Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Progress Village, FL
Carver Gate Repair handles gate repair, gate installation, and gate motor work for homeowners across Progress Village, FL. This page is the starting point: what makes Progress Village jobs different, what work typically costs here, which neighborhoods we serve, and how to reach us at (469) 530-2485. Each service has its own dedicated Progress Village page, linked below, where you’ll find deeper detail on that specific job.
Why Progress Village Homes Are Different
Progress Village was built largely as working-class housing in the 1960s, and much of the original gate hardware still standing today dates back decades. Salt air from Tampa Bay moves through this part of Hillsborough County year-round, which corrodes hinges, track rollers, and swing-arm pivot points faster than inland neighborhoods experience. We regularly replace rusted hinge brackets and seized wheel assemblies on older chain-link gates in this area, and the failure mode is almost always the same: years of untreated salt exposure compounded by the sandy, shifting soil that settles under gate posts.
Property lines here are tighter than in newer subdivisions, which means swing gates often open over driveways that run close to the street. That geometry forces careful attention to the articulating arm and its travel limits, especially on two-leaf gates where each panel must move in sequence without binding. HOA expectations vary street by street, and in some pockets of Progress Village, any gate visible from the road must match a specific height and finish. We work with that reality directly: the written price we quote reflects the gate and hardware that meet those requirements, not a generic swap.
Soil moisture also plays a role. The low, flat terrain drains slowly after heavy summer rain, leaving gate posts sitting in saturated ground for days. That accelerates post lean on swing gates and throws slide gates out of level. When we set a new post or re-hang an existing gate, we account for that drainage pattern rather than treating Progress Village soil like any other job site.
Our Main Progress Village Services
Most calls from Progress Village fall into two groups: a gate that has stopped opening reliably, and a gate and motor package that needs to be replaced entirely. The three services below each have their own Progress Village page with pricing and detail specific to that job.
Gate Repair in Progress Village
Gate repair here usually means one of three things: a swing gate that sags and drags on the driveway, a slide gate that jumps its track, or a chain-link gate whose hinges have rusted through. In Progress Village, sagging is the most common, because the sandy soil under the hinge post settles unevenly over time. We re-level the frame, reset or replace the hinge hardware, and confirm the gate clears its arc before we leave. For the full breakdown of what a Gate Repair in Progress Village job includes and costs, see the dedicated page.
Gate Installation in Progress Village
New gate installation in Progress Village almost always includes concrete or steel post setting, because existing posts on older lots are often too corroded to reuse. We measure the opening, confirm swing clearance against the driveway slope, and order the gate to match any HOA height or finish requirement on that street. The Gate Installation in Progress Village page covers material options, lead times, and a line-by-line price table.
Gate Motor Repair in Progress Village
Motor failures in this area track closely with humidity and power surges. We replace failed limit switches, repair or swap loop detectors that no longer sense a car, and match the correct replacement board or motor to the brand already installed. Because Progress Village has a mix of older FAAC, Linear, and Viking operators, the job starts with identifying what is actually mounted on the gate. The Gate Motor Repair in Progress Village page details diagnostics, common failure points, and what a typical motor replacement costs here.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Progress Village
Our technicians work on FAAC, BFT, Linear, and Viking gate operators, among others. Because we stock common control boards, limit switches, and receiver parts for these brands, most Progress Village repairs don’t wait on a part to ship. See our brands for the full list of equipment we’re trained to service.
Pricing for Gate Company in Progress Village, FL
| Service | Typical range in Progress Village |
|---|---|
| Gate repair (labor only) | $95 – $165 |
| Gate sag / re-hang and alignment | $180 – $320 |
| Gate motor replacement (labor + standard motor) | $650 – $1,100 |
| Limit switch replacement | $140 – $220 |
| Loop detector replacement | $280 – $420 |
| Remote receiver / radio repair | $120 – $240 |
| Hinge replacement (set of two) | $110 – $190 |
| Track repair / wheel replacement (slide gates) | $210 – $360 |
| Full gate installation (standard single swing) | $1,800 – $3,400 |
| Gate post setting (steel or concrete, per post) | $180 – $320 |
What pushes a Progress Village job toward the upper end is usually access: a gate post set in saturated ground, a motor mounted inside a tight enclosure, or a swing gate that must clear an unusual driveway slope. Whatever the number, it is written down and agreed before any work begins. That price does not move at the door.
Neighborhoods We Serve in Progress Village
We cover all of Progress Village, from the streets nearest the bay to the inland blocks that border the larger Tampa area. Response time across the neighborhood runs one to two hours for most gate repairs, depending on traffic on US 41 and 78th Street.
- Progress Village central
- Streets south of Palm River Road
- East Progress Village near 78th Street
- Blocks west of US 41
- Homes along the Palm River edge
Service Area – Cities Near Progress Village
While this page focuses on Progress Village, our crews also cover larger gate jobs across the region. If you’re searching for gate work in Tampa, FL, Miami, FL, Orlando, FL, or Jacksonville, FL, those pages carry the same Garrison Standard pricing and written guarantee. Dispatch and scheduling for Progress Village are coordinated from our South Florida office.
Serving Progress Village, FL – Our Local Coverage Area
We’re based in the Progress Village area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Progress Village
Most Progress Village gate repairs are reached within one to two hours. Emergency calls, where a gate will not close and the property is open to the street, are prioritized and dispatched the same day. Call (469) 530-2485 and a live person will confirm the arrival window.
Yes. If your street’s HOA requires a specific gate height, finish, or setback, we quote to that standard and note it on the written price. For jobs that need a Hillsborough County permit, we prepare the work to pass inspection and coordinate the schedule around permit approval.
It is. Every Progress Village job gets a written price before any work starts. If the scope changes during the job, you approve a new written number before that added work begins. The price never moves at the door, and the repair guarantee is also in writing for a full year.
For a straight answer on your gate problem and a written price, call (469) 530-2485. A live person answers, day or night, and the estimate is free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Progress Village Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.