Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Mayfair, CA
Carver Gate Repair is the home gate company Mayfair homeowners call when a gate stops opening, starts drifting, or hangs crooked after years of use. We repair, install, and service gate motors across Mayfair, with written prices before any work begins and a full-year guarantee on every repair. If your gate is off its track or the motor hums without moving, call (469) 530-2485 and a live person will pick up.
Why Mayfair Homes Are Different
Mayfair sits in a part of Los Angeles where homes were built for a different climate than the one we actually live in. Gates here face two things most suburbs don’t: heavy morning marine air that settles on metal hardware, and a wide swing in temperature between cool nights and hot afternoons. That repeated expansion and contraction is hard on hinges, weld points, and motor mounts. We regularly see gate posts that have pulled slightly out of alignment because the surrounding soil in Mayfair shifts with the rainy season, then dries out and settles again. It doesn’t take much movement to make a swing gate bind or a slide gate scrape.
Most Mayfair gates are swing-type on residential properties, often running a Linear or Ghost Controls operator. The gate itself may be ornamental iron or a mix of steel frame and wood slats. Both carry weight differently, and a motor sized for one will strain under the other. Rental expectations and HOA rules vary block to block, but the practical reality is the same: gates here tend to fail on the motor first, the hinges second, and the control board third. That order shapes how we approach diagnostics.
Our Main Mayfair Services
These are the two jobs Mayfair homeowners call about most, plus motor work that usually sits behind both.
Gate Repair in Mayfair
Most repair calls start the same way: the gate was fine until it wasn’t. A hinge sheared, a wheel jumped its guide, or the gate now drags across the concrete. In Mayfair, we look first at alignment and weight distribution, because the soil movement we described above slowly changes how the gate sits. Gate Repair in Mayfair covers everything from re-hanging a sagging gate to replacing hinges, wheels, and track, with a written price before any work starts.
Gate Installation in Mayfair
A new gate in Mayfair has to be sized for the opening, the operator, and the way the ground drains. We measure for swing clearance and account for the slope of the driveway or walk, because a gate that clears today can scrape in a wet winter. Gate Installation in Mayfair covers the full run: gate, posts, hinges, operator, and the safety edges and controls wired in. Every install gets a written price before we order material.
Gate Motor Repair in Mayfair
When the motor runs but the gate doesn’t move, or the gate opens on its own at 3 a.m., the problem is usually the operator. Common Mayfair failures include limit switches that lost their setting, a loop detector that no longer senses a car pulling up, or a capacitor that gave out in the heat. Gate Motor Repair in Mayfair covers diagnostics and repair on the operators we service, including Viking and DoorKing. We bring common parts on the truck so the job usually finishes in one visit.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Mayfair
We work on our brands including Linear, Viking, Ghost Controls, and DoorKing. Common boards, remotes, and limit switches for these units are stocked on our trucks, which keeps most Mayfair motor repairs to a single visit.
Pricing for Gate Company in Mayfair, CA
| Service | Typical range in Mayfair |
|---|---|
| Gate repair service call and diagnosis | $85 – $150 |
| Hinge replacement (per hinge) | $60 – $150 |
| Gate wheel or roller replacement | $80 – $180 per wheel |
| Gate track repair or realignment | $150 – $400 |
| Swing gate operator motor replacement | $650 – $1,250 |
| Slide gate motor replacement | $800 – $1,500 |
| Control board replacement | $250 – $650 |
| Remote or keypad programming | $65 – $140 |
| Loop detector replacement | $250 – $500 |
| Safety sensor or photo-eye repair | $150 – $350 |
| Full gate installation (single swing) | $2,200 – $5,500 |
| Full gate installation (slide) | $3,500 – $8,000 |
Prices in Mayfair push toward the higher end when a gate is heavy ornamental iron, when the track has been out of alignment long enough to wear the wheels unevenly, or when the motor has to be replaced rather than repaired. Every Mayfair job gets a written price before work starts, so the number doesn’t move at the door.
Neighborhoods We Serve in Mayfair
We run calls across Mayfair and the streets around it. Most repairs are reached the same day, and installation work is scheduled around material lead times, not around a crew’s convenience.
- Southeast Mayfair, near Mayfair Park
- West Mayfair, along the 710 corridor
- North Mayfair, near the LA River channel
- South Mayfair, below South Street
- East Mayfair, up toward Bell
Service Area – Cities Near Mayfair
While this page is built for Mayfair, our crews also run calls into Los Angeles, CA and across the broader region, including San Diego, CA, San Jose, CA, and San Francisco, CA. Scheduling and dispatch run from our Los Angeles office, and a live person answers the phone at (469) 530-2485.
Serving Mayfair, CA – Our Local Coverage Area
We’re based in the Mayfair area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mayfair
Most Mayfair repair calls are reached the same day. A live person answers the phone around the clock, and Lonnie Burke’s crew runs a tight dispatch schedule so a technician arrives, diagnoses the problem, and hands you a written price before any work starts.
It depends on the scope. Replacing an existing gate on the same posts usually doesn’t require a permit, but changing the footprint, adding a new operator, or running fresh power may. We’ll tell you what Mayfair requires on the quote, not after the job is open.
Every repair carries a written 365-Day Done Right Promise. If the same repair fails within the guarantee window, we return and fix it at no charge. The guarantee is in writing, on the invoice, every time.
For a free estimate on gate repair, installation, or motor work in Mayfair, call (469) 530-2485. A live person answers, a background-checked technician shows up in uniform, and the written price comes before any tool touches the gate. That’s the Garrison Standard, and it’s how we work in Mayfair every day.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mayfair Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.