Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Springtown, TX
Carver Gate Repair is the gate company Springtown calls when a gate stops working and a real answer is needed the same day. We work on swing gates, slide gates, and the motor systems that run them, and every job starts with a written price before any work begins. Springtown’s mix of acreage properties, older ranch-style homes, and newer subdivisions means gate setups vary widely from one street to the next. That’s why we dispatch background-checked, uniformed technicians who know the difference between a gate on a half-acre lot and one guarding a five-acre property. Call (469) 530-2485 and a live person answers, day or night.
Why Springtown Homes Are Different
Springtown sits in Parker County, where properties run larger than what you’ll find closer to the metroplex. Many homes are on one to ten acres, and gates here often serve a working purpose: keeping livestock in, controlling access down a long driveway, or securing equipment. That changes the type of equipment we see. Slide gates are more common on Springtown acreage than swing gates, because a slide gate doesn’t need a wide arc of clear ground to operate. Cantilever rollers and V-track systems take a beating from the sandy loam soil and dust that blows across open pasture.
The climate also does its share. Summer heat regularly pushes past 100 degrees, which shortens the life of control boards and capacitors that sit inside metal operator boxes. Winter freezes, though less common, still cause condensation inside housings and make cold joints fail. Then there’s the wind. Springtown gets steady spring winds that throw gates out of plumb and put stress on hinges, posts, and the operator arm. A gate that opens fine on a calm day can bind when a 30 mph gust hits it. We account for that when we set limits and mount operators.
Permits matter less here than inspection habits. Parker County has no countywide gate permit requirement for most residential work, but some subdivisions inside Springtown city limits have their own covenants. If your property is in an HOA, the gate style, height, and even operator placement may already be decided for you. We’ll work within those rules.
Our Main Springtown Services
Three services cover nearly every call we get in Springtown: repairing gates that have failed, installing new gates from scratch, and repairing the motors that open and close them. Each has its own page with pricing and specifics for Springtown.
Gate Repair in Springtown
Most repair calls in Springtown come down to a gate that’s sagging, dragging, or won’t stay closed. We replace broken hinges, straighten or reset posts, weld cracked frames, and rehang gates so they move without binding. On acreage properties, a gate that drags in the dirt for a month usually means a burned-out motor next, because the operator has been working against resistance the whole time. We’d rather fix the gate before that happens. This is the most-requested service in Springtown, and the page covers what it costs and how soon we can get there. Gate Repair in Springtown
Gate Installation in Springtown
A new gate on a Springtown property starts with the question of what you actually need it to do. Keep horses in? Keep trucks out? Handle a 20-foot opening across a caliche driveway? We measure the opening, check the ground for slope and soil type, and build or source a gate that matches the load on the posts and the operator. Installations on Springtown acreage often need longer runs of conduit and a dedicated power line out to the gate location, which we handle as part of the job. Gate Installation in Springtown
Gate Motor Repair in Springtown
Gate motors in Springtown work harder than they do in town. Dust gets into the limit switch, heat kills capacitors, and wind loads make the operator fight the gate every cycle. We repair motors and control boards on nine major brands, and we carry common parts for Linear, Viking, Ghost Controls, and DoorKing systems on the truck so many repairs are done in one visit. We also replace failed loop detectors and remote receivers on existing systems. Gate Motor Repair in Springtown
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Springtown
Our technicians work on gate operators from Linear, Viking, Ghost Controls, and DoorKing, along with five other major brands. We keep common boards, remotes, and limit switches for these systems in local stock, so a routine motor repair often goes from diagnosis to done in the same visit. Our brands page lists what we support and how we match parts to the system already on your property.
Pricing for Gate Company in Springtown, TX
Here’s what Springtown homeowners can expect to pay for common gate work. These are the ranges we quote from, and you’ll always get a written price before any work starts.
| Service | Typical range in Springtown |
|---|---|
| Gate repair (minor: hinge, latch, realignment) | $150 – $400 |
| Gate repair (major: post reset, weld, structural) | $400 – $1,200 |
| Gate installation (single swing, manual) | $1,500 – $3,500 |
| Gate installation (double swing, manual) | $2,500 – $5,500 |
| Gate installation (slide gate, manual) | $3,000 – $6,500 |
| Gate motor repair (limit switch, capacitor, receiver) | $200 – $475 |
| Gate motor replacement (standard swing operator) | $850 – $1,800 |
| Gate motor replacement (slide operator) | $1,200 – $2,600 |
| Control board or loop detector replacement | $400 – $950 |
| New gate opener system (installed, with two remotes) | $1,600 – $3,800 |
Longer runs of underground power and larger gate spans push Springtown prices toward the high end of these ranges. What won’t move is the number we write down. The price is set before work begins, and if a repair fails within a year, we come back and fix it at no charge.
Neighborhoods We Serve in Springtown
We run calls across all of Springtown, from developments near Highway 199 to the open acreage off Farm Road 51 and toward the Wise County line. Response time to most Springtown addresses is typically same day or next morning, depending on when you call.
- Springtown city limits
- Properties along Highway 199
- Farm Road 51 corridor
- Acreage north toward Agnes
- Subdivisions near Springtown High School
Service Area – Cities Near Springtown
Our Springtown crews also cover the surrounding Parker County communities. If you’re in Azle, TX, Newark, TX, Weatherford, TX, or Aledo, TX, the same live-answer phone number and written-price policy apply to your job.
Serving Springtown, TX – Our Local Coverage Area
We’re based in the Springtown area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Springtown
Most Springtown calls are reached the same day if you phone before mid-afternoon, and the next morning otherwise. Emergency calls where a gate is stuck open or a vehicle is trapped behind it are prioritized. Call (469) 530-2485 and a live person picks up, 24/7, including weekends.
Most residential gate repair and replacement in Springtown doesn’t require a city permit. But if your home is in an HOA, the association may have rules on gate style, height, and color before installation begins. We’ll work within those requirements, and we’ll flag any obvious conflict during the estimate.
Scheduling and dispatch run from our Dallas-Fort Worth office, and our technicians serve Springtown locally throughout the week. That structure means the phone is staffed around the clock, and a written price, background-checked technician, and one-year written guarantee apply to every Springtown job. Call (469) 530-2485 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Springtown Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.