Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lake Shore, WA
We’re Carver Gate Repair, a gate company serving Lake Shore, WA with repair, installation, and gate motor work. Every job gets a written price before work starts, a uniformed and background-checked technician, and a one-year written guarantee. Lake Shore gates deal with coastal moisture, lots that slope toward the water, and drives that have to work with older landscaping. That combination wears hinges, racks, and operators differently than inland properties, which is why we approach every job here by looking at the whole gate, not just the part that failed. Call (469) 530-2485 for a free estimate.
Why Lake Shore Homes Are Different
Lake Shore sits right against the water, and that matters more than most people think. The marine air carries salt and moisture year-round, and it settles into every exposed surface: hinge pins, track rollers, limit switch housings, circuit boards. We regularly open operator boxes in Lake Shore and find corrosion that a homeowner would never see from the outside. The gate still opens and closes, but the board underneath is failing slowly. Add to that the terrain. Many Lake Shore properties are built on grades that run down toward the shoreline, so the gate sits at an angle, and a gate that’s not hung level flexes every time it cycles. That flex is what kills hinges early and throws limit settings off. Older homes here often have narrow side yards and established trees and hedges right up against the drive, which means an install has to account for swing radius and root zones before the first post hole is dug. We plan for all of it.
Our Main Lake Shore Services
Most calls we take from Lake Shore fall into three buckets: a gate that won’t open or close properly, a new gate that has to fit an existing drive, or a motor that whines, grinds, or simply stopped responding to the remote. Each of those is its own job with its own pricing, so we’ve given each one its own page.
Gate Repair in Lake Shore
Gate repair in Lake Shore usually means a sagging leaf, a hinge pulling loose from a rotting post, or a chain that jumped the track. Coastal corrosion accelerates all of it. We’ll tell you plainly whether the existing gate is worth saving or whether you’re better off replacing the leaf and keeping the posts. The written quote you get is the number you pay, and the repair carries a full-year guarantee. Gate Repair in Lake Shore
Gate Installation in Lake Shore
A new gate in Lake Shore has to match the grade of the drive, the setbacks from the street, and the swing room the existing landscaping actually allows. Steel and aluminum both hold up in the marine air, but the wrong powder coat will fade and chalk in a couple of seasons. We measure everything on site, give you a written price, and schedule the install around any HOA requirements. Gate Installation in Lake Shore
Gate Motor Repair in Lake Shore
Gate motors in this area fail most often from moisture getting into the board, limit switches that drift after years of slope-loading, and batteries that the marine air drains harder than the manual says they should. We do motor repair and full motor replacement on Viking, Ghost Controls, DoorKing, and Elite systems, among others. The diagnosis is a fixed price, and the repair quote is in writing before we touch anything. Gate Motor Repair in Lake Shore
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lake Shore
Our technicians work on the operators already installed on Lake Shore drives, including Viking, Ghost Controls, and DoorKing. We stock common boards, remotes, and safety-edge parts for these brands locally, so most motor repairs don’t wait on a parts order. For anything we don’t have on the truck, see our brands page for what we carry and how we source non-stock parts.
Pricing for Gate Company in Lake Shore, WA
| Service | Typical range in Lake Shore |
|---|---|
| Service call / diagnosis | $85 – $125 |
| Hinge replacement (pair) | $180 – $360 |
| Gate sag adjustment | $140 – $250 |
| Gate track repair | $220 – $450 |
| Limit switch adjustment | $110 – $190 |
| Circuit board replacement | $250 – $600 |
| Gate motor repair | $300 – $650 |
| Full gate motor replacement | $800 – $1,900 |
| Swing gate install (standard single leaf) | $2,400 – $5,500 |
| Sliding gate install | $3,500 – $8,000 |
| Safety edge / photo eye replacement | $180 – $380 |
Corrosion repair and slope-related work are the two things that push a Lake Shore quote toward the higher end of these ranges. Either way, the price we quote in writing is the price you pay. No number moves at the door.
Neighborhoods We Serve in Lake Shore
We cover the whole of Lake Shore, WA, from the waterfront lots to the streets that run back from the shore. Response time across the area is same-day for most repair calls, and we schedule installation work around a measured, written quote.
- Lakeshore
- Steilacoom
- Tillicum
- Camp Murray
- Oakbrook
Service Area – Cities Near Lake Shore
Our Lake Shore crews also cover nearby communities. We ship parts across Western Washington and dispatch technicians to surrounding cities, including Seattle, WA, Spokane, WA, Tacoma, WA, and Vancouver, WA. Scheduling is coordinated from our Seattle office while crews work locally in Lake Shore.
Serving Lake Shore, WA – Our Local Coverage Area
We’re based in the Lake Shore area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lake Shore
We answer the phone 24 hours a day, seven days a week, and we can usually dispatch a technician to Lake Shore the same day for a repair need. The diagnosis fee is quoted before we send anyone out, and the repair quote is written before work begins. Call (469) 530-2485.
Some Lake Shore communities with water access have HOA rules about gate height, material, and paint finish, and certain setback requirements apply near the shoreline. We’ll review what applies to your specific address during the site visit and build the quote around those limitations so nothing gets ordered that the HOA won’t approve.
Yes. Every Lake Shore gate job, whether repair or installation, includes checking the operator, safety edges, photo eyes, and the structural hardware as one system. If we find a motor issue while fixing a hinge, we’ll quote it as a separate line item so you know exactly what each part of the job costs before we do it.
For a free estimate on gate work in Lake Shore, call (469) 530-2485. A real person answers, every time.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Shore Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.