Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Dallas
A new gate installation in Dallas runs from about $2,800 for a basic single swing gate up to $14,000 or more for a long sliding driveway gate with an operator, safety edges, and a loop detector, and most jobs are scheduled within one to two weeks, not same day. We are Carver Gate Repair, and we work exclusively on gates and gate motors across the Dallas metro, including the Park Cities, Lakewood, and Preston Hollow. If you are tired of contractors who treat gate work as an afterthought, call (469) 530-2485 and you will get a live person, a written price before any work starts, and a full-year guarantee on the installation.
Why Carver Gate Repair Is Dallas’s Preferred Gate Installation Company
Dallas homeowners have a specific frustration with gate contractors: the quote changes at the door, the crew never shows, and when the gate sags six months later, nobody answers the phone. We built Carver Gate Repair around the opposite of that. Every installation starts with a written price, delivered before the first hole is dug, so the number does not move once the work begins. The technician who arrives at your Dallas home is background-checked, uniformed, and trained on the gate system already on your property, not a general handyman figuring it out as he goes.
Our crews work in Dallas neighborhoods every week, from East Dallas to Oak Cliff to Far North Dallas, so we know the clay soil, the property layouts, and the local codes. The Garrison Standard, the operating code we have worked under since 2008, requires the same thing on every job: a written guarantee on every repair, a free second visit if something fails inside the guarantee window, and a phone that a live person answers around the clock. Lonnie Burke runs the operation, and the standard on every Dallas job is his name on the line.
Automatic Gate Installation in Dallas
Automatic Gate Installation in Dallas usually means pairing a swing or slide gate with a motorized operator, safety edges, and a loop detector so the gate opens on vehicle approach and reverses if something is in the path. The work is measured and scheduled, never rushed. In Dallas, a single swing gate with an operator typically runs $4,500 to $8,500. A slide gate with a rack and pinion drive and full entrapment protection starts around $7,000 and can reach $15,000 for longer spans or heavier steel.
Operator and Safety Systems
What a Dallas homeowner actually pays for is not just the motor. It is the loop detector buried in the driveway, the safety photocell pair, the edge sensors, and the wiring run that passes a UL 325 check. A DIY operator wired without these protections fails inspection and has to be pulled and re-worked. We stock parts for Linear, Viking, Ghost Controls, and DoorKing systems, and we match the operator to the gate weight and cycle frequency, not to whatever is cheapest on a shelf.
Power Runs and Groundwork
A proper automatic gate in Dallas includes the electrical conduit run from the house to the gate post, the concrete footing, and the grounding. On Dallas’s expansive clay, the footing is the part that separates a gate that works for a decade from one that drags by spring. We never shortcut the depth or the diameter of a post footer to save a few hours.
Gate Installation Services in Dallas
Gate Installation Services in Dallas cover more than just a new gate hung on hinges. For a driveway gate, the job includes the steel or aluminum frame, the panel or picket style you choose, the hinge posts, the operator if you want automation, and the safety hardware. For a pedestrian gate, the scope is smaller but the post work still matters. A basic pedestrian gate with a privacy panel and a latch runs $1,200 to $3,200 installed.
Driveway and Double Gates
Double swing gates remain the standard for Dallas homes with a wide approach. Two panels, two operators or a single master with a slave, and a center catch post. In clay soil, the center post and the two hinge posts all need footings below the frost line and wide enough to resist seasonal movement. A double gate installation in Dallas typically lands between $6,000 and $12,000 depending on the panel material and the operator count.
Security Gates and Slide Gates
A security gate in Dallas is not just heavier steel. It is the access control wiring, the keypad, the intercom, and the operator duty cycle. Slide gates work well on flatter Dallas lots with a long setback, and they need a level track or a cantilever design and a rack that stays square to the pinion. We see a lot of slide gates in North Dallas and around White Rock Lake where property lines are tight and a swing gate would arc into the driveway.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dallas
Our Dallas crews install and service operators from DoorKing, Linear, Viking, and Ghost Controls, and we keep common parts locally so a Dallas customer is not waiting on a distributor in Houston. When a homeowner in Mesquite or Lakewood has an existing operator, we match the new installation to that brand rather than forcing a swap. That means the wiring, the remote controls, and the limit switch logic stay consistent with what the property already uses. Where a builder or a previous contractor installed a no-name operator, we typically recommend a DoorKing or LiftMaster replacement because parts availability matters more in Dallas heat than people expect.
Common Gate Installation Problems We See in Dallas Homes
- Clay soil post heaving. Dallas sits on expansive clay that shrinks in summer dry spells and swells after fall rains. Gate posts set shallow drift out of alignment, the swing gate catches at the latch, and the slide gate binds on the rack.
- Undersized footings from a rushed install. A contractor digs a 24-inch hole, drops the post in, and pours quick-set. By spring the post has moved. We dig deeper and wider, with a footing that accounts for Dallas soil movement, not just the gate weight.
- Operators wired without UL 325 entrapment protection. No loop detector, no photocell, no safety edge. The gate fails an inspection and has to be re-worked from the ground up. This is the most expensive way to save money on a Dallas gate installation.
- Rack and pinion misalignment on slide gates. Even a quarter inch of drift between the rack and the pinion gear chews up both parts over time. We set the track and the rack on the same day, on the same soil, with the same tools, so the alignment holds through a Dallas wet-dry cycle.
Pricing for Gate Installation in Dallas, TX
A pedestrian gate in Dallas runs $1,200 to $3,200. A single automatic swing gate runs $4,500 to $8,500. A double automatic gate runs $6,000 to $12,000. A slide gate with a rack and pinion drive runs $7,000 to $15,000. What moves the number is the panel design, the operator brand and duty cycle, the amount of ground and conduit work, and whether the old footing has to be pulled and re-poured. We give you a written price before any work starts, and that price does not change at the door. A free estimate is a phone call away at (469) 530-2485, and every installation carries a written 365-Day Done Right Promise.
We Also Serve Cities Near Dallas
Our crews run regular routes through Irving, Duncanville, Balch Springs, and Mesquite, so scheduling a gate installation in Dallas does not mean waiting on a crew from three counties away. We coordinate dispatch from the Dallas-Fort Worth office and reach every part of Dallas locally. For the full scope of our work, see our Gate Installation service page, or read more about how we serve Dallas specifically.
Serving Dallas, TX – Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Dallas
Because Dallas sits on expansive clay soil that shrinks and swells with the region’s wet-dry cycles, and a post footing that works in stable soil shifts here within a season or two. The gate operator gets blamed, but the real failure is a shallow footer. We dig deeper and wider on Dallas jobs specifically to counter that movement.
A proper automatic gate installation in Dallas includes the foundation, the gate panel, the operator, the safety photocells, the loop detector, the edge sensors, and an electrical run that passes a UL 325 entrapment check. Every one of those pieces is part of the price we quote you up front. Call (469) 530-2485 for a written estimate.
No, and we will not promise one. Gate installation in Dallas is measured, ordered, and scheduled, because a rushed footing in Dallas clay is a failing gate within a year. Our crews usually schedule within one to two weeks and arrive on the day we commit to.
We install and service Linear, Viking, Ghost Controls, and DoorKing operators in Dallas, and we keep common parts locally so a repair or replacement is not held up by shipping. If you already have a specific brand on the property, we match the new installation to it.
The heat and the clay both work against it. The track shifts with soil movement, the rack drifts out of square with the pinion gear, and the gate starts to skip or grind. We set the track and the rack together, on the same soil, so the alignment holds through a full Dallas wet-dry cycle. For a slide gate quote, call (469) 530-2485.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Dallas since 2008.
If you need a gate installed in Dallas, call (469) 530-2485 for a free estimate. A live person answers, the price is written before the work starts, and the guarantee lasts a full year, in writing.