Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Rodeo, CA
Gate repair in Rodeo, CA typically runs between $180 and $340 for common fixes like hinge realignment, limit switch adjustment, or a replacement keypad, while full motor replacements land between $850 and $1,600 depending on the operator type. Most Rodeo calls are handled same day or next day because our scheduling is coordinated from the San Francisco Bay Area office and crews stay close to the I-80 corridor. If your gate won’t open or is sagging against the post, call (469) 530-2485 and the phone is answered by a live person, not a queue.
Why Rodeo Homes Are Different
Rodeo sits near the Carquinez Strait, which means two things for gate hardware: salt air and wind. We see more corrosion on gate hinges, latch hardware, and exposed control boxes in Rodeo than in inland Contra Costa County towns a few miles east. A steel gate that would last years in Walnut Creek can show pitting and rust blooms here inside a season. That changes what we recommend: stainless or powder-coated hardware, sealed conduit fittings, and control boxes rated for outdoor exposure rather than the entry-level units builders sometimes install.
Housing stock in Rodeo is largely mid-century single-family homes, many with side-yard gates on concrete slabs that have settled over 50 or 60 years. Settled concrete means the gate post leans, and a leaning post means the gate drags or won’t latch. We also work on a number of long driveways in the hills above town where swing gates take direct afternoon sun and evening wind off the water. Those gates need operators with adjustable force settings and hinges that won’t bind when the post shifts a quarter inch in wet winters.
Our Main Rodeo Services
The two calls we take most often from Rodeo homeowners are a gate that has stopped opening and an old manual gate the owner wants automated. Each service has its own page with local pricing and detail.
Gate Repair in Rodeo
Most repair calls in Rodeo involve hinges pulling loose from weathered posts, latch strikes that no longer line up, or a gate that scrapes the concrete after the slab moved. We inspect the post, the hinge welds or bolts, the latch geometry, and the way the gate hangs before quoting anything. The written price comes before any work starts, so the number does not move at the door. For details on what repair covers and what it costs, see Gate Repair in Rodeo.
Gate Installation in Rodeo
New gate work in Rodeo usually means either replacing a rusted steel gate with a powder-coated one, or building a gate where only a chain-link panel existed. Soil here is clay-heavy in places, so post footings need to be set deeper than code minimum in some yards. We measure, order, and schedule installation with a written price given before work begins. The full process and local pricing are on Gate Installation in Rodeo.
Gate Motor Repair in Rodeo
Gate motors in Rodeo suffer from salt air and power fluctuations more than mechanical wear. Limit switches corrode, loop detectors lose sensitivity after heavy rain, and swing arms bind when the post shifts. We carry parts for the common motor brands and can usually diagnose the problem in one visit. A motor repair is quoted in writing before any work starts. See Gate Motor Repair in Rodeo for pricing and what the job involves.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Rodeo
Our technicians work on FAAC, BFT, Linear, and Viking equipment regularly, along with five other major motor brands. Common parts for these systems are stocked on our trucks, which keeps turnaround faster for Rodeo jobs than waiting on a distributor shipment. See our brands for the full list of systems we train on.
Pricing for Gate Company in Rodeo, CA
| Service | Typical range in Rodeo |
|---|---|
| Hinge repair or replacement | $180 – $340 |
| Latch or lock repair | $120 – $200 |
| Gate realignment | $200 – $350 |
| Track or roller replacement | $300 – $700 |
| Keypad or receiver replacement | $180 – $320 |
| Loop detector replacement | $250 – $450 |
| Swing arm motor replacement | $850 – $1,300 |
| Sliding gate motor replacement | $900 – $1,600 |
| Full gate installation (manual) | $1,200 – $3,000 |
| Full gate installation (automated) | $3,500 – $8,000 |
Prices in Rodeo run toward the higher end when salt corrosion has spread to the post or when a gate needs complete realignment after years of wind loading. Every quoted price is in writing and agreed before work begins. If the number changes, we tell you before touching the gate.
Neighborhoods We Serve in Rodeo
We cover the entire Rodeo area, including the residential streets off Parker Avenue, the hillside homes above San Pablo Avenue, and the neighborhoods closer to the shoreline. Response for most Rodeo calls is same day when called before early afternoon, next morning otherwise.
- Parker Avenue corridor
- Hillside neighborhoods above San Pablo Avenue
- Streets near Rodeo Creek
- Homes off First Street
- Marina area near the shoreline
Service Area – Cities Near Rodeo
We also take calls from homeowners in Hercules, CA, Pinole, CA, El Sobrante, CA, and Benicia, CA. If you are just outside Rodeo, call (469) 530-2485 and the scheduler can tell you which crew covers your street and when.
Serving Rodeo, CA – Our Local Coverage Area
We’re based in the Rodeo area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rodeo
Most Rodeo calls placed before early afternoon are dispatched same day. Our scheduling runs from the San Francisco Bay Area office, and the crew closest to your neighborhood takes the job. The phone is answered by a live person 24 hours a day, including weekends.
For most repairs, no. For new gate installation, some Rodeo neighborhoods have HOA design rules that apply to gate height, material, and color. We can tell you what to check before you sign anything, and we do not start work until the written price is approved.
Yes. Salt air corrosion is common on shoreline property, so we inspect the motor housing, control board, and hinge hardware closely on those calls. The price is written before any work begins, and every repair carries a written guarantee good for a full year. To schedule, call (469) 530-2485.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Rodeo Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.