Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Mentone, CA
Carver Gate Repair is a gate company serving Mentone, CA with repair, installation, and motor work on residential and light-commercial systems. Mentone sits in the San Bernardino Valley against the foothills, so gates here contend with dry heat, fine dust, and older ranch-style properties that often still have their original swing operators. We carry parts for nine major motor brands and put every price in writing before the first tool comes off the truck. Call (469) 530-2485 for a free estimate.
Why Mentone Homes Are Different
Mentone’s housing stock skews older than the new tracts going up in neighboring Highland and Redlands. A lot of what we see on the east end of town is 1960s and 1970s construction, with long driveways off Mentone Boulevard and the side streets that run toward Crafton Hills. Those properties were often built with chain-link on pipe posts, and the posts have settled over fifty years of valley heat. The gate sags. The latch no longer lines up. A repair that ignores the post itself won’t hold.
The other factor is wind. When the Santa Anas push through the pass, a swing gate becomes a sail. We regularly see bent hinge brackets and stripped rack teeth on gates off Wabash and Garnet after a hard wind event. Dust is a quieter problem. Fine grit works into limit switches and gear boxes, and a motor that was installed five years ago without regular cleaning will start binding in the summer. Mentone also has a mix of HOA and non-HOA neighborhoods, so some jobs need board approval before a gate style changes and others don’t. We flag that early so a project doesn’t stall at the permit counter.
Our Main Mentone Services
Most Mentone calls start with one of two situations: a gate that won’t open or a property with no gate at all. Below are the three services we run in Mentone, each with its own page covering the local details, pricing, and timeline.
Gate Repair in Mentone
A gate that won’t close in Mentone is a security problem, not just a nuisance. We rebuild sagging frames, replace the hinges, repair or replace fence-line hardware, and get the gate square so the operator doesn’t fight itself. On older Mentone properties we often find the gate leaf was hinged on posts set in dry, shifting soil, which is the root cause of the sag. We fix the mechanism and the alignment together, because one without the other means you’ll be calling again next season. Every repair gets a written guarantee good for a full year. Learn more on our Gate Repair in Mentone page.
Gate Installation in Mentone
New gate work in Mentone means matching the gate to the driveway grade, the setback, and in HOA-governed neighborhoods, the design review rules. We handle the layout, concrete work for the posts, the gate itself, and the operator. Most Mentone installations are swing gates on residential lots, though we do run slide gates for wider driveways on acreage heading toward the foothills. We quote a fixed written price up front, with no change order surprises. See the full breakdown on our Gate Installation in Mentone page.
Gate Motor Repair in Mentone
When the motor quits, the gate usually fails in the worst position: stuck open at 6 a.m. or closed with a car on the wrong side. We troubleshoot the board, limit switches, loop detectors, and gears on motors from Viking, Ghost Controls, DoorKing, and Elite, among others. In Mentone the most common motor failure we diagnose is a limit switch that has seized with dust or a gear that stripped when the gate was forced by hand. Same-day diagnosis is typical for repair calls. Details at Gate Motor Repair in Mentone.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Mentone
We work on Viking, Ghost Controls, DoorKing, and Elite equipment, plus five other major motor brands. Common parts for these systems are stocked on the truck or available same day from our Inland Empire supply chain. See our brands page for the full list and what each requires for maintenance.
Pricing for Gate Company in Mentone, CA
| Service | Typical range in Mentone |
|---|---|
| Gate repair service call and diagnosis | $75 – $150 |
| Gate hinge replacement | $120 – $250 |
| Gate frame weld or brace repair | $180 – $400 |
| Gate operator limit switch replacement | $160 – $340 |
| Gate motor gear replacement | $220 – $450 |
| Loop detector replacement | $200 – $420 |
| Standard swing gate installation | $2,800 – $5,500 |
| Slide gate installation | $3,600 – $7,200 |
| Gate motor replacement | $650 – $1,700 |
| Keypad or intercom addition | $280 – $650 |
| Complete gate and motor package | $3,400 – $8,500 |
Prices in Mentone are shaped by the same things everywhere in the Inland Empire: the length of the gate, whether it swings or slides, and how much concrete work the posts require. What doesn’t move is the number we quote. Every job gets a written price before work begins, and that’s the price you pay.
Neighborhoods We Serve in Mentone
We cover all of Mentone, from the residential streets off Mentone Boulevard to the larger lots along Crafton and the foothill roads. Most repair calls get a same-day or next-day visit. These are a few of the areas we work in regularly:
- Mentone Boulevard corridor
- Wabash Avenue area
- Garnet Street area
- Crafton Hills foothill properties
- East Mentone acreage lots
Service Area – Cities Near Mentone
If you’re outside Mentone proper, we also cover the surrounding San Bernardino Valley cities. We serve Redlands, CA, Yucaipa, CA, Highland, CA, and Calimesa, CA, with the same written-pricing policy across the entire service area.
Serving Mentone, CA – Our Local Coverage Area
We’re based in the Mentone area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mentone
For gate repair and gate motor repair, most Mentone calls get a same-day or next-morning visit. If the gate is stuck open or won’t open at all, tell the dispatcher and we’ll prioritize the call. Installation work is scheduled after a free on-site measure.
Some Mentone neighborhoods have HOA design review requirements for a new gate or a visible style change. If you’re unsure, your HOA packet will say. We’ll flag it before ordering material so you don’t pay for a gate that the board rejects. Repairs to an existing gate usually don’t need review.
Small hinge replacements usually land between $120 and $250. Motor or board work runs higher, in the $160 to $450 range depending on the part. The exact number is always quoted on paper before we start, not after. Call (469) 530-2485 and we’ll give you a straight answer over the phone.
Every repair is covered by a written guarantee good for a full year from the date of service. If the same repair fails inside that window, the second visit is free, no charge and no argument. That’s the Garrison Standard, and it applies on every Mentone job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mentone Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.