Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Spokane, WA
Gate repair in Spokane means working with long winters, freeze-thaw cycles, and a housing stock that runs from century-old South Hill homes to newer developments up north. Most calls we take involve gates that have shifted out of alignment from ground movement, motors that have given out after years of cold starts, or hinges and welds that have failed under snow load. Carver Gate Repair handles all of it with written prices before work starts and a full-year guarantee on every repair. If your gate won’t open or close reliably, call (469) 530-2485 and a live person will answer.
Why Spokane Homes Are Different
Spokane’s climate punishes gate hardware in specific ways. Winter temperatures routinely drop into the teens, and the repeated freeze-thaw cycles through March and April push concrete footings and steel posts out of true. A gate that swung cleanly in August can bind against its latch post by February. Homes in areas like the South Hill and Manito neighborhoods often sit on basalt shelf, which means post-setting sometimes hits rock sooner than expected. That changes how deep we can anchor, and it changes how we quote the job.
Older properties on the north side and in the Garland District frequently have gates that were installed decades ago with undersized hinges or no diagonal bracing. When we repair those, we’re often correcting the original install, not just replacing a failed part. Meanwhile, newer subdivisions in places like Five Mile and Wandermere tend to have automated gates tied to intercom or keypad systems. Those jobs involve more wiring diagnostics. Different housing stock, different failure patterns, same fix: diagnose it honestly, write the price down, do the work once.
Our Main Spokane Services
Most Spokane homeowners reach out for a gate that won’t close or a motor that stopped responding. These are the three services we run here, each with its own page for specifics.
Gate Repair in Spokane
A sagging gate or a latch that no longer lines up is usually structural: hinges, welds, posts, or the frame itself. We see a lot of freeze-heave damage in Spokane where the post has moved and the gate leaf now drags. Our crew squares the frame, replaces worn hardware, and reinforces weak points rather than just patching the symptom. Every repair carries the 365-Day Done Right Promise in writing. Full details on Gate Repair in Spokane.
Gate Installation in Spokane
New gate work in Spokane means choosing materials and hardware that hold up to snow, ice, and wind. We measure the opening, check the ground for rock, and spec the right hinges and posts for the site rather than pulling a generic package off a shelf. You get a written price for the complete job before any material is ordered. See what’s involved on the Gate Installation in Spokane page.
Gate Motor Repair in Spokane
Cold weather is hard on gate operators. Limit switches stick, circuit boards crack, and batteries in solar or backup systems lose capacity faster in Spokane winters. We diagnose the actual fault, quote the repair in writing, and don’t sell a full motor replacement unless the existing unit is genuinely beyond saving. If the operator is dead, we’ll tell you plainly. Read more at Gate Motor Repair in Spokane.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Spokane
We work on FAAC, BFT, Linear, and Viking systems, among others. Our technicians carry common boards, limit switches, and remote receivers in the truck, so a lot of motor repairs in Spokane finish on the first visit instead of waiting on a part. See our brands for the full lineup.
Pricing for Gate Company in Spokane, WA
| Service | Typical range in Spokane |
|---|---|
| Gate repair (minor hardware, alignment) | $150 – $350 |
| Gate repair (structural, hinge/post work) | $350 – $850 |
| Weld repair on steel gate frame | $200 – $600 |
| Gate motor diagnostics | $95 – $180 |
| Gate motor repair (board, limit switch, receiver) | $250 – $650 |
| Full gate motor replacement | $900 – $2,400 |
| New residential gate installation | $1,800 – $6,500 |
| New gate with motor and keypad/intercom | $4,000 – $11,000 |
What pushes a Spokane job toward the higher end: post replacement when the original was set shallow and moved with frost, rock encountered during digging, and motor replacements on proprietary systems that require brand-specific boards. Whatever the number, you’ll see it in writing before any work begins, and it doesn’t change when the technician arrives.
Neighborhoods We Serve in Spokane
We run calls across the entire Spokane metro. Response time depends on where our dispatch is routing from, but most residential addresses in the city can be reached the same day.
- South Hill
- Five Mile
- Garland District
- Wandermere
- Hillyard
Service Area – Cities Near Spokane
Beyond the city limits, our crews also cover the surrounding Spokane County communities. We work regularly in Airway Heights, WA, Mead, WA, Medical Lake, WA, and Cheney, WA. Dispatch and scheduling for the Spokane area run through our brand’s Seattle office, with crews serving Spokane locally.
Serving Spokane, WA – Our Local Coverage Area
We’re based in the Spokane area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Spokane
Most Spokane residential calls can be reached the same day, and emergency gate failures that leave a home unsecured get priority routing. Call (469) 530-2485 and a live person will tell you the next available window in real time.
Some Spokane neighborhoods with HOAs require architectural review for new gates or major changes to front-yard structures. Permits are typically not required for repairing an existing gate or replacing a motor. Check your HOA documents first; we’ll work from the approved plan.
We cover the city of Spokane plus the nearby communities of Airway Heights, Mead, Medical Lake, and Cheney. If you’re on the edge of the service area, call and we’ll confirm coverage for your address.
If your gate is failing or you want a written quote for a new one, call Carver Gate Repair at (469) 530-2485. A live person answers, the price is in writing before work starts, and every repair carries the full-year guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Spokane Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.