Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Seabrook, TX
Carver Gate Repair is a gate company serving Seabrook, TX, focused on repair, installation, and motor work for swing and slide gates. Most of the calls we take from Seabrook involve salt-air corrosion on hinges and operators, hardware that has seized because of it, and control boards that have failed after a storm. If your gate is sagging, moving slowly, or making a grinding sound when it opens, call (469) 530-2485 and we’ll send a technician with a written price before any work starts.
Why Seabrook Homes Are Different
Seabrook sits right against Galveston Bay, and that position shapes gate work more than any other factor in the area. The salt air that comes off the water accelerates corrosion on exposed steel hardware, swing gate hinges, and the internal gears of gate motors. We see gates in Seabrook that are only five or six years old with hinge pins already pitted and sticking, where the same hardware fifteen miles inland would have another decade of life. A galvanized or powder-coated hinge set that fails early is rarely a manufacturing problem here; it’s the environment doing exactly what salt air does. That’s why we spec stainless or marine-grade hardware on Seabrook replacements where it makes sense, and why we adjust maintenance recommendations for homes from Todville Road down to the waterfront. The neighborhoods between Nasa Parkway and the bay, including Kirby Seabrook and the streets around Pine Gully, see the heaviest exposure. Humidity also plays a role: sensors and photo eyes that sit near the coast accumulate salt film, which can cause false readings or no reading at all. Electronics fail differently here than they do in drier, inland markets.
Housing stock in Seabrook ranges from mid-century homes near the water to newer construction on the west side of Highway 146. Older properties often have heavier steel gates that were built before swing gate operators were sized carefully, which means the motor does more work than it should and limit switches burn out faster. Newer subdivisions tend to have aluminum gates with articulating arm operators, which fail differently: the arm joints wear, or the internal plastic gear strips. Seabrook’s flat terrain helps gate geometry stay consistent, unlike areas with steep driveways, but the main variable is exposure. Gates facing the bay take more weather than gates set back on quiet interior lots, and the difference shows up in bearing wear and surface rust.
Our Main Seabrook Services
This page is the quick orientation to who we are and how we price gate work in Seabrook. The two services Seabrook homeowners call about most are gate repair and gate motor repair, and installation runs a close third. Each has its own dedicated Seabrook page with detail on scope and pricing.
Gate Repair in Seabrook
Gate repair in Seabrook usually means a swing gate that drags, a slide gate that binds on its track, or a latch that no longer holds. Salt air is the common thread: hinge pins swell with corrosion, wheels freeze up, and steel gates develop surface rust that weakens welds at the corners. Our technicians replace worn hinge hardware, cut and weld damaged steel, straighten rack and v-rail on slide gates, and finish the job with marine-suitable hardware where the exposure calls for it. Repairs are quoted in writing before any work begins, and the work itself is covered by our written guarantee for a full year. Read the full scope on our Gate Repair in Seabrook page.
Gate Installation in Seabrook
Gate installation in Seabrook starts with a site measurement and a conversation about what the gate actually needs to do. We install drive gates and pedestrian gates sized for yard access, driveway width, and the clearance required by the county and any HOA covenants the property falls under. Coastal conditions shape our recommendations: we lean toward steel with marine-grade primer and a factory finish for bay-facing properties, and aluminum for interior lots where lighter weight helps the operator last longer. Every installation includes a written proposal with the full scope, materials, and schedule before you commit to anything, plus a real gate, set in concrete with post depth appropriate for coastal soil. Full detail is on our Gate Installation in Seabrook page.
Gate Motor Repair in Seabrook
Gate motor repair in Seabrook covers operators for swing and slide gates, and the failure we see most often on the bay side is a limit switch that has drifted or a circuit board that has taken on moisture. We work on Viking, Ghost Controls, DoorKing, Elite, and other major brands, and our techs carry common boards, limit switch assemblies, and receiver kits to get most systems running on the first visit. If the motor is making noise but not moving the gate, the problem is often a stripped gear inside the operator, not the wiring. Our repaired motors are covered by our written guarantee for a full year, and we give you a written price before work starts. See the full detail on our Gate Motor Repair in Seabrook page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Seabrook
We service and stock parts for the gate motors most common in Seabrook, including Viking, Ghost Controls, DoorKing, and Elite. We keep common replacement parts like limit switches and control boards in our local service vans, so most jobs don’t wait on a parts shipment. For less common boards and arms, see our brands page for coverage details.
Pricing for Gate Company in Seabrook, TX
These are the price ranges we quote most often for gate work in Seabrook. The final number depends on the gate’s condition, the hardware specified, and the amount of work required to get it right, but this gives a usable frame before you call.
| Service | Typical range in Seabrook |
|---|---|
| Gate repair, common fixes (hinges, latch, alignment) | $180 – $650 |
| Swing gate opener installation | $2,500 – $7,000 |
| Slide gate opener installation | $3,000 – $8,500 |
| Gate motor repair | $200 – $1,100 |
| Control board replacement | $250 – $950 |
| Limit switch replacement | $150 – $400 |
| Loop detector replacement | $250 – $700 |
| Receiver /remote programming | $75 – $200 |
| Full gate installation (drive or garden) | $3,000 – $12,000 |
Prices in Seabrook run higher than inland Houston when gate hardware is being replaced with marine-grade or stainless options, and when repairs require rust removal or reinforcement before new parts go on. Every quote is written, handed to you before work starts, and the number does not move once the job is open.
Neighborhoods We Serve in Seabrook
Our technicians cover the full Seabrook area, from the marinas and residential streets near Clear Lake to the west side of Highway 146. Most Seabrook calls get same-day or next-day service depending on call volume and the time of day.
- Kirby Seabrook
- The area around Pine Gully Park
- Waterfront neighborhoods off Todville Road
- Baywood
- Homes west of Highway 146 near El Lago
Service Area – Cities Near Seabrook
We serve homeowners across the Clear Lake and Galveston Bay communities, including League City, TX, Bacliff, TX, Webster, TX, and La Porte, TX. If you’re in one of these communities and your gate is stuck or your motor has quit, call (469) 530-2485 and we’ll route a technician to you.
Serving Seabrook, TX – Our Local Coverage Area
We’re based in the Seabrook area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Seabrook
For a gate that’s stuck open or won’t close, we typically get a technician to Seabrook the same day or next morning, depending on call volume. Phones are answered live around the clock, so you’re never leaving a message and hoping someone calls back.
Many Seabrook subdivisions have covenants that govern gate style, height, and finish, and some require design review before installation. We recommend checking your HOA’s guidelines before scheduling a full gate replacement. Repair of an existing gate rarely triggers review, but a new gate and motor often does.
We handle the entire system: the steel or aluminum gate itself, the operator and its electronics, safety sensors, and the hardware that connects them. That’s important in Seabrook because a motor failure and a hinge failure often happen together, especially on bay-facing homes.
If your gate is struggling or has stopped moving altogether, call (469) 530-2485 for a clear answer and a written price. Carver Gate Repair is led by Lonnie Burke, and every Seabrook job follows the same Garrison Standard: a live person on the phone, a background-checked technician at the door, and a written guarantee on every repair.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Seabrook Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.