Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Paterson, NJ
Carver Gate Repair is Paterson’s dedicated gate company, handling automatic driveway gates, pedestrian gates, and the motor systems that run them. Homes across Paterson range from 1930s Colonials in Eastside Park to post-war construction near Totowa, and many properties sit on compact lots where a swing gate has to clear a short driveway or a slope. Those site conditions change how gates are installed and repaired here. If a gate won’t open, sags on its hinges, or the motor runs but nothing moves, call us at (469) 530-2485 and we’ll send a background-checked, uniformed technician to diagnose it.
Why Paterson Homes Are Different
Paterson’s housing stock runs older than most New Jersey suburbs. Many driveways are narrow, some slope toward the street, and a number of homes near the Passaic River sit on ground that holds moisture longer than the hilltop sections around Eastside. Moisture works on gate posts and underground conduit the same way it works on basements. We see hinges seized by rust, loop detector wire that tests fine wet and fails dry, and gate posts that have drifted out of plumb because the footing wasn’t set deep enough for the soil it sits in. Those are Paterson problems, and they’re the first thing our technicians check when a gate starts dragging or a motor starts grinding.
Codes matter here too. Paterson requires permits for any gate installation that involves new concrete footings or a new electrical run from the house. A homeowner can’t always see a permitting issue coming, but we’ll flag it before any work is scheduled. Understanding that means fewer surprises when the inspector arrives.
Locking hardware also gets more use in Paterson than in quieter communities. We recommend hardware rated for daily cycles, not the light-duty hinges and latches sold for weekend gates.
Our Main Paterson Services
Most calls to (469) 530-2485 involve one of three jobs: a gate that won’t move, a gate that moves wrong, or a gate that never got installed right in the first place. Each service has its own Paterson page with pricing and specifics.
Gate Repair in Paterson
A repair call in Paterson usually starts with a hinge that’s seized, a wheel that’s worn flat, or a gate leaf that’s scraped the driveway so many times it’s pulled the post out of square. We inspect the posts, hinges, wheels, and latch before writing anything down. Gate Repair in Paterson covers what we check, what typical repairs cost, and how we handle repairs on older iron gates that have been sitting on the same posts for fifty years.
Gate Installation in Paterson
New installations in Paterson are constrained by lot size more than anything else. A swing gate needs room to swing; if the driveway doesn’t have it, a slide gate on a track is the better answer. We measure on site, order the right hardware for the gate’s weight, and set footings below frost depth. The full process, including what the permit requires and what a written installation price includes, is on the Gate Installation in Paterson page.
Gate Motor Repair in Paterson
Motors fail in predictable ways. The limit switch stops reading, the gear strips, the capacitor burns out, or the circuit board stops talking to the remote. In Paterson, we also see motor failures after heavy rain when a control box isn’t sealed against the weather. Technicians carry boards, gears, capacitors, and limit switches for the brands we service. Gate Motor Repair in Paterson lists the motor brands we work on and what a motor repair typically costs.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Paterson
We work on most gate motors installed across Paterson, including FAAC, BFT, Linear, and Viking. Common replacement parts – capacitors, limit switches, control boards, and remote receivers – are stocked in our vehicles so a repair doesn’t stretch into a second day. See our brands for the full list.
Pricing for Gate Company in Paterson, NJ
| Service | Typical range in Paterson |
|---|---|
| Gate tune-up (hinge lube, sensor alignment, limit reset) | $149 – $229 |
| Hinge replacement (pair) | $180 – $350 |
| Gate wheel or roller replacement | $120 – $280 |
| Gate post reset or straighten | $300 – $600 |
| Limit switch replacement | $160 – $280 |
| Loop detector replacement | $250 – $400 |
| Capacitor replacement | $110 – $220 |
| Circuit board replacement | $380 – $650 |
| Gate motor replacement (parts and labor) | $800 – $1,700 |
| Full gate automation system (motor, arms, safety edges, controls) | $2,800 – $5,500 |
Price in Paterson moves with a few things: a motor on a custom iron gate weighs more than one on an aluminum gate, a post in wet soil costs more to reset than one in dry fill, and a permit requirement can add a line item that doesn’t exist in every town. We deliver a written price before any work starts, so the quote on paper matches the invoice.
Neighborhoods We Serve in Paterson
We work across Paterson daily, from the older streets around Eastside Park to the residential blocks near South Paterson and up toward the Totowa line. Technicians know the one-way streets, the parking conditions, and which blocks need a smaller service vehicle to fit a driveway approach.
- Eastside Park
- South Paterson
- Lakeview
- Riverside
- Northside
On a normal weekday, we can typically have a technician to most Paterson addresses the same day. On weekends we still run calls, and the phones are answered by a live person around the clock.
Service Area – Cities Near Paterson
Our Paterson crews also serve the surrounding area. We run calls into North Bergen, NJ, cross the river toward Jersey City, NJ, and regularly cover nearby Passaic County neighborhoods. We also serve Union City, CA and Newark, TX through our broader network.
Serving Paterson, NJ – Our Local Coverage Area
We’re based in the Paterson area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Paterson
Most weekday repair calls in Paterson are scheduled the same day. The phone line is answered by a live person 24/7, so you can call (469) 530-2485 at any hour and get a straight answer on scheduling. Weekend service is also available.
Yes, in most cases. New gate installations that involve fresh concrete footings or a new electrical run from the house need a permit in Paterson. We flag the requirement before work is scheduled so you aren’t caught off guard by an inspector later.
We cover all of Paterson, including Eastside Park, South Paterson, Lakeview, Riverside, and the surrounding blocks. If your address is within the city limits, a technician will come out. Call (469) 530-2485 to confirm your address and get a scheduled time.
For a written price on any gate job in Paterson, call Carver Gate Repair at (469) 530-2485. A live person answers, 24 hours a day, every day of the year. Back to home.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Paterson Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.