Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Crowley
A new gate in Crowley starts with the right plan for the soil, the posts, and the operator. Most installs we correct in Crowley fail because posts were set too shallow for the black clay that runs through this part of the Chisholm Trail corridor, or because the automatic system was wired but never properly tested under load. If you’re looking for Gate Installation done once and done right, call Carver Gate Repair at (469) 530-2485. We work to The Garrison Standard: a written price before any work starts, a background-checked and uniformed technician on site, and a written one-year guarantee on the work.
We serve Crowley directly from our Dallas-Fort Worth dispatch office, so you’re not waiting on a crew from across the metro. Our technicians know the streets off FM 1187, the neighborhoods around Crowley High School, and the newer developments along the Chisholm Trail Parkway. That local knowledge matters when a gate has to clear a drainage swale or hold square on shifting clay.
Why Carver Gate Repair Is Crowley’s Preferred Gate Installation Company
Crowley homeowners tend to call us after a gate has already failed once. That’s not a knock on the town; it’s the reality of clay soil and the number of generalist contractors who treat a gate like a fence panel that happens to swing. We hear the same story along Main Street, in the Deer Creek addition, and out toward Bicentennial Park: the gate dragged for a season, the opener started grinding, and then someone showed up, quoted a number, and the price moved once the concrete was open. We don’t work that way.
The written price we hand you before any work starts is the price. Full stop. That’s The Garrison Standard, and it’s been in place since 2008 across the Garrison Partners family. For gate installation in Crowley, that means you know what the footings, the post, the gate frame, the operator, and the safety testing will cost before our crew breaks ground. Lonnie Burke leads our operation, and he holds every technician to the same discipline on every job: show up when scheduled, work clean, test everything, and leave the gate safer than we found it.
Our phones are answered by a live person, 24 hours a day, every day of the year. That’s not a call center that routes you to a voicemail box. When a Crowley homeowner calls at 6 p.m. on a Saturday because a gate collapsed onto the driveway, a real person picks up and starts scheduling.
Gate Fabrication in Crowley
Gate Fabrication in Crowley is what we pull in when the off-the-shelf panel won’t match the driveway, the slope, or the look of the house. It means an operator and a steel frame built to your measurements, not a kit pulled from a rack. In the older parts of Crowley around the historic downtown and along the farm roads heading east, driveway widths and setbacks vary enough that a stock double gate often leaves a gap or won’t carry the swing arc a slope demands. Fabrication solves that.
Give a range for this work in Crowley: a fabricated single driveway gate with a basic steel frame and standard hinges typically lands between $2,800 and $6,500 installed, depending on height, powder coating, and whether you want an operator added at the same time. The price we quote is written, line-itemed, and agreed before any steel is cut.
Built for the soil it sits in
A fabricated gate only works if the posts are sized and set for what’s under them. For a sliding gate on Crowley clay, we spec footings two to three feet deep and often wider than the post manufacturer’s minimum. That’s not overbuilding; it’s what keeps the gate from binding in the spring.
Fabrication with the operator in mind
If you know you’ll add an automatic opener later, tell us at the quote stage. We’ll build the gate frame lighter where it matters, add internal reinforcement for the operator mount, and leave conduit sleeves for low-voltage wiring. It’s cheaper to do it now than to cut into a finished gate in two years.
Automatic Gate Installation in Crowley
Automatic Gate Installation in Crowley means more than bolting an arm to a post. The full job includes the operator, the safety photocell or contact edge, the loop detector or keypad, and the testing that proves the gate reverses when it should. Under UL 325, the accepted safety standard for automatic gates, a gate that hasn’t been tested for reversal force is an entrapment hazard. Our crews test every install, on site, with the gate under load, before we call the job done.
Expect a typical automatic gate installation in Crowley to run $3,200 to $8,500, with the spread driven by whether you already have power at the gate, whether you choose a slide or swing operator, and which brand you’re installing. A slide gate operator with a linear rack and loop detector lands higher than a basic solar swing operator. We’ll explain the difference in plain English and hand you a written quote before anything is ordered.
Wired, not just mounted
The most dangerous gate install we get called to fix is one where the photocell is wired but never tested. The wiring looks right. The gate opens. Then a car’s bumper or a child’s bike trips the sensor and nothing reverses. On every automatic install in Crowley, we test the photocell, the edge sensor if one is spec’d, and the motor’s reversal under resistance. Written guarantee on the whole install, good for a full year.
Power where there is none
Plenty of Crowley lots, especially the acreage properties east of town and off Old Granbury Road, don’t have a 120V line anywhere near the gate. We handle that two ways: run a dedicated circuit from the house with proper conduit and burial depth, or spec a solar package sized to the operator. Solar works well for a swing gate that cycles a few dozen times a day; a busy slide gate on a multi-car property usually justifies the cost of the power run. We’ll price both options.
Trusted Brands We Service in Crowley
We install and service gate operators from FAAC, BFT, Linear, and Viking, alongside LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Crowley customers, we keep common swing arms, control boards, loop detectors, and photocells on the truck, which means an operator we diagnose on a Tuesday can often be replaced that same week without waiting on a distributor shipment. If your existing operator is a FAAC that’s eating shear pins or a Linear that won’t read the remote after a storm, our technicians have been trained on that exact system and carry the parts to match. No adapting a generic board and hoping it holds.
Common Gate Installation Problems We See in Crowley Homes
- Posts set too shallow for expansive clay. This is the single biggest install failure in Crowley. The clay swells in the wet months and shrinks in the dry ones, and a post set 18 to 24 inches deep will heave upward, tilting the hinge post and dragging the gate. Once the gate drags, the operator works harder, overheats, and trips its thermal limit.
- Slide gates that go in level in August and bind by April. A slide gate’s track or rack-and-pinion drive can be installed perfectly level on a dry summer day. After the first heavy rain, the clay underneath swells unevenly and the gate binds mid-travel. Our slide gate installs in Crowley include deeper, wider footings under the track and leveling adjustments written into the service plan.
- Safety sensors wired but never tested under load. We see lots of automatic gate installs in Crowley where the photocell is wired into the circuit and the installer checks the green light, but never actually cycles the gate against a resistance test. That’s the difference between an inconvenience and an entrapment hazard. We test every reversal on every install.
- Double gates that never close square. A double swing gate looks great on a quote sheet but needs both leaves matched, the center stop set properly, and the opening adjusted for the crown of the driveway. On Crowley driveways that slope toward the street for drainage, we set the leaf hinges at slightly different heights so the gate opens without scraping and closes without leaving a gap at the center.
Pricing for Gate Installation in Crowley, TX
For a standard single swing gate in Crowley, installed with a basic steel frame and powder coating, plan on roughly $2,200 to $5,200. A double driveway gate starts around $4,800 and climbs to $9,500 depending on width, ornamental detail, and whether it’s automatic. Slide gates in Crowley run $5,500 to $11,000 because the track, the rack, and the footings all have to be built for clay soil that moves. An automatic operator added to an existing gate is typically $1,800 to $4,300 with safety sensors and testing included. A fabricated custom gate is its own line item, and we price it after we measure, never before. Every quote is free, written, and good for 30 days. Call (469) 530-2485 and we’ll send a technician to measure and price your gate without any obligation.
We Also Serve Cities Near Crowley
While this page is focused on Gate Installation in Crowley, our crews also handle gate work in Burleson, Joshua, Kennedale, and Arlington. If you’re a few miles outside town limits or your property straddles a county line, call us and we’ll tell you straight whether we can get a crew to you and when. The same written pricing and one-year guarantee apply.
Serving Crowley, TX – Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Crowley
Because most installers set them too shallow for the black clay that dominates the Chisholm Trail corridor. Crowley’s clay soil expands when wet and contracts when dry, which heaves posts upward over one or two season cycles. A hinge post that heaves throws the gate out of square, the leaf starts dragging, and the operator motor strains until it fails. We set Crowley gate posts below the active clay layer and often spec wider footings than the manufacturer’s minimum for exactly that reason.
An automatic gate installation done right includes the operator, the safety photocell or contact edge, a loop detector or keypad for entry, the low-voltage wiring, and a full reversal and entrapment test under the UL 325 standard. Without that test, the gate isn’t safe to operate. We also confirm the gate itself is hung square and moving freely before any automation goes on, because an operator can’t compensate for a gate that’s already bound up. Call (469) 530-2485 for a free quote on a full install.
No, and you shouldn’t want us to. Gate installation involves concrete footings that need time to cure before the post is loaded, plus wire runs and operator programming. A same-day gate install means someone is cutting corners on the cure time or the footings. What we can do is get a technician to your property quickly, measure everything, and deliver a written quote on the spot. Then we schedule the install with the time the job actually needs. Call us and we’ll work out the right timeline for your gate.
It depends on how far the gate is from your panel, how often the gate cycles, and whether you’re on a city lot in Crowley or an acreage property east beyond the city limits. Solar works well for a single swing gate on a residential lot with moderate use. For a dual slide gate that opens a dozen times a day or more, we usually recommend running a dedicated circuit. We’ll price both paths and you decide. Call (469) 530-2485 and ask for the solar-versus-power comparison on your exact property.
We install and service operators from FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Nine brands, one standard of work. That matters in Crowley because the right brand for your gate depends on the gate’s weight, the cycle count, and the soil your posts sit in. We’ll match the operator to the gate and the site, not the other way around. Estimates are free; call (469) 530-2485.
Call Carver Gate Repair for Gate Installation in Crowley
If your gate is dragging, sagging, or you’re starting fresh with a new install, call (469) 530-2485. We’ll put you on the phone with a live person, schedule a technician to come measure and quote, and hand you a written price before any work starts. The one-year guarantee is in writing. The price doesn’t move. The crew shows up background-checked, uniformed, and ready to work. That’s the only way we’ve done it since 2008.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Crowley homeowners with gate installation and repair built to The Garrison Standard.