it square to the post. Galvanized hardware throughout, because zinc-plated hinges rust through in one Yonkers winter. Cost: $150 to $300 on most gates.
Post Replacement on Sloped Lots
A leaning wood post on a sloped Yonkers lot usually means the footing was undersized from the start. The post wiggles, the gate sags, the latch stops catching. We dig out the old footing, set a new pressure-treated post in concrete, and brace it square while it cures. That’s $350 to $700. We schedule the return trip to re-hang the gate after the concrete has reached strength. No point bolting hinges to a post that’s still moving.
Trusted Brands We Service in Yonkers
We carry repair parts and replacement boards for Viking, Ghost Controls, DoorKing, and Elite operators, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. That means shorter turnaround for Yonkers customers with a controller board or limit switch that needs replacing. When a DoorKing swing arm fails on a hill, or a Ghost Controls solar panel stops holding charge, the fix is diagnosed the same day and quoted in writing. Our techs are trained on the specific electronics, torque settings, and control logic of each brand, so a Yonkers gate doesn’t get a universal-parts patch job.
Common Gate Repair Problems We See in Yonkers Homes
- Sagging swing gates on sloped driveways. The hinge post loses its footing, and the gate drops. Patching the panel without re-setting the post means the same failure comes back in months. The post and footing are the repair.
- Operator arms binding on settled concrete. The apron slopes or the retaining wall footing settles, the drive track or piston binds, and the overload trips. The gate reverses constantly. The fix is re-shimming the operator, re-anchoring it to a fresh footing, and resetting the limit and reversal points.
- Safety sensors knocked out by winter. Snow-plow spray, road salt, and shifting ground misalign photocells and edge sensors. A gate running without working entrapment protection is dangerous. We test every repair to UL 325 standards before we leave the driveway.
- Lock and latch failure on old iron gates. The lock cylinder seizes from moisture and salt, or the recoil spring snaps. We replace the lock, re-set the strike, and test it through a full open-close cycle.
Pricing for Gate Repair in Yonkers, NY
Most Yonkers gate repairs land between $180 and $1,400. A hinge or latch repair is at the low end, $150 to $300. Realignment runs $150 to $400. A full operator replacement with a new swing arm on a sloped driveway typically lands $900 to $2,200, parts and labor included. Where you fall depends on whether the post and footing need to be re-done, how warped the panel is, and which brand of operator is on the gate. The main costs are structural. That’s the honest answer.
Quotes are free. The price we write is the price you pay. Nothing moves at the door, and we don’t start until you’ve approved the number. Call (469) 530-2485 to book a service visit.
We Also Serve Cities Near Yonkers
Our crews cover the full gate-repair territory around Yonkers, including Mount Vernon, New Rochelle, White Plains, and the Bronx. The same written pricing, the same one-year guarantee, the same live phone line. If you’re just over the line and need Gate Repair, we’ll send the same background-checked tech crew that works Yonkers daily.
Serving Yonkers, NY – Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Yonkers
Often, yes. On many Yonkers driveways the real failure is a hinge post that has been working loose in an undersized or cracked footing, not the gate panel itself. If the post moves when the gate swings, a new footing is the repair. That runs $350 to $700 on most sloped lots. Call (469) 530-2485 and we’ll confirm the condition on-site.
In most cases, yes. The usual failure is condensation inside the control panel, a corroded limit switch, or a misaligned safety sensor from shifting ground and salt spray. We replace or recalibrate those components rather than selling a whole new operator. If the board itself is fried, we quote a replacement from the correct brand. Estimates are free; call (469) 530-2485.
Yes. We wire keypads, exit loops, intercoms, and phone-app receivers to existing gate operators from all nine brands we service. The gate’s motor and safety circuits stay intact; we integrate the access control to trip the operator through the correct input. A typical keypad or loop install on a Yonkers gate runs $300 to $700. Call (469) 530-2485 for a written quote.
It can work on the south-facing lots around Palisade Avenue and the hillside streets of Park Hill, where the gate gets decent sun. But a shaded gate on a steep tree-lined lot will drain the battery in the winter. We’ll check the site’s sun exposure before recommending solar versus running a proper power line to the operator. Either way, the price is quoted in writing first.
A proper installation includes the post footings sized to the gate weight and the slope of the ground, the operator anchored to a stable base on a level pad, the power run to the motor, safety edges and photocells wired and tested, and reversal testing done to UL 325 entrapment standards. That’s not an upgrade; it’s the job. Installation is scheduled and measured, never same-day. Call (469) 530-2485 for a free measure and a written install price.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Yonkers with written prices and a one-year guarantee on every repair.