Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Kentfield, CA
Gate work in Kentfield runs into conditions most Bay Area towns don’t have: long driveways on grade, redwood-heavy lots, and gates that have been standing since the 1960s or earlier. Carver Gate Repair handles gate repair, gate installation, and gate motor repair across Kentfield with written prices delivered before any work starts and a full-year guarantee on every repair. If a gate won’t open at 7 a.m. and you need it fixed before the school run, call (469) 530-2485 and a live person picks up.
Why Kentfield Homes Are Different
Kentfield sits along the Corte Madera Creek corridor, and that changes how gates age. Morning fog and damp winters push rust into hinge posts and operator housings faster than in drier parts of Marin. Many Kentfield properties are older estates with masonry pillars, long posts set in concrete, and gate frames built from steel or redwood that was never primed for decades of moisture. When a post begins to lean, it is usually not the gate that failed first. It is what the post is set in.
We also see a lot of gates on sloping driveways. A gate that hangs or drags on a Kentfield hillside is often a geometry problem, not just a hinge problem. In the flats near the creek and around College Avenue, gates sit closer to the street and get opened more often, so motor duty cycles matter. In the hill sections off Sir Francis Drake Boulevard, a gate may run a longer arm or need a different operator than a flat-lot gate. We account for both before we quote, because a motor sized wrong for a slope fails early, and the written quote should reflect what actually fixes the job.
Our Main Kentfield Services
Most Kentfield calls come in for one of two problems: a gate that stopped moving, or a motor that runs but will not open the gate. Both have their own pages with local pricing and what the job involves.
Gate Repair in Kentfield
Gate repair here usually starts with the hinge, the post, or the operator arm. On older Kentfield gates, we routinely find hinge bolts that have wallowed out, posts that have settled, and receivers that no longer read the remote because moisture got inside the box. The job is to figure out which of those failed first, not just weld it back and leave. We give a written price for the actual repair before work starts. Details on Gate Repair in Kentfield cover what we fix and what it costs.
Gate Installation in Kentfield
A new gate in Kentfield has to fit the existing grade, the existing pillars, and the way the driveway actually drains. We measure and order to spec rather than forcing a stock panel onto a site that was built sixty years ago. That means working with the slope, the frost line, and the gate weight, then building the frame so the operator does not strain from day one. See Gate Installation in Kentfield for what a full install includes and how we price it.
Gate Motor Repair in Kentfield
Motor failures show up differently here than they do inland. In Kentfield’s damp air, limit switch contacts and control boards corrode before the motor windings themselves go, and loop detectors near the creek can false-trigger after a wet week. We bench-test the board, check the limit travel, and replace only what failed. The Gate Motor Repair in Kentfield page covers motor replacement costs and which brands we service.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kentfield
We work on the operators already installed on Kentfield gates, including LiftMaster, Viking, Ghost Controls, and FAAC equipment. Matching the right parts to the existing system matters more than the brand name on the box. Our technicians stock common boards, remotes, and limit switches locally, which shortens turnaround on most calls. See our brands for the full list we service.
Pricing for Gate Company in Kentfield, CA
Kentfield gate pricing follows the job, not a one-size price sheet. The table below shows what we typically see across Kentfield and Marin County, with ranges that reflect the work as it actually comes in. Every customer gets a written price before any work starts, so the number on the quote is the number on the invoice.
| Service | Typical range in Kentfield |
|---|---|
| Gate repair (minor, hinge/alignment) | $180 – $340 |
| Gate repair (major, weld/frame/post) | $400 – $900 |
| Gate motor replacement | $850 – $1,600 |
| Gate motor repair (board/limit switch) | $225 – $450 |
| Driveway gate opener install | $1,200 – $2,400 |
| New gate installation (standard swing) | $1,800 – $4,200 |
| New gate installation (custom/heavy) | $4,500 – $8,000+ |
| Remote/programming | $60 – $180 |
| Safety sensor/loop detector replacement | $300 – $700 |
In Kentfield, the price climbs when a gate is heavy, a post needs resetting, or the driveway is steep and the operator has to work harder. We quote the job, not a flat menu, and the price is fixed before we touch a bolt.
Neighborhoods We Serve in Kentfield
We run calls across Kentfield and the surrounding area. Response time is typically same day for urgent gate failures, with a scheduled window for installs and non-emergency work. Some neighborhoods we cover regularly:
- Kentfield proper (along College Avenue and Sir Francis Drake Boulevard)
- Kent Woodlands and the hills above Kentfield
- Ross Valley border areas
- Lower Kentfield near the creek
- West Kentfield toward Greenbrae
Service Area – Cities Near Kentfield
Our Kentfield crews also cover nearby Marin towns, including Larkspur, CA, San Anselmo, CA, San Rafael, CA, and Corte Madera, CA. If your gate sits in one of these areas, we can dispatch a technician who knows the local terrain and gate stock, and the same written-price and guarantee terms apply.
Serving Kentfield, CA – Our Local Coverage Area
We’re based in the Kentfield area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kentfield
We dispatch same day for urgent gate failures in Kentfield. If a gate is stuck open or closed and you cannot secure the property, call (469) 530-2485 and give us the address. A live person answers around the clock, and we triage the call from there.
Some Kentfield properties fall under specific HOA or building codes, particularly for new gate installations on street-facing entries. We do not file permits, but we will tell you if your job looks like one that needs them before a quote is written, so you can plan the timeline realistically.
Yes. We still service older operators and carry parts for major brands, including niche boards and remotes. If the motor is too far gone to repair safely, we will tell you that plainly and give a written replacement price before any work begins.
Contact Carver Gate Repair for a free estimate: call (469) 530-2485 and a live person answers. We serve Kentfield with written prices, background-checked technicians, and a one-year guarantee on every repair. The price is quoted and agreed before any work starts, so the number never moves at the door.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kentfield Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.