Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Haslet, TX
Carver Gate Repair handles gate work across Haslet, TX, and we’re the crew homeowners call when a gate stops closing, a motor burns out, or a new gate has to go in on a sloping lot. Haslet’s mix of newer subdivisions and larger acreage properties means the jobs vary a lot: some gates hang on brick columns, others on steel posts sunk into clay, and some sit at the end of long gravel drives with no power nearby. Every job starts with a written price before any work begins. Call us at (469) 530-2485 and a live person answers, day or night.
Why Haslet Homes Are Different
Haslet sits on the northern edge of the Fort Worth sprawl, and the housing stock reflects that. Newer neighborhoods like Sendera Ranch, Northstar, and Caraway pack homes fairly tight, with ornamental steel gates on two-car driveways and HOA rules that dictate height, color, and style. Then there are the older properties along Avondale Haslet Road and Blue Mound Road, where the gates are bigger, heavier, and often custom-built years ago with parts that aren’t made anymore. The soil here is expansive clay, and it shifts. Gate posts that looked plumb five years ago lean after a few wet springs and dry summers, and that misalignment is the start of most mechanical failures we see in Haslet.
Heat matters too. Summers push 100 degrees for weeks, and gate motors mounted in direct sun on west-facing drives run hot. Capacitors and control boards fail earlier here than they do in milder climates. When we repair a gate in Haslet, we check the post base, the hinge alignment, and the motor temperature range, not just the part that broke. A repair that ignores the local conditions won’t hold.
Our Main Haslet Services
Most Haslet calls fall into two buckets: a gate that stopped working and a motor that won’t respond. Here’s what each job looks like, and a link to the dedicated Haslet page for full detail.
Gate Repair in Haslet
A sagging gate in Haslet usually comes back to post movement in clay soil or a broken hinge weld on a heavy steel leaf. We repair the alignment, replace worn rollers and hinges, and rehang the gate so it swings or slides true. For Gate Repair in Haslet, we carry the common hinge sizes, roller assemblies, and latch hardware on the truck, so most repair jobs finish in one visit. Written guarantee on every repair, good for a full year.
Gate Installation in Haslet
New gate installations in Haslet have to account for post depth, soil movement, and HOA approval. We set posts below the frost line and concrete them against the clay shift, then hang the gate and test it manually before any opener goes on. See Gate Installation in Haslet for the full scope: drive gates, pedestrian gates, and ranch-style gates on acreage lots. Every install includes a written price agreed before materials are ordered.
Gate Motor Repair in Haslet
When a gate motor quits in Haslet, it’s usually the capacitor, the limit switch, or a gear stripped from binding against a misaligned gate. We diagnose the motor and the gate together, because fixing one without checking the other means a repeat failure. Our technicians work on Gate Motor Repair in Haslet across swing and slide operators, including solar-powered setups common on Haslet acreage lots. Most motor repairs are same-day once we’re on site.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Haslet
Our Haslet trucks carry parts for Linear, Viking, and DoorKing operators, plus Ghost Controls kits for solar and battery-powered gates. Common control boards and limit switches for these brands are stocked locally, which means most motor repairs in Haslet finish same-day rather than waiting on a part to ship. For the full list of equipment we work on, see our brands.
Pricing for Gate Company in Haslet, TX
| Service | Typical range in Haslet |
|---|---|
| Gate repair diagnostic and minor adjustment | $125 – $275 |
| Hinge or roller replacement (one side) | $180 – $400 |
| Gate realignment and rehang | $300 – $650 |
| Welded steel gate repair (cracked frame or post) | $250 – $800 |
| Gate motor diagnostic (swing or slide) | $150 – $300 |
| Swing gate operator replacement (single arm) | $850 – $1,800 |
| Slide gate motor replacement | $1,000 – $2,200 |
| Limit switch replacement | $150 – $350 |
| Loop detector install or replacement | $250 – $600 |
| Solar gate motor kit (panel, battery, controller) | $1,200 – $2,800 |
| New gate installation (standard single drive, steel) | $1,500 – $4,000 |
| Custom gate installation (acreage or double swing) | $3,500 – $9,000 |
Prices in Haslet push toward the higher end when a gate is oversized, heavily ornamented, or when the electrical run from the house to the gate is long. The number we quote is the number you pay; it’s written down before work starts, and it doesn’t move at the door.
Neighborhoods We Serve in Haslet
We run calls across Haslet every week, from the planned subdivisions to the acreage lots where driveways run a few hundred feet. Typical response for Haslet is same-day or next morning, depending on when you call.
- Sendera Ranch
- Northstar
- Caraway
- Bridle Ridge
- Acreage properties off Avondale Haslet Road and Blue Mound Road
Service Area – Cities Near Haslet
Carver Gate Repair dispatches to Haslet from our Dallas-Fort Worth metro office, and we also cover the surrounding communities. If you’re in Keller, TX, Roanoke, TX, Newark, TX, or North Richland Hills, TX, the same crew standard applies: written price first, background-checked technician, guarantee in writing.
Serving Haslet, TX – Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Haslet
Most Haslet calls are answered by a live person at (469) 530-2485 and scheduled for same-day or next-morning arrival. Emergency calls where a gate is stuck open or blocking a driveway get priority. We’ll give you a firm arrival window when you call.
In neighborhoods like Sendera Ranch or Northstar, HOA covenants often set rules for gate height, color, and style. We recommend checking with your HOA board before installation. We’ll work from the approved specs and can note the requirements on your written quote.
We cover the full Haslet area, including the subdivisions, the older streets around the city center, and acreage lots outside the main residential blocks. One phone number, (469) 530-2485, schedules everything. If your gate is off a paved road, tell the dispatcher so we bring the right truck.
For a written, upfront price on any gate job in Haslet, call (469) 530-2485. A real person picks up, and estimates are free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Haslet Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.