Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Irving
Gate installation in Irving usually means one of two things: a new gate on a driveway or pedestrian entry, or replacing a gate that has started sagging, jamming, or failing to open. We build both, and we build them for Irving’s specific conditions. Our technicians know the Valley Ranch, Las Colinas, and University Hills neighborhoods well, and we schedule installation work across the city every week. If you need a gate that stays square and operates cleanly, call (469) 530-2485 and we’ll get you a written price before any work begins.
A full installation is not a same-day job. We measure, order, build footings, pour concrete, mount the operator, wire the power and safety devices, then test everything. Typical timeline in Irving runs from one to two weeks from first measure to a finished, operating gate, depending on material and automation choices. What we never do is quote a price that moves at the door.
Why Carver Gate Repair Is Irving’s Preferred Gate Installation Company
Irving homeowners call us for gate installation because our process is legible from the first phone call. You get a live person, a scheduled measure, a written scope of work, and a fixed number. We do not dispatch salespeople. We dispatch background-checked, uniformed technicians who install gates every day, not a general contractor who fits gate work between remodels and fencing jobs.
We work to the Garrison Standard, the operating rules of the Garrison Partners family we have been part of since 2008. That standard covers the things Irving homeowners tell us matter most: a written guarantee on every repair and installation, a free second visit if anything fails inside the guarantee window, and site cleanup before we leave. Not as extras. As the floor.
Gate installation is all we do. Swing gates, sliding gates, driveway gates, pedestrian gates, security gates, double gates. If it swings on hinges or rolls on a track and runs on a motor, our Irving crews build and service it. That narrow focus is why we stock parts in our Dallas-Fort Worth office that a handyman would have to order and wait on.
Electric Gate Installation in Irving
Electric Gate Installation in Irving is our most requested service, and for good reason: an automated gate changes how a property functions. You pull onto the driveway, press a remote or tap a keypad, and the gate opens without you leaving the vehicle. For homeowners on busier streets like MacArthur Boulevard or Story Road, that’s a real daily convenience, and for properties with pools, a motorized gate with proper entrapment protection also serves as a code-compliant safety barrier.
A complete electric gate installation in Irving typically runs $4,200 to $9,800 depending on gate type, operator, and power run distance. That number includes the gate itself, the operator, mounting hardware, safety devices, and the electrical connection. If you already have a manual gate and want to add a motor, we can often do that for less, sometimes $2,800 to $4,500, but only if the existing gate is structurally sound and the post depth is adequate for Irving’s soil. Many older gates fail that second test.
Operator Selection and Power Runs
We install operators from DoorKing, Linear, and Ghost Controls on most Irving residential jobs, matching the operator to the gate’s weight and duty cycle rather than forcing a brand that is not right for the job. Your installer will run a dedicated circuit from the panel to the operator, never tap an existing outdoor outlet that might be shared with landscape lighting or a pool pump. In Irving that matters during summer lightning season, when power surges cook undersized electrical work.
Safety Requirements on Automated Gates
Every automatic gate installation in Irving must meet UL 325 entrapment protection standards. That means monitored safety photocells or contact edges on the gate, reversal testing, and audible alarms where the standard calls for them. These are not upgrades. They are the law, and a gate without them is a liability to every person and vehicle that uses the driveway.
Driveway Gate Installation in Irving
Driveway Gate Installation in Irving usually starts with a practical question: how wide is the current opening, and does the house sit on flat ground or a grade? Most Irving driveways in established neighborhoods like Woodhaven and Sherwood Forest are between 10 and 16 feet wide, which determines whether we build a single swing panel, a double swing, or a slide gate on a track. Flat lots handle all three; sloped driveways almost always require a slide gate so the panel does not drag.
A new driveway gate installation in Irving runs $5,000 to $11,500 for a complete automated double swing or slide system with operator, safety devices, and power run. A manual driveway gate without automation runs $2,200 to $4,800 installed. Those are realistic Irving market numbers, not a teaser to get us in the door. We write the number before we start, and it does not move unless you change the scope in writing.
Footings in Irving’s Soil
Irving’s black clay soil expands and contracts violently between wet and dry seasons. A gate post set in concrete at 18 inches will lean within a year. We set posts at 24 to 36 inches, below the frost line and deep enough to anchor into stable soil. That is more concrete and more labor than a shallow footing, and it is the difference between a gate that stays square for a decade and one that sags before the next winter.
Sliding vs. Swing Gates
Sliding gates work well on flat Irving lots and on driveways where a swing panel would block the sidewalk or block the car. They cost more because of the track and roller hardware, usually $700 to $1,800 more than a comparable swing gate. Swing gates are quieter and simpler, but they require enough setback space inside the property for the panel arc to clear parked vehicles. Our measure includes that arc check.
Trusted Brands We Service in Irving
Our technicians are factory-trained on the operators Irving homeowners already have, and the ones we install new. We work on DoorKing for heavy-duty commercial-style residential gates, Linear for value-driven swing and slide operators, and Ghost Controls for quieter, battery-backed systems that pair well with solar. Because our Dallas-Fort Worth office stocks parts for these brands, we are not waiting on a distributor shipment when your operator board fails. For Irving customers that means shorter repair windows and fewer return trips. Parts are matched to the brand already mounted on your post, not whatever is on the truck.
Common Gate Installation Problems We See in Irving Homes
- Leaning hinge posts from expansive clay. Irving’s black gumbo soil swells after spring rains and shrinks in August heat. A post set at 18 to 24 inches will migrate, and then the gate sags and drags. The fix is pulling the old post and setting a new one at 30-plus inches with proper concrete.
- Photocell and edge sensor failures on automated gates. Misaligned photocells cause the gate to stop mid-travel or reverse for no visible reason. A missing or bypassed safety edge is an entrapment hazard and a code violation. We test and align both on every installation.
- Loop detector and keypad failures from water intrusion. North Texas flash floods move fast through Irving streets and low-lying driveways. Driveway loop wires short out when conduit fills with water, and keypads stop responding when seals fail. We use sealed conduits and elevated keypad enclosures on new installs.
- Undersized operators on heavy gates. A swing gate built from solid steel panels needs a real operator, not a light-duty arm rated for half the gate’s weight. Wrong sizing burns out motors and strips gears. We spec the operator by measured gate weight and use factor, not by guess.
Pricing for Gate Installation in Irving, TX
We would rather give you a real range than a vague promise. Here is what Irving homeowners should expect for a complete installation, including materials, labor, concrete, operator, safety devices, and cleanup:
- Manual driveway gate, single swing: $2,200 to $4,800
- Automated driveway gate, single swing: $5,000 to $8,500
- Automated driveway gate, double swing: $6,500 to $11,000
- Automated sliding gate: $6,800 to $11,500
- Pedestrian gate, welded steel or aluminum: $1,400 to $3,200
- Adding automation to an existing sound gate: $2,800 to $4,500
What moves the number is real: gate width, material, whether we need to pull and reset an existing post, and the electrical run from your panel to the gate. You will see all of that itemized in writing before any work starts. Call (469) 530-2485 for a free estimate and a written proposal. The number we show you is the number you pay.
If you are also weighing repair instead of replacement, our Gate Installation team can tell you honestly whether your current gate is worth saving. We will not sell you a new gate when the old one can be rebuilt.
We Also Serve Cities Near Irving
If you are outside Irving but close by, we serve Gate Installation in Irving and the surrounding metro, including Dallas, Balch Springs, Hutchins, and Mesquite. The same written pricing and the same guarantee apply everywhere we work. Call (469) 530-2485 and tell us which city you are in.
Serving Irving, TX – Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Irving
We set gate posts at 30 to 36 inches in Irving’s expansive clay, with concrete poured below the frost line. That depth anchors the post below the soil layer that swells and shrinks seasonally. Shallower posts, common in budget installations, lean within a year in Irving. If your current gate is sagging and the post was set at less than 24 inches, the post is likely the problem, not the hinge. Call (469) 530-2485 and we will confirm it on site.
Every automatic gate in Irving must meet UL 325 entrapment protection standards. That means at least one monitored safety device, either photocells that stop the gate when the beam is broken or a contact edge that reverses the panel on pressure, plus automatic reversal testing and a warning system where required. We install and test these on every automated gate, and we never wire around them. A gate without working entrapment protection is a code violation and a liability.
No, and we will not pretend to. Gate installation in Irving requires measuring the opening, ordering the correct gate and operator, digging footings, pouring concrete that must cure, then mounting, wiring, and testing. That takes one to two weeks from first measure to a finished gate. What we do offer is a free same-week measure and a written proposal, so you have a fixed price and a schedule in hand quickly. Call (469) 530-2485 to get on the schedule.
We install and service DoorKing, Linear, and Ghost Controls operators across Irving, matched to the gate’s weight and duty cycle. DoorKing handles heavy slide and double-swing gates well. Linear is a solid, cost-effective choice for single swing gates. Ghost Controls works well for battery-backed and solar applications. We stock parts for all three in our Dallas-Fort Worth office, so repair parts are close by when you need them.
In Irving the most common reason is the hinge post moving in expansive clay. If the post was set shallow, the soil shift leans it, and the gate sags regardless of what hinge repair was done. Panel-level fixes buy time but do not solve the foundation problem. The real fix is pulling the post, digging a deeper footing, and resetting it in concrete. That is what we did on Story Road in south Irving, where a sagging swing gate went two years without issue after we reset the post at 30 inches. Call (469) 530-2485 and we will tell you whether your gate needs a hinge adjustment or a new footing.
Call Carver Gate Repair for Gate Installation in Irving
If your gate is sagging, failing, or you simply want a new one built to last in Irving’s soil, call (469) 530-2485. You will reach a live person. We will schedule a free measure, write you a fixed price, and install the gate to the Garrison Standard. Written guarantee on every job. Background-checked, uniformed technicians. Clean site when we leave. That is how gate installation in Irving should work.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Irving and the surrounding metro.