Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Leander, TX
Gate repair in Leander typically runs between $150 and $850 depending on what failed, and most jobs are finished in one visit because our trucks carry parts for nine major gate-motor brands. Leander’s mix of newer master-planned subdivisions and older acreage properties on the city’s west side means we see everything from basic steel tube gates to heavy ornamental iron gates with automated openers. If your gate won’t open, sags, or stopped responding to the remote, call (469) 530-2485 and a real person answers, day or night.
Why Leander Homes Are Different
Leander’s growth pattern shapes the gate work we do. Homes in communities like Crystal Falls, Travisso, and Summerlyn tend to be newer, with gates installed during the original build. Many of those gates use entry-level swing operators that start acting up around the five-to-seven-year mark, especially after a few Leander summers. High heat and direct sun age circuit boards, brittle limit switches, and plastic gears faster than the installer’s manual would suggest.
On the west side, where lots are larger and often outside an HOA, gates are more likely to be ranch-style or custom-built. These are heavier, sometimes mounted on stone columns or steel posts set into thin limestone soil, and they put real strain on operators sized for lighter work. Some Leander HOAs require approval before a gate’s style or color changes, particularly in gated sections of Travisso and Bluffs at Crystal Falls. If a permit or HOA sign-off is needed, we’ll tell you before the first tool comes off the truck.
Our Main Leander Services
Most Leander homeowners call us for one of three reasons: a gate that won’t open or close, a gate they need installed or replaced, or a motor that hums but won’t move the gate. Each service has its own page with local pricing and what to expect.
Gate Repair in Leander
Repair work in Leander often comes down to a few familiar problems: sagging gates on sloping driveways, hinges worn from wind load, or openers fighting a gate that was never hung level. We diagnose the gate and the operator together, because fixing one while ignoring the other is how callbacks happen. Our technicians carry steel stock, hinges, rollers, and operator parts on the truck, so most repairs are done same-day. Gate Repair in Leander covers typical costs, warning signs, and what a repair visit actually involves.
Gate Installation in Leander
New gate installations in Leander have to contend with thin topsoil over limestone on many lots, which affects how posts are set and how long they’ll stay true. We square the posts, size the hinges to the gate’s actual weight, and match the operator to how the gate will be used – not to the cheapest option on the shelf. If you’re replacing an old gate or adding one where none existed, Gate Installation in Leander walks through the process, from measure to final adjustment.
Gate Motor Repair in Leander
Leander’s heat is harder on gate motors than almost anything else. Capacitors fail, limit switches drift, and control boards cook inside steel cabinets that sit in full afternoon sun. We repair motors on all nine brands we service, and when a motor is beyond saving, we’ll quote a replacement before any work begins. Gate Motor Repair in Leander explains common motor failures, repair versus replace calls, and what those jobs typically cost here.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Leander
We repair and service Viking, Ghost Controls, DoorKing, and Elite operators, along with five other major brands. Our trucks stock the most common boards, limit switches, remotes, and receivers for these brands, which is why many Leander repairs are completed the same day. See our brands page for the full list of equipment we support.
Pricing for Gate Company in Leander, TX
| Service | Typical range in Leander |
|---|---|
| Gate repair, minor (hinge tightening, roller replacement, latch adjustment) | $150 – $300 |
| Gate repair, moderate (sagging gate, reinforce post, replace roller or hinge) | $300 – $500 |
| Gate repair, major (rehang gate, replace structural post) | $500 – $850 |
| Electric gate opener service call | $125 – $200 |
| Swing gate motor replacement | $550 – $1,250 |
| Sliding gate motor replacement | $650 – $1,450 |
| Solar gate opener installation | $1,100 – $2,200 |
| Gate lock or latch replacement | $150 – $400 |
| Gate remote/keypad programming or replacement | $100 – $250 |
| Single gate installation (standard tube steel) | $950 – $1,700 |
| Double gate installation (standard tube steel) | $1,500 – $2,600 |
Prices in Leander land at the higher end of these ranges when gates are heavy ornamental iron, when the operator is mounted on a stone column that must be worked around, or when long runs of low-voltage wire have been chewed through by the city’s healthy rodent population. Whatever the job, you’ll have a written price before any work starts, and the number in that quote is the number you pay.
Neighborhoods We Serve in Leander
We cover the full Leander area, from the master-planned communities along 183A to the acreage lots west of Bagdad Road. Our technicians know the gate hardware common to each part of town and arrive with parts already stocked for the job described.
- Crystal Falls
- Travisso
- Summerlyn
- Bluffs at Crystal Falls
- Deerbrooke
Most Leander addresses are reached within a few hours of a call, and same-day service is available for gate repair and motor failures. Emergency calls are answered by a live person at any hour.
Service Area – Cities Near Leander
Our Leander crews also serve the communities around us, so if you’re just outside the city line, call and we’ll tell you straight up whether we can get to you and when. We regularly work in Cedar Park, TX, Liberty Hill, TX, Georgetown, TX, and Round Rock, TX.
Serving Leander, TX – Our Local Coverage Area
We’re based in the Leander area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Leander
Gate repair and motor failure calls in Leander are usually reached same-day, with many jobs completed on the first visit. Installations and new gate orders are scheduled, not rushed; we’ll give you a firm date and a written price before any work begins.
Some do, particularly in gated sections of communities like Travisso and Bluffs at Crystal Falls. We’ll identify whether HOA or city approval is needed during the estimate, and we’ll hold the job until sign-off is in hand. You won’t be left fixing a compliance problem after the fact.
Yes. Every job receives a written price before any work begins, and that number does not change at the door. If a repair fails within a year, we return and fix it at no charge under the 365-Day Done Right Promise. Call (469) 530-2485 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Leander Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.