Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Pacific, WA
Gate systems in Pacific, WA fail differently than they do ten miles north in Seattle. The soil here holds water longer through the wet months, the wind comes off the valley in gusts that stress hinges and motor mounts, and most homes sit on lots large enough to make a gate the first thing a visitor touches, not an afterthought. We’re Carver Gate Repair, a gate company that works exclusively on gates and the motors that move them. If your gate is grinding, sagging, or dead at the post, call (469) 530-2485 and a live person answers, day or night.
Why Pacific Homes Are Different
Pacific is a small, flat city between Auburn and Sumner, and the gate issues here follow a pattern. Most properties are single-family homes and mobile or manufactured homes on rectangular lots, which means a lot of driveway gates are driveway gates in the literal sense: wide, on rollers or weld hinges, exposed to the south wind that runs through the valley. Moisture is the biggest variable. Pacific gets the same rain as the rest of King County, but the ground drains slow, so posts set in concrete still shift slightly from year to year. That movement throws off the gap between the gate and the post; eventually a latch stops catching or a motor strains against a misaligned track.
We also see a good share of older chain-link and tube-steel gates on Pacific properties where the original install was done fast. Hinges wear, wheels flat-spot, and the gate starts dragging. It’s not dramatic, it just gets harder to open until somebody calls. Because the city is small, most calls come from the neighborhoods south of Stewart Road and along the valley floor. The work here is rarely about exotic equipment. It’s usually a tired motor, a bent hinge, or a gate that never operated smoothly in the first place.
Our Main Pacific Services
Most Pacific homeowners call us for one of two things: a gate that has stopped working, or a gate they want installed or upgraded. Each of these has its own Pacific page with full detail, pricing, and the specific brands we stock parts for.
Gate Repair in Pacific
Repair work in Pacific usually starts with a sag, a squeal, or a gate that catches on the ground. We show up, find the cause, and put a written price in your hand before any work starts. On older welded gates, the fix is often a new hinge and a re-set post; on roller gates, it’s the wheels and the track. Pacific’s wet winters mean we look hard at corrosion and wood-to-metal contact points, which other crews miss. Full detail is on the Gate Repair in Pacific page, including prices for common repairs.

Gate Installation in Pacific
A new gate on a Pacific property has to hold square through wet winters and gusty afternoons, so we size posts and hinges for the actual gate weight, not a guess. We install driveway and pedestrian gates across the city, matching the style to the house and the hardware to how the gate will be used. Every installation includes a written price, and we quote before we order or build. See the Gate Installation in Pacific page for the full rundown.

Gate Motor Repair in Pacific
When a gate motor dies in Pacific, it’s often the limit switch, the capacitor, or a control board that finally gave out after years of damp mornings and cold starts. We train on nine motor brands and carry the common service parts, so we’re not ordering everything and coming back next week. We test the motor, quote the repair in writing, and stand behind it with a full-year guarantee. The Gate Motor Repair in Pacific page has the details and typical costs.

What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Pacific
We work across nine gate-motor brands, and the ones we see most in Pacific drives are FAAC and BFT swing operators on residential gates, plus Linear and Viking on older or simpler systems. Technicians carry common boards, caps, and limit switches for these brands in the truck. More on our brands.
Pricing for Gate Company in Pacific, WA
| Service | Typical range in Pacific |
|---|---|
| Gate repair service call | $70 – $120 |
| Gate motor repair service call | $70 – $120 |
| Gate motor replacement (parts included) | $850 – $1,600 |
| Swing gate opener installation | $1,800 – $3,000 |
| Sliding gate opener installation | $2,000 – $3,200 |
| Gate repair hourly rate | $90 – $140 |
| Motor arm replacement | $420 – $920 |
| Limit switch replacement | $160 – $320 |
| Control board replacement | $300 – $650 |
| Post realignment or replacement | $500 – $1,600 |
What pushes Pacific prices to the higher end of these ranges is access and the condition of the existing work. A gate post that has been rotting in wet soil for years takes longer to dig out than one set in gravel. A motor swap on an old chain-link gate with non-standard mounting costs more than one on a newer steel frame. Either way, you get the number in writing before we start. No one pays a dime they didn’t already approve.
Neighborhoods We Serve in Pacific
We cover the whole city of Pacific, from the residential streets off Stewart Road down through the valley neighborhoods. Response is generally same-day or next-morning for gate repair calls in the Pacific area, depending on when you call and what the job looks like.
- The area around Pacific City Park and 3rd Avenue
- Streets south of Stewart Road toward the county line
- The valley floor neighborhoods near the White River
- The residential blocks along Valentine Avenue
- Properties near the Pacific city boundary with Sumner
Service Area – Cities Near Pacific
Our Pacific crews also run calls to the nearby cities. If you’re in Federal Way or Milton, see Federal Way, WA and Milton, WA for local specifics. For the valley region around Puyallup, check Puyallup, WA. If you’re further south, the Auburn, CA page explains coverage there.
Serving Pacific, WA – Our Local Coverage Area
We’re based in the Pacific area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pacific
Most repair calls in Pacific are reached the same day or by the next morning. We’re in the area regularly, and dispatch runs on live phones, so you talk to a person who can schedule you on the spot. Call (469) 530-2485 for the first available time.
Pacific is small, and many gate installs are straightforward replacements of an existing gate, which typically doesn’t trigger anything beyond the property’s own rules. If you’re in an HOA-covered neighborhood, we build to the panel’s spec and use hardware that matches. We’ll flag anything that needs a permit before we start.
A service call in Pacific runs $70 to $120, and if the repair goes ahead that call is often absorbed into the work. You get a written price before we do anything beyond diagnosing the problem. Call (469) 530-2485 for a firm quote on the phone.
If you have a gate that won’t close, a motor that hums and does nothing, or a post that’s rotted out, call (469) 530-2485. A live person answers, and we’ll get you scheduled for a free estimate. Lonnie Burke leads the crew; the Garrison Standard sets the bar on every gate we touch.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pacific Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.





Before
After
Before
After
Before
After