Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Half Moon Bay, CA
Gate work in Half Moon Bay runs into two conditions most other Bay Area towns don’t deal with: salt air and soft coastal soil. A gate that works fine in Belmont can bind, sag, or corrode here within a season or two. Carver Gate Repair handles the full scope of gate work in Half Moon Bay, from hinge and weld repairs to complete automated systems, with written pricing before any work starts and a 365-day guarantee on every repair. If a gate won’t open or a motor is grinding, call (469) 530-2485 and a live person picks up.
Why Half Moon Bay Homes Are Different
Half Moon Bay’s position directly on the Pacific means every gate component gets hit by salt-laden wind and fog. Powder-coated steel and standard zinc hardware degrade faster here than they do anywhere inland. We routinely open panels shielded from view and find hinge welds and post bases that look ten years older than the gate itself. That’s why we recommend marine-grade stainless hardware and corrosion-resistant coatings on any job within a mile of the coast, including Miramar, Princeton, and the streets west of Highway 1 near Dunes Beach.
The housing stock adds another layer. Half Moon Bay mixes 1960s and 1970s ranches along Frenchmans Creek and Alsace Lorraine with newer, larger custom properties in the hills above town. Older gates sit on posts set in soil that shifts with winter rain, which is why a gate that swung freely in August can start dragging its latch by February. Newer automated gates, especially the custom steel and wood styles common in Ocean Colony, often use operators that were oversized for the gate’s actual weight, which burns motors out early. Coastal grading also means many driveways slope toward the house, so a gate’s bottom hinge carries more load than the manufacturer intended. None of this is generic California gate work.
Our Main Half Moon Bay Services
Two calls dominate our Half Moon Bay schedule: gates that won’t open or close, and existing gates being replaced or automated for the first time. Here is how we handle each one.
Gate Repair in Half Moon Bay
Most repair calls in Half Moon Bay start with a gate that has dropped on its hinges, a latch that no longer catches, or a wheel that has dug a rut into a gravel driveway. Salt corrosion on exposed hardware and shifting post footings are the usual causes. We arrive with steel stock, new hinges, and replacement hardware on the truck, quote a written price, and do the work the same visit. Learn more about our approach on our Gate Repair in Half Moon Bay page.
Gate Installation in Half Moon Bay
New gates in Half Moon Bay have to be overbuilt for wind and salt. We set posts in concrete to a depth matched to the gate’s weight, and we use stainless hardware as standard within sight of the ocean. Whether it’s a wood driveway gate on a home near Main Street or a steel estate gate in Ocean Colony, every installation starts with a measured site visit and a written price. See our Gate Installation in Half Moon Bay page for more.
Gate Motor Repair in Half Moon Bay
Coastal fog and salt are hard on circuit boards, limit switches, and wiring. We diagnose motor failures rather than guessing at the problem, and we stock parts for the systems Half Moon Bay homes actually use, from Viking and DoorKing to Ghost Controls and Elite. If the operator can be repaired, we repair it. If not, we quote a replacement that fits the existing gate layout. See our Gate Motor Repair in Half Moon Bay page for details.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Half Moon Bay
Our technicians work on gate motors from our brands including Viking, Ghost Controls, and DoorKing. We keep common boards, limit switches, and remotes in local stock so a repair in Half Moon Bay often finishes same-day rather than waiting on a parts shipment.
Pricing for Gate Company in Half Moon Bay, CA
| Service | Typical range in Half Moon Bay |
|---|---|
| Gate repair, minor (hinges, latch, alignment) | $150 – $400 |
| Gate repair, major (weld, structural, post reset) | $400 – $1,200 |
| Chain-link gate repair | $180 – $600 |
| Automatic gate motor repair | $250 – $650 |
| Gate motor replacement | $650 – $1,800 |
| Weld / broken joint repair | $150 – $450 |
| Gate opener installation | $900 – $2,200 |
| Driveway gate installation (single swing or slide) | $2,500 – $7,500 |
| Pedestrian gate installation | $800 – $3,000 |
| New gate opener unit only | $450 – $1,300 |
In Half Moon Bay, coastal exposure pushes material costs slightly higher because we spec stainless hardware and marine-grade coatings that inland jobs don’t require. The other driver is access: properties in the hills or on long gravel driveways take longer to reach with equipment. Whatever the figure, you get a written price before any work begins, and that number is the number, agreed in advance, not a starting point.
Neighborhoods We Serve in Half Moon Bay
We work across the entire Half Moon Bay area, from the flat coastal streets to the hillside lots east of Highway 1. Response time in the city is typically same-day for repairs and within a few days for measured installation work.
- Ocean Colony
- Frenchmans Creek
- Miramar
- Princeton
- Alsace Lorraine
Service Area – Cities Near Half Moon Bay
Beyond Half Moon Bay, our crews also cover the surrounding coastside and mid-peninsula communities. We handle gate work in El Granada, CA, Burlingame, CA, Millbrae, CA, and Belmont, CA. Scheduling is coordinated from our San Francisco Bay Area office, with crews dispatched locally to each area.
Serving Half Moon Bay, CA – Our Local Coverage Area
We’re based in the Half Moon Bay area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Half Moon Bay
Repair calls in Half Moon Bay are typically scheduled same-day or next morning. Motor failures and gates that won’t secure are prioritized. Installation and new automation work is scheduled for a measured site visit first, then a written quote.
Most repairs do not require a permit. New gate installations or automation can trigger HOA review, especially in communities like Ocean Colony. We can provide the specifications and drawings your HOA or the city asks for. Confirm with your association before scheduling installation.
Every repair carries our 365-Day Done Right Promise in writing. If the repair fails within one year, we return and fix it at no charge. The guarantee is a line item on your invoice, not a verbal assurance.
Yes. Coastal exposure changes the hardware we recommend, not our ability to do the work. We use stainless and marine-grade components on ocean-adjacent properties to resist the corrosion that standard parts can’t handle. Your written quote will specify those materials.
Estimates are free. For repairs, the estimate is the written price we hand you before any work starts. For installations and motor replacements, we schedule a site visit, measure the gate and site, and deliver a written quote. Call (469) 530-2485 to book one.
If you need gate work in Half Moon Bay, call (469) 530-2485. A live person answers, we schedule a time that works, and you get a written price before anything is touched. Led by Lonnie Burke, our crew shows up background-checked, uniformed, and ready to fix the gate right the first time.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Half Moon Bay Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.