Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Grand Prairie, TX
Gate repair in Grand Prairie means working on properties shaped by North Texas clay soil, hard summer heat, and some of the fastest residential growth in the metroplex. We’re Carver Gate Repair, and we work exclusively on gates and gate motors across Grand Prairie, from solid iron driveway gates to the lighter tube-steel pedestrian gates common in newer subdivisions. Our crews arrive with a written price in hand before any work starts, and every repair carries a written guarantee good for a full year. If you need a gate fixed today, call (469) 530-2485 and a live person answers around the clock.
Why Grand Prairie Homes Are Different
Grand Prairie sits on expansive clay soil that shifts with every wet-dry cycle North Texas throws at it. Gate posts that were plumb five years ago drift out of alignment as the ground underneath them moves, and that drift is the root cause behind a lot of what we see: gates that drag, latches that no longer line up, and motors that strain against a gate that doesn’t swing true anymore. Homes in established neighborhoods like Trailwood, Westchester, and the Lake Ridge area tend to have heavier ornamental iron gates on brick columns, while developments north of I-20 and around Joe Pool Lake lean toward automated tube-steel driveway gates and vinyl privacy gates. Wind exposure near the lake matters too – a wide solid gate catches a lot of wind, and that force ends up in the hinges and the operator. Every one of those factors changes how we approach a repair, and it’s why a generic gate patch job rarely holds up here.
Our Main Grand Prairie Services
The two calls we field most from Grand Prairie homeowners are gates that won’t open or close properly and motors that run but don’t move the gate. Each service has its own page with pricing and scheduling details.
Gate Repair in Grand Prairie
A gate repair in Grand Prairie usually starts with the symptom: a gate dragging on the driveway, a latch that won’t catch, a sag that gets worse every month. Clay soil movement is behind a large share of these failures. We inspect the posts, hinges, weld points, and the gate’s alignment before giving you a written price, and the repair is quoted and agreed to before we touch a tool. Learn more on our Gate Repair in Grand Prairie page.
Gate Installation in Grand Prairie
New gate installations in Grand Prairie have to stand up to wind, soil movement, and the summer heat that bakes everything metal. We measure, build, and set gates the way the ground here demands – deeper posts than you’d get away with in other parts of Texas, proper bracing, and hinges sized for the weight. If you’re planning a new driveway or pedestrian gate, the full process is on our Gate Installation in Grand Prairie page.
Gate Motor Repair in Grand Prairie
Motors fail in predictable ways in Grand Prairie: capacitors cook in the August heat, limit switches drift, and loop detectors stop picking up vehicles after a few hard summers. We diagnose the exact failure rather than replacing parts on guesses, and we work on motors from Viking, Ghost Controls, DoorKing, and Elite, among others. See the full breakdown at Gate Motor Repair in Grand Prairie.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Grand Prairie
We stock common repair parts for Viking, Ghost Controls, DoorKing, and Elite motors in our local inventory, which means many Grand Prairie motor repairs go same-week rather than waiting on a distributor. Every technician assigned to a Grand Prairie job is trained on the specific equipment at that address. See the full list on our brands page.
Pricing for Gate Company in Grand Prairie, TX
| Service | Typical range in Grand Prairie |
|---|---|
| Gate repair service call | $75 – $125 |
| Hinge replacement or repair | $160 – $390 |
| Gate post repair or reset | $300 – $825 |
| Gate wheel or roller replacement | $140 – $260 |
| Gate opener motor replacement | $450 – $1,400 |
| Circuit board diagnosis and replacement | $250 – $650 |
| Loop detector replacement | $280 – $560 |
| Limit switch adjustment or replacement | $160 – $320 |
| Full driveway gate installation | $2,600 – $8,500 |
| Pedestrian gate installation | $750 – $2,200 |
What pushes a Grand Prairie job toward the top of those ranges is usually post damage from soil shift or a gate that’s been run out of alignment long enough to stress the motor and hinges together. Whatever the final number is, it’s given to you in writing before any work begins, and the number does not move at the door. No moving prices, no surprises at invoice time.
Neighborhoods We Serve in Grand Prairie
We run calls across the whole city, from older subdivisions near Main Street and the airfield to the newer homes going up north of I-20. Response time for most Grand Prairie repairs is same-day or next-day, depending on the call volume that morning.
- Trailwood
- Westchester
- Lake Ridge
- Mira Lagos
- Indian Hills
Service Area – Cities Near Grand Prairie
Our Grand Prairie crews regularly take calls in the surrounding Tarrant County and southwest Dallas County areas. If you’re just outside the city line, we can help in Euless, TX, Duncanville, TX, Bedford, TX, and Hurst, TX.
Serving Grand Prairie, TX – Our Local Coverage Area
We’re based in the Grand Prairie area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Grand Prairie
Most Grand Prairie repair calls are same-day or next-day. We dispatch from our Dallas-Fort Worth coordination office straight to your address, and the phone is staffed by a live person 24 hours a day, every day. Call (469) 530-2485 to see today’s schedule and get a straight answer on when we can be there.
Many Grand Prairie HOAs have specific rules about gate height, material, and color for front-facing gates, so we recommend checking your HOA covenants before a new install. For repairs to an existing gate, a permit is typically not required. We’ll flag anything that needs HOA sign-off during your estimate.
Every repair we do in Grand Prairie carries the 365-Day Done Right Promise: a written guarantee covering the full year from the date of service. If the repair fails in that window, our second visit is free, no charge, no argument. That guarantee is in writing on every job we do.
Call (469) 530-2485 for a free estimate on any gate or gate motor work in Grand Prairie. A live person answers, a written price comes before any work starts, and the repair is guaranteed in writing for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grand Prairie Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.