Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Normandy Park, WA
Gate work in Normandy Park, WA follows the lay of the land: steep driveways, older homes on generous lots, and salt air moving up from Puget Sound. Carver Gate Repair handles the full scope here, from a swing gate that’s sagged off its hinges to a slide operator that won’t respond to the remote. We dispatch background-checked, uniformed technicians who quote a written price before any work starts and back every repair with a written guarantee good for a full year. If your gate is down, call (469) 530-2485 and a live person answers.
Why Normandy Park Homes Are Different
Normandy Park sits on a bluff above the Sound, and that geography shapes the gate work we do. Many properties run on sloped or terraced lots, which means gate posts take more lateral load than they would on flat ground. A gate that swings fine for a decade on a level Seattle street will lean and bind on a Normandy Park grade if the post footings weren’t oversized for the slope. We account for that on every repair call and every new install.
The housing stock here skews older – mid-century ranches and custom builds from the 1960s and 70s are common, often set back from the street with long driveway runs. That means the gate is frequently the first physical thing a visitor touches, and it’s also the first thing a homeowner notices failing. Corrosion is a real factor this close to salt water. Hinges, track rollers, and exposed motor housings age faster in Normandy Park than they do inland, and we regularly replace hardware that’s rusted through well before the gate itself is worn out.
Permit reality matters too. Most straightforward gate repairs in Normandy Park don’t require a permit, but new installations and significant motor upgrades can trigger city review depending on setback and height. We handle that conversation plainly: if your job needs a permit, we tell you before work begins, and we factor the timeline into the schedule rather than discovering it mid-project.
Our Main Normandy Park Services
Most Normandy Park calls to us fall into three buckets: a gate that won’t open, a gate that needs to be replaced, or a motor that’s stopped doing its job. Each has its own page with full detail.
Gate Repair in Normandy Park
Repair calls in Normandy Park usually start with a gate that’s dragging, binding, or refusing to latch. On sloped lots, the first casualty is almost always the hinge line: the gate drops a fraction of an inch, the latch misses the striker, and the whole thing starts fighting itself. We weld, shim, or replace hinges as the job requires, then re-square the gate so it swings clean. One regularly seen repair here is rusted hardware on gates that face the Sound’s salt air. Details on typical repair work are on our Gate Repair in Normandy Park page.
Gate Installation in Normandy Park
A new gate in Normandy Park has to be built for the grade. We measure the slope, set posts deeper than code minimum where the soil is soft, and choose hardware rated for coastal exposure. Homeowners here tend to favor steel and aluminum frames with wood or composite infill, matched to the style of the house. Every installation includes a written price before we order materials, and we walk the site with you to confirm post locations and swing direction before anything goes in the ground. See Gate Installation in Normandy Park for the full breakdown.
Gate Motor Repair in Normandy Park
When a motor fails in Normandy Park, it’s usually one of three things: a limit switch that lost its setting, a control board fried by moisture, or a gearbox grinding itself down. We open the housing, diagnose on-site, and give you a written price to fix it before we turn a wrench. Our technicians work on FAAC, BFT, Linear, and Viking motors among others, so the parts conversation is grounded in what’s actually on your gate. The full motor story is on our Gate Motor Repair in Normandy Park page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Normandy Park
We service FAAC, BFT, Linear, and Viking gate motors in Normandy Park, among others. Our trucks carry common control boards, limit switches, and remote transmitters for these brands, which means many motor repairs finish on the first visit. See our brands for the full list and what we stock.
Pricing for Gate Company in Normandy Park, WA
| Service | Typical range in Normandy Park |
|---|---|
| Hinge replacement (single gate) | $180 – $340 |
| Gate re-welding / cracked frame repair | $200 – $450 |
| Post replacement or reset | $350 – $800 |
| Gate track repair or replacement | $250 – $650 |
| New single swing gate | $1,800 – $4,500 |
| New slide gate | $2,500 – $6,500 |
| Motor replacement (standard swing) | $800 – $1,800 |
| Motor replacement (slide operator) | $900 – $2,200 |
| Control board replacement | $300 – $750 |
| Limit switch replacement | $150 – $350 |
| Remote / keypad programming | $75 – $200 |
| Full system diagnostic | $95 – $180 |
Two things push Normandy Park pricing above the flatland baseline: slope and salt. A post replacement on a 20-degree grade costs more than the same job on level ground because the footing has to be deeper and the concrete work takes longer. Coastal corrosion also means we sometimes replace hardware and the mounting plate together, not just the part that failed. Whatever the number, you get it in writing before work begins. The price does not move at the door.
Neighborhoods We Serve in Normandy Park
We cover all of Normandy Park, from the waterfront properties along Marine View Drive up to the newer builds near the top of the bluff. Our service area includes every residential pocket in the city.
- The Cove
- Marine View Drive corridor
- Manhattan area
- Normandy Terrace
- Shorewood on the Sound
Typical response time in Normandy Park for a non-emergency repair is same-day or next-day, depending on the time of the call. Emergency calls get a live person on the phone immediately and a technician dispatched as soon as one is available.
Service Area – Cities Near Normandy Park
Our Normandy Park crews also cover nearby communities across the metro area. We serve Seattle, WA to the north, Tacoma, WA to the south, and Vancouver, WA further down the corridor. On the east side, we reach Spokane, WA through our dispatch network. If you’re not sure whether your address falls in our service map, call and ask – a person will answer.
Serving Normandy Park, WA – Our Local Coverage Area
We’re based in the Normandy Park area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Normandy Park
Most non-emergency repair calls in Normandy Park are scheduled same-day or next-day. If a gate is stuck open, a motor is smoking, or a gate has come off its track and is blocking a car, call (469) 530-2485. A live person answers around the clock and will dispatch the nearest available technician immediately.
Most gate repairs in Normandy Park do not require a permit. New installations or significant motor upgrades can trigger city review depending on set back, height, and whether the gate crosses a public right-of-way. We identify the permit requirement before work starts and include it in the written price. The schedule accounts for city review time, so there are no mid-project surprises.
Every repair from Carver Gate Repair carries a written guarantee good for a full year from the date of service. If the repair fails inside that window, we return and make it right at no charge. No argument, no re-quote, no second invoice. That guarantee is printed on the paperwork you receive before work begins.
If you need a gate looked at in Normandy Park, WA, call (469) 530-2485. We’ll get you scheduled, give you a written price, and handle the rest.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Normandy Park Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.