Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Reedley, CA
We’re the Reedley gate company that shows up when we say we will, with a written price in hand before any work starts. Reedley’s mix of aging ranch homes on large lots, newer subdivisions east of the 99, and rural properties along Manning Avenue means gates here work harder than most. Heat, valley dust, and irrigation-style moisture cycles put real strain on hinges, operators, and control boards. If your gate is sagging, refusing to open, or making a sound it shouldn’t, call us at (469) 530-2485.
Why Reedley Homes Are Different
Reedley sits right where the valley turns genuinely agricultural. Homes in older districts like the ones near Manning Avenue and Buttonwillow Avenue often have custom steel or wood gates built decades ago, mounted on posts that have shifted with dry-season clay. Underground sprinkler overspray is routine here, which means rust at the base of gate posts is a problem we see more in Reedley than in Fresno or Kingsburg. When we pull a rusted hinge or a seized bottom bearing off a Reedley gate, the failure is usually water and mineral buildup, not worn iron.
Newer homes in the Spring Mountain and Quail Creek areas tend toward decorative aluminum and automatic swing operators. Those jobs are less about rust and more about control board programming, battery backup, and sensor alignment. The heat in July and August tests every component: capacitor failures and motor overheating spike in Reedley exactly when homeowners most want the gate working on its own.
Reedley’s terrain is mostly flat, but rural properties east and south of town have long gravel drives with solar-powered operators and keypads mounted on pipe posts. Those sites need line-of-sight checks on photo eyes and a different approach than a clipped-lawn subdivision gate. Our crews know the difference before we dispatch the truck.
Our Main Reedley Services
Most Reedley homeowners call us for two reasons: a gate that won’t open, or a motor that opens it but won’t stop at the right place. Each service has its own page so you can get the specific details, pricing, and what to expect.
Gate Repair in Reedley
A sagging gate in Reedley usually means a failed hinge, a cracked weld, or a post that’s leaning out of true. We replace hinges, bearings, wheels, and track, and we re-set posts when the ground has shifted. We also replace bent or rusted gate frames, cut damaged pickets, and repair latches that no longer catch. If safety is a concern because kids or animals get through, tell us on the phone and we’ll prioritize the call. Every repair gets a written guarantee good for a full year. See Gate Repair in Reedley for what we check and what it typically costs here.
Gate Installation in Reedley
New gate installations in Reedley run from simple driveway swing gates to full automated systems with keypads, remotes, and vehicle exit loops. We measure the opening, talk through steel versus aluminum for your budget and exposure, and give a written quote before any fabrication happens. If the gate is on a rural lot with no power nearby, we can spec a solar-ready operator or run conduit. Reedley’s clay soil means we set posts deeper than the minimum code in several areas, because we’ve had to go back on posts that were done shallow elsewhere. Start with Gate Installation in Reedley for what a full job includes.
Gate Motor Repair in Reedley
When a Reedley gate operator runs but the gate doesn’t move, or stops halfway, the problem is usually a limit switch, a failing capacitor, or a worn gear inside the operator itself. We carry service parts for most common operators in our trucks, and we bench-test control boards before we condemn them. The dust in Reedley gets into electronics; we blow out and reseal control cabinets as part of the repair, not as an upsell. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Details and pricing are on Gate Motor Repair in Reedley.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Reedley
Our Reedley trucks carry parts and programming tools for Linear, Viking, and Ghost Controls operators, along with the big residential brands you’d expect. We keep common limit switches, capacitors, and control boards in stock so we can usually complete a motor repair in one visit instead of scheduling a parts run. See our brands for the full list.
Pricing for Gate Company in Reedley, CA
| Service | Typical range in Reedley |
|---|---|
| Standard service call and diagnosis | $45 – $95 |
| Hinge replacement per hinge (labor and hardware) | $80 – $160 |
| Gate wheel or caster replacement | $35 – $90 per wheel |
| Track repair or section replacement | $90 – $250 |
| Gate re-weld at stress point (in place) | $60 – $180 per joint |
| Post re-alignment and re-setting in concrete | $200 – $450 per post |
| Limit switch replacement | $95 – $210 |
| Capacitor replacement | $45 – $110 |
| Control board replacement (residential operator) | $240 – $460 |
| Full operator replacement (residential, standard swing) | $650 – $1,300 |
| Photo eye alignment or replacement | $60 – $160 |
| Remote or keypad programming (per unit, no parts) | $35 – $75 |
What pushes a Reedley job to the top of those ranges is usually rust damage that takes longer to remove, a post that needs breaking out and re-setting, or an operator buried in dust that needs a full internal cleaning before tuning. Whatever the job, you’ll get a written price before we start. If the number changes, it’s because we called you first and you approved it.
Neighborhoods We Serve in Reedley
We cover all of Reedley and the rural roads around it. Response is usually same-day for repairs when you call before early afternoon; installations are scheduled by measure and material lead time. We serve:
- Downtown Reedley and the older subdivisions off Buttonwillow Avenue
- Spring Mountain and Quail Creek areas east of the 99
- Properties along Manning Avenue and Dinuba Highway
- Rural lots south toward the Kings River
- Homes off Olson Avenue and throughout the 93654 ZIP
Service Area – Cities Near Reedley
We run calls from Reedley into the surrounding communities, and we keep the same written-price and full-year-guarantee standard no matter where the gate is. That includes Parlier, CA, Orange Cove, CA, Kingsburg, CA, and Selma, TX. If you’re on the edge of the service area, call us and we’ll tell you honestly whether we can get a crew there.
Serving Reedley, CA – Our Local Coverage Area
We’re based in the Reedley area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Reedley
For repairs, we usually reach Reedley homes the same day if you call before early afternoon. Installations depend on permitting, materials, and our schedule. Call (469) 530-2485 and we’ll give you a straight arrival window, not a four-hour guess.
Most direct gate replacements don’t need a permit, but any new concrete work, electrical run, or driveway widening might. We handle the permit check as part of the written quote so there’s no surprise mid-job. Call (469) 530-2485 to get a free measure and scope.
Yes. We regularly work rural properties around Reedley, including solar-powered operators and long-drive intercom systems. Call us with your cross streets and we’ll confirm coverage and arrival time before you commit.
If your gate isn’t doing what it should, call Carver Gate Repair at (469) 530-2485. We’ll give you a free estimate, a written price before work starts, and a written guarantee on every repair. Lonnie Burke runs our crew to one standard: the gate works right, the site is left clean, and the price doesn’t move.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Reedley Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.