Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Irving, TX
Gate repair in Irving, TX isn’t a specialty most contractors plan for. It’s a city where the housing stock runs from 1950s ranch homes south of Highway 183 to newer builds in Las Colinas and Valley Ranch, which means gate hardware, post footings, and motor setups vary block to block. We work on all of it. Carver Gate Repair sends background-checked, uniformed technicians to Irving jobs, writes the price down before any work starts, and guarantees every repair in writing for a full year. Call (469) 530-2485 and a live person answers, day or night.
Why Irving Homes Are Different
Irving’s soil is the first thing that shapes gate work here. The clay-heavy ground in older neighborhoods like Hospital District and Bear Creek expands when wet and contracts in drought, and that movement slowly shifts gate posts out of plumb. A gate that worked fine in April drags in August. We see it regularly in Irving: the post hasn’t failed, the ground under it has shifted. The repair that lasts is one that accounts for that movement, not just a hinge adjustment.
Housing age matters too. Homes across Central Irving and MacArthur corridors carry decades of accumulated gate work, some of it good, plenty of it questionable. We find mismatched hinges, undersized operators on overweight gates, and wiring that predates modern safety standards. Newer developments in Las Colinas and Valley Ranch lean toward ornamental iron and heavier automatic gates, where the motor and the gate weight have to be matched correctly or the limit switch burns out early. Each part of Irving brings its own problems, and each is a job we’ve handled before.
Our Main Irving Services
Most calls from Irving homeowners fall into two categories: a gate that stopped working, and a gate that needs to be installed or replaced. Both have their own dedicated pages, but here’s the short version of what each job looks like in Irving.
Gate Repair in Irving
Repair calls in Irving usually start the same way: the gate won’t open, it won’t close all the way, or it howls when it moves. Common culprits are worn hinge bearings, bent tracks on slide gates, failed limit switches, and loop detectors that stopped sensing vehicles. We diagnose the specific failure, show you the written price, and fix it. In Irving’s older neighborhoods especially, we check the posts and ground movement as part of every repair, because a fix that ignores the shifting soil just comes back. Gate Repair in Irving covers typical jobs and what they cost, in detail.
Gate Installation in Irving
A new gate in Irving means matching the gate to the driveway, the terrain, and the way you actually use it. We measure, order, and set posts, hang the gate, and set the operator if there is one. In Las Colinas and Valley Ranch, HOA requirements often dictate material and color, and we work within those specs. In older parts of Irving, we’re usually pulling rusted posts and replacing them with deeper concrete footings that hold up better to the clay soil. Gate Installation in Irving covers the full process and Timeline.
Gate Motor Repair in Irving
When the gate itself is fine but the motor won’t start, hums, or stops mid-travel, the problem is usually in the operator: a failed capacitor, a stripped gear, a control board that lost its programming, or a limit switch that no longer tells the motor where to stop. We carry parts for the brands most common in Irving, including Ghost Controls and Viking openers used on many residential driveway gates. Gate Motor Repair in Irving lists the brands we service and the typical repair cost range.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Irving
We service Viking, Ghost Controls, DoorKing, and Elite operators across Irving, along with five other major brands. We stock common circuit boards, limit switches, and gear kits locally, which means most motor repairs don’t wait on a distributor ship-out. See our brands for the full list.
Pricing for Gate Company in Irving, TX
| Service | Typical range in Irving |
|---|---|
| Gate repair (parts and labor) | $180 – $340 |
| Hinge replacement | $85 – $170 per hinge |
| Gate wheel replacement | $60 – $120 per wheel |
| Gate motor repair | $200 – $460 |
| Circuit board replacement | $180 – $350 |
| Limit switch replacement | $120 – $250 |
| Loop detector replacement | $150 – $300 |
| Gate operator installation | $500 – $1,250 |
| Full gate installation | $1,500 – $4,500+ depending on material and length |
In Irving, the biggest price drivers are gate weight and material. A heavy ornamental iron gate in Las Colinas takes more labor and a stronger operator than a light aluminum tube gate in Bear Creek. Regardless of the job, you get a written price before any work starts, and that number does not move at the door.
Neighborhoods We Serve in Irving
We run gate repair and installation calls all across Irving, from the older blocks in the Hospital District to the gated communities off MacArthur Boulevard to the newer developments in Valley Ranch and Las Colinas. Our technicians know which neighborhoods sit on the worst-expanding clay and which have HOA specs to meet.
- Las Colinas
- Valley Ranch
- Bear Creek
- Hospital District
- Heritage District
Service Area – Cities Near Irving
While this page covers gate work in Irving specifically, our dispatch also covers nearby markets. Homeowners in Dallas, TX call us for the same written prices and guaranteed work. We also take jobs in Balch Springs, TX, Hutchins, TX, and Mesquite, NV.
Serving Irving, TX – Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Irving
We schedule Irving calls based on urgency and location, and emergency gate failures, like a gate that won’t close at all, get priority. Most repair calls in Irving are seen same-day or next-day. The phone is answered by a live person 24/7 at (469) 530-2485, so you’ll know the schedule before you hang up.
Irving permit requirements depend on the scope. A straight gate repair on existing posts typically doesn’t need one. A new installation or gate that involves electrical work or extends into the right-of-way may need city approval. We can tell you what applies to your specific job, and most of our Irving calls start with a written estimate before any permit or materials decision is made.
Yes. We work to HOA specs in Las Colinas, Valley Ranch, and other covenant communities around Irving. That means material, color, height, and operator type get matched to what your HOA has on file before we order anything, so the gate doesn’t get flagged after installation. Call (469) 530-2485 and we’ll check your HOA requirements as part of the estimate.
For a written estimate on any gate job in Irving, call (469) 530-2485. A live person answers, and the price you get is what you pay.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.