Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Bruno, CA
Gate repair in San Bruno, CA comes down to three things: the gate itself, the motor that moves it, and the hardware holding both to the hillside. Homes here sit on some of the steepest lots on the peninsula, which means gate posts shift, swing arms bind, and motors work harder than they would on flat ground. We’re the gate company San Bruno calls when a gate stops closing, a motor burns out, or a driveway needs a complete new setup. Carver Gate Repair handles all three, with written prices before any work starts and a full-year guarantee on every repair. Call (469) 530-2485 and a live person answers.
Why San Bruno Homes Are Different
San Bruno’s terrain shapes the work. From the hillside streets off Sneath Lane to the flats along San Bruno Avenue, a surprising number of driveways pitch upward at angles that stress swing gate hinges and force slide gate wheels to fight gravity. A gate that worked fine for fifteen years on a level South City street will fail faster on a 12-degree San Bruno slope. We see it regularly: rollers flatten, chain drives stretch, and cantilever gates start dragging because the grade was never accounted for in the original install.
The housing stock matters too. Many San Bruno homes date from the 1940s through 1960s, with narrow side yards, retaining walls, and driveway piers built before modern gate operators existed. That means retrofits, not clean-slate installs. We’re used to working around existing concrete, rerouting conduit along stucco, and fitting operators where clearance is tight. The fog off the coastal range keeps things damp from June through August, which accelerates rust on exposed tracks and hinges. Galvanized hardware and sealed electronics make a measurable difference here.
Our Main San Bruno Services
San Bruno homeowners call us most about two kinds of problems: a gate that’s failed or failing, and a motor that’s stopped responding. Each has its own page below, with the pricing and process laid out in full.
Gate Repair in San Bruno
Gate repair in San Bruno usually means weld fixes, hinge and roller replacement, sag correction, or track realignment. Hillside lots put pressure on every moving part, and the damp marine air shortens the life of uncoated steel. We inspect the full gate before quoting, because a gate that scrapes at the latch often has a post that’s moved, not just a hinge that’s worn. The written price covers parts and labor, agreed before any work starts. Read the full breakdown on our Gate Repair in San Bruno page.
Gate Installation in San Bruno
New gate installation in San Bruno starts with the driveway itself: grade, width, and what the pillars are built from. Many older San Bruno homes have masonry piers that need steel post reinforcement before a gate can hang on them. We fabricate gates to fit the existing opening rather than forcing a stock panel onto a slope it was never designed for. Every installation includes a free site measure and a written price before fabrication begins. See the full scope on our Gate Installation in San Bruno page.
Gate Motor Repair in San Bruno
Gate motor repair in San Bruno often comes down to limit switches, loop detectors, and the connections between board and motor. When a motor runs but the gate won’t move, the operator is usually fighting the grade or a seized part downstream. We test the full run before replacing anything, and we stock replacement boards and arms for the brands most common on San Bruno driveways. Every motor repair carries a written one-year guarantee. Details and pricing are on our Gate Motor Repair in San Bruno page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Bruno
We repair and service operators from Linear, Viking, Ghost Controls, and DoorKing, among others. Our technicians carry the common boards, limit switches, and receiver parts for these brands on the truck, which means most San Bruno motor repairs finish in a single visit. See the full list on our brands page.
Pricing for Gate Company in San Bruno, CA
| Service | Typical range in San Bruno |
|---|---|
| Gate repair, general hinge and alignment work | $180 – $340 |
| Gate operator / motor replacement | $650 – $1,200 |
| Limit switch or loop detector replacement | $190 – $340 |
| Swing arm or articulating arm replacement | $250 – $475 |
| Track realignment or roller replacement | $150 – $300 |
| Full gate installation, standard driveway | $1,800 – $4,500 |
| Intercom and access control integration | $400 – $900 |
| Service call, diagnostics and minor adjustment | $89 – $160 |
Prices in San Bruno run slightly higher than the flatland peninsula cities because of slope work and older-pier retrofits, which add labor hours. Every quote is in writing before work begins, and the number does not move at the door.
Neighborhoods We Serve in San Bruno
We cover the full city, from the hillside streets near Crystal Springs to the flats around San Bruno Avenue and the neighborhoods bordering the 280 corridor. We’re typically able to reach most San Bruno calls the same day, depending on call volume.
- Rollingwood
- Portola Highlands
- Crestmoor
- Huntington
- Lomita Park
Service Area – Cities Near San Bruno
Carver Gate Repair covers San Bruno and the surrounding peninsula towns. If you’re in Millbrae, CA, South San Francisco, CA, Pacifica, CA, or Brisbane, CA, we can reach you just as quickly. Dispatch and scheduling are coordinated from the brand’s San Francisco Bay Area office; crews serve San Bruno locally.
Serving San Bruno, CA – Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Bruno
Most San Bruno calls are reached the same day. If a gate is stuck open or closed and you need it secured, tell the dispatcher and we’ll prioritize it. A live person answers the phone 24/7 at (469) 530-2485.
Repairs and motor replacements generally don’t require a permit. New gate installations, especially on hillside lots with retaining walls, can trigger a City of San Bruno review. We’ll tell you during the site measure what your specific project needs.
Every repair carries a written guarantee for a full year from the date of service. If it fails inside that year, the second visit is free, no argument. That’s The Garrison Standard, and it’s in writing on every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Bruno Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.