Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Pasadena, TX
Carver Gate Repair handles gate repair, gate installation, and gate motor work across Pasadena, TX, with written pricing before any work starts and a full-year guarantee on every repair. Most Pasadena gates are steel or ornamental iron on concrete slabs, and the coastal humidity plus clay-heavy soil means hinges bind, posts lean, and motor housings corrode faster than homeowners expect. If your gate won’t open or swings out of alignment, call (469) 530-2485 and a live person answers around the clock.
Why Pasadena Homes Are Different
Pasadena sits just southeast of Houston, close enough to the Ship Channel that salt air and industrial humidity work on gate hardware year-round. We see more rusted hinge pins, seized roller bearings, and corroded motor control boards here than in drier parts of the metro. The soil is another factor: heavy clay expands when wet and shrinks in dry spells, so concrete gate posts shift over time. A gate that closed fine in March may drag by August, not because the hinges failed but because the post moved a quarter inch.
Housing here runs older than in many surrounding suburbs. Large lots with drive gates are common south of Spencer Highway and around Burke Road, Red Bluff Road, and Fairmont Parkway, where many homes were built between the 1960s and 1980s. Those gates are often on their second or third opener by now, and the wiring is not always up to current code for motor loads. Newer subdivisions off Beltway 8 use more modern swing and slide operators, but the same humidity and soil apply. Pasadena does not have a single citywide HOA, but many individual neighborhoods enforce their own standards on gate height, material, and set-back, so we confirm requirements before ordering anything custom.
Our Main Pasadena Services
The three calls we answer most in Pasadena are broken gates, full gate replacement jobs, and openers that quit responding. Each has its own dedicated page with local pricing and detail.
Gate Repair in Pasadena
Most repair calls in Pasadena start with a gate that drags, sticks, or will not latch. We see a lot of roller replacement, hinge rebuilds, post straightening, and weld repair on ornamental iron gates, plus ground-track work on slide gates. The humidity means we replace hardware with sealed or stainless components where the original used plain steel. Every repair gets a written price before work starts and a written one-year guarantee. Details and current pricing are on the Gate Repair in Pasadena page.
Gate Installation in Pasadena
New gate jobs here usually mean replacing a rusted-out steel gate or adding an automatic gate to a property that never had one. We size posts for the clay soil, set them below the movement zone, and match the gate style to the house where possible. Because Pasadena lots vary so much, we measure on site and produce a written quote before ordering material. See the Gate Installation in Pasadena page for the full process and price ranges.
Gate Motor Repair in Pasadena
When a Pasadena gate will not respond to the remote or keypad, the problem is usually in the motor, the control board, or the loop detector. Coastal humidity is hard on circuit boards, and we replace capacitors and limit switches more often here than in drier markets. Our technicians work on nine brands, including Viking, Ghost Controls, and DoorKing, and we stock common parts for same-visit repairs in most cases. The Gate Motor Repair in Pasadena page covers motor replacement pricing and same-day availability.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Pasadena
Our technicians carry training and parts support for Viking, Ghost Controls, DoorKing, and Elite systems, among others. Most Pasadena gates run on one of the major residential or light-commercial brands, and we keep common control boards, limit switches, and remotes ready to dispatch. Full brand coverage is listed on our brands page.
Pricing for Gate Company in Pasadena, TX
| Service | Typical range in Pasadena |
|---|---|
| Gate roller replacement (each) | $90 – $150 |
| Hinge rebuild or replacement | $150 – $300 |
| Post straightening (minor lean) | $250 – $450 |
| Weld repair on ornamental iron | $180 – $380 |
| Gate motor diagnostic | $75 – $125 |
| Limit switch adjustment or replacement | $120 – $220 |
| Control board replacement | $350 – $650 |
| Swing arm operator replacement | $750 – $1,400 |
| Slide gate motor replacement | $900 – $1,700 |
| New automatic gate (single swing, incl. operator) | $3,200 – $6,500 |
Pasadena pricing pushes toward the higher end when posts have shifted and need resetting before hardware goes on, or when years of coastal corrosion mean multiple components fail at once. Whatever the number is, you get it in writing before we start, and the price does not move when the work is underway.
Neighborhoods We Serve in Pasadena
We work throughout Pasadena, from the older subdivisions near Red Bluff Road to newer construction along Fairmont Parkway and the Beltway 8 corridor. Typical response time in the city is same-day for repair calls placed before early afternoon, next morning otherwise.
- Village Grove East
- Parkgate
- Baywood Oaks
- Golden Acres
- Allendale
Service Area – Cities Near Pasadena
Carver Gate Repair serves Pasadena and the surrounding southeast Harris County communities. Our crews also cover South Houston, TX, Galena Park, TX, Deer Park, TX, and Channelview, TX. Scheduling for all these areas runs through our Houston dispatch office, with technicians assigned locally.
Serving Pasadena, TX – Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pasadena
Most Pasadena repair calls placed before early afternoon get a same-visit window. Emergency calls for a gate stuck open, which is a security issue, are dispatched as quickly as a technician is available. Call (469) 530-2485 and a live person will give you a straight arrival window.
Most residential gate replacements in Pasadena do not require a city permit if the gate is on an existing driveway and posts are being reused or reset in the same location. Electric gate operators may need to meet city code for safety edges and entrapment protection. We check the requirements for your specific address before quoting.
Yes. If your neighborhood has an HOA with gate standards, we work from their written requirements for height, material, and color before ordering anything. Bring the HOA document to the measure, or we will note the community and confirm during the quote process.
Contact Carver Gate Repair in Pasadena
For a free estimate on gate work in Pasadena, call (469) 530-2485. You will reach a live person who can schedule a visit with a background-checked, uniformed technician. Every job starts with a written price, and every repair carries a 365-day written guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pasadena Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.