Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Jose, CA
When a gate stops opening in San Jose, it usually happens at the worst time: before work, after dark, or a day before you’re leaving town. We’re Carver Gate Repair, and we fix, install, and rebuild gates across San Jose with written prices and a one-year guarantee on every repair. San Jose’s mix of older Willow Glen estates, newer hillside builds in Almaden, and downtown properties with tight setbacks means gate systems here see different stress than almost anywhere else in the Bay Area. Call (469) 530-2485 and a live person answers, day or night.
Why San Jose Homes Are Different
San Jose stretches across a valley floor and up into the eastern foothills, and that geography shows up in the gate work we do. Properties in Silver Creek and Evergreen sit on sloped driveways, which puts constant backpressure on swing operators and hinge hardware. A gate that’s slightly out of level on flat ground becomes a real problem on a 6-degree grade, and we see exactly that on hillside lots throughout East San Jose.
The housing stock matters too. Many San Jose neighborhoods were built in the 1950s through 1970s, and gates from that era often run on motors that are decades old, with originals from Linear or Viking. Meanwhile, newer communities in North San Jose and Berryessa tend to have FAAC or BFT systems installed by the builder. Knowing which generation of equipment is on which side of town helps us stock the right parts before we arrive. San Jose’s dry summers also bake exposed gate control boards, while winter rains work on rust at the base of steel posts. Both show up in service calls, and both are familiar to our technicians.
Our Main San Jose Services
Most San Jose homeowners call us for one of three things: a gate that won’t move, a motor that’s making noise or dead, or a full replacement. Each has its own dedicated page with local pricing and service details.
Gate Repair in San Jose
Gate repair in San Jose typically means diagnosing why the gate stopped doing its job: a broken hinge, a seized wheel, a bent track, or a failing operator. On older San Jose properties, we often find the original steel hardware has fatigued after 40-plus years of daily cycles. We replace what’s failed, quote the price in writing, and back the work for a full year. View the full breakdown at Gate Repair in San Jose.
Gate Installation in San Jose
New gate installation across San Jose starts with the driveway itself: its width, slope, and clearance. We measure, order, and schedule each job, which means no same-day scramble and no surprise change orders. Whether it’s a steel driveway gate for a Willow Glen property or an aluminum pedestrian gate for a downtown lot, the install is planned and the price is fixed before the first cut. Details are on the Gate Installation in San Jose page.
Gate Motor Repair in San Jose
Gate motor repair covers the operator, the control board, and the sensors that tell the gate when to stop and reverse. San Jose’s heat and occasional power surges shorten board life on exposed systems, and we carry replacements for nine major brands. If your gate opens but won’t close, or the motor hums without moving the gate, that’s a motor call. See typical San Jose motor repair costs on Gate Motor Repair in San Jose.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Jose
Our San Jose technicians carry parts for the systems already installed across this market: FAAC, BFT, Linear, and Viking, along with LiftMaster, Ghost Controls, and four others. Most motor repairs are completed on the first visit because the common boards, limit switches, and arms are in our local van stock. See the full list on our brands.
Pricing for Gate Company in San Jose, CA
| Service | Typical range in San Jose |
|---|---|
| Wrought iron or steel gate repair | $350 – $1,100 |
| Automatic gate repair | $400 – $1,300 |
| Gate motor replacement | $900 – $2,000 |
| Gate operator replacement | $1,200 – $2,500 |
| Gate hinge repair or replacement | $200 – $500 |
| Gate wheel or roller replacement | $200 – $450 |
| Limit switch replacement | $150 – $350 |
| Loop detector replacement | $250 – $600 |
| Gate cable or chain replacement | $200 – $500 |
| Gate control board replacement | $350 – $800 |
Hillside lots in Silver Creek and the east foothills push toward the higher end of these ranges: gravity is working against the hardware on every cycle. Regardless of what the job costs, you’ll have the full price in writing before work begins, and that number is the number you pay.
Neighborhoods We Serve in San Jose
Our crews cover the full San Jose city boundary, from the downtown core through the east foothills to the western edges. We schedule by neighborhood clusters so the drive time stays predictable.
- Almaden Valley
- Willow Glen
- Silver Creek
- Evergreen
- Berryessa
Most San Jose neighborhoods are reachable the same day or next morning for emergency gate repair calls.
Service Area – Cities Near San Jose
For gate work just outside San Jose, we also serve the surrounding communities. Homeowners in Milpitas, CA and Santa Clara, CA receive the same written pricing and one-year guarantee. We also help clients in Sunnyvale, TX and Campbell, FL when their property brings them to the Bay Area for service or installation needs.
Serving San Jose, CA – Our Local Coverage Area
We’re based in the San Jose area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Jose
Most San Jose calls are answered by a live person immediately, and emergency gate repairs are typically dispatched the same day or next morning. We schedule by neighborhood cluster across San Jose, so the technician’s drive time stays short and predictable.
Many San Jose gate repairs don’t require a permit, but installations with new footings or electrical runs sometimes do, depending on scope and location. We’ll tell you if your job needs one and what the process looks like before any work begins.
We cover the full city of San Jose, including Almaden Valley, Willow Glen, Silver Creek, Evergreen, Berryessa, and downtown. If you’re near the city boundary, call (469) 530-2485 and we’ll confirm coverage within one call.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Jose Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.