Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in North Lauderdale, FL
Gate work in North Lauderdale runs into two things other Florida cities don’t deal with as much: older swing-gate hardware on 1970s and 80s homes, and salt-heavy air blowing in from the coast that eats untreated steel. Carver Gate Repair handles both, along with newer motorized systems across the city. We’re the gate company North Lauderdale homeowners call when a gate won’t open, a motor hums but won’t move, or a weld gives out. Call (469) 530-2485 and a live person answers, day or night.
Why North Lauderdale Homes Are Different
North Lauderdale’s housing stock skews toward single-family homes built between the 1960s and early 1990s, which means a lot of the gate hardware we see was installed decades ago and has been patched rather than replaced. Many properties along SW 81st Avenue and near the Hampton Pines area use swing gates with original steel frames that have rusted through at the hinge welds. That’s a structural issue, not a motor issue, and it changes how we quote the job.
The climate is the other constant. Coastal humidity and salt air corrode gate motors, limit switches, and control boards faster than inland Florida. We see more capacitor failures and seized gearboxes in North Lauderdale than in drier parts of the state, simply because moisture works its way into the housing. We factor that into how we diagnose and what parts we stock. And when a motor fails during a summer downpour, the gate doesn’t wait for a convenient time. That’s why our phones are answered by a person 24 hours a day.
Our Main North Lauderdale Services
Most North Lauderdale calls fall into one of two buckets: a gate that stopped working and needs repair now, or a gate that’s been failing repeatedly and needs a proper fix at the motor level. Here is what that looks like in this city.
Gate Repair in North Lauderdale
A gate dragging on its hinges or sagging at the latch point is the most common North Lauderdale repair we see. Technicians square the frame, re-weld broken hinge points, and replace worn rollers or wheels before they damage the track. On welded steel gates, rust repair gets done the same visit so the gate doesn’t fail again six months later. If your gate binds, grinds, or won’t close flush, we give you a written price before any work starts. Full details on Gate Repair in North Lauderdale.
Gate Installation in North Lauderdale
New gate work in North Lauderdale starts with a site measure and a written proposal. We install steel, aluminum, and ornamental gates sized to your driveway opening, with posts set to handle the weight and wind load this city gets. Swing and slide options are both common here, and we handle the concrete work, the post setting, and the gate hardware in one job. Every quote is fixed before work starts and includes the full-year written guarantee. See what’s involved at Gate Installation in North Lauderdale.
Gate Motor Repair in North Lauderdale
When the gate itself is fine but the motor won’t engage, the problem is usually in the operator, the control board, or the limit switch. North Lauderdale humidity accelerates all three. We diagnose the exact component, show you the worn part, and replace it with one matched to your motor’s brand, not a universal part that sort of fits. If it’s a control board, we check the loop detector and safety edges too, because one failure usually signals another one coming. Details are on Gate Motor Repair in North Lauderdale.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in North Lauderdale
We work on Linear, Viking, Ghost Controls, and DoorKing systems most often in North Lauderdale, carrying common boards, remotes, and safety-edge parts in the truck so repairs don’t stall while parts ship. See the full our brands list for equipment we service.
Pricing for Gate Company in North Lauderdale, FL
| Service | Typical range in North Lauderdale |
|---|---|
| Gate motor troubleshooting and repair | $180 – $340 |
| Gate motor replacement | $650 – $1,600 |
| Swing gate operator installation | $850 – $1,600 |
| Slide gate operator installation | $900 – $1,700 |
| Hinge replacement (standard steel swing gate) | $150 – $350 |
| Rust repair and re-weld (per section) | $125 – $400 |
| Control board replacement | $275 – $550 |
| Loop detector installation or replacement | $250 – $450 |
| Gate safety edge replacement | $180 – $320 |
| Remote and receiver programming | $75 – $150 |
Rust repair, welded frames, and motor work done on gates that haven’t been serviced in years push prices toward the upper end in North Lauderdale. Every job gets a written price before any work starts, and that number doesn’t change at the door.
Neighborhoods We Serve in North Lauderdale
We cover all of North Lauderdale, from the older sections around Kimberly Boulevard and Rock Island Road to the communities east of US-441 where HOA gates are common. Our crews typically reach North Lauderdale addresses the same day for repair calls.
- Hampton Pines
- Broadview
- North Lauderdale Estates
- Palm Springs Plaza area
- Silver Lakes
Service Area – Cities Near North Lauderdale
Carver Gate Repair serves North Lauderdale and the surrounding South Florida region with the same written-price standard. Here are nearby city pages: Miami, FL, Jacksonville, FL, Tampa, FL, and Orlando, FL. Dispatch for North Lauderdale is coordinated from our Miami office.
Serving North Lauderdale, FL – Our Local Coverage Area
We’re based in the North Lauderdale area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Lauderdale
Most North Lauderdale repair calls are handled same day or next morning. We dispatch from the South Florida metro area and keep common motor parts and gate hardware stocked locally, so there’s no waiting on a parts shipment for standard repairs. Call (469) 530-2485 and we’ll give you an arrival window before you hang up.
In many North Lauderdale communities along US-441 and in gated neighborhoods, yes. Your HOA may require a specific gate style or finish before you install. We can provide the spec sheet and materials list your HOA asks for, or wait to schedule until your board signs off. We’ll tell you what’s typical for your area when we quote the job.
Yes. We service residential and light-commercial gate systems throughout North Lauderdale, including storefront roll-up gates and community entrance gates. The same written-price policy applies to every job, and every repair carries a full-year written guarantee. Call (469) 530-2485 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Lauderdale Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.