Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Kent, WA
Gate work in Kent means dealing with a specific set of conditions: older East Hill ranch homes with original swing gates, newer subdivisions on the West Hill with HOA-managed entrances, and plenty of properties along the Green River valley where soil moisture takes a toll on buried operators and loop detectors. We come prepared for all of it. Carver Gate Repair handles gate repair, gate installation, and gate motor repair across Kent, with a written price before any work starts and a live person answering the phone at (469) 530-2485.
Why Kent Homes Are Different
Kent’s housing stock runs the full range, and each era has its own gate problems. Homes built in the 1960s and 70s around East Hill and Panther Lake often have ornamental steel gates on posts set in concrete that has shifted over decades. The gate still looks fine, but the hinges are binding and the latch no longer lines up. We see that constantly in the older pockets of Kent.
Newer developments along the West Hill and near Lake Meridian tend toward automatic driveway gates with operators from Linear, Viking, or DoorKing. Those systems are more about electronics than steel, and the most common failures there are limit switches that drift, loop detectors that stop reading vehicles, and control boards damaged by our wet winters. Kent’s average rainfall means every gate install has to account for drainage at the operator base and sealing on every connection. A gate that works in a dry summer can develop sensor faults the first time the real rain arrives in October.
There is also a patchwork of HOAs across Kent with specific rules about gate height, finish, and setbacks. We have worked in neighborhoods where an HOA requires a specific color match on any replacement gate, and others where a permit is mandatory before a new motorized gate can go in. The process matters just as much as the hardware, and we account for it on the front end.
Our Main Kent Services
Most calls from Kent homeowners fall into two buckets: a gate that will not open or close reliably, and an older gate that needs to be replaced outright. Here is what each job looks like in Kent, and each service has its own page with full pricing and details.
Gate Repair in Kent
Repair work in Kent usually starts with hinges, a misaligned latch, or a gate that sags on the hinge side. Older posts in Kent’s clay-heavy soil shift over time, and a gate that dragged on one corner for a year has now bent the hinge and cracked the weld. We fix the underlying post movement, not just the symptom. The 365-Day Done Right Promise applies to every repair we do in Kent, and it is in writing before we start. See the full rundown on Gate Repair in Kent.
Gate Installation in Kent
A new gate in Kent has to survive wet winters without rusting at the bottom rail and without a motor that drowns in standing water. We measure, order, and install to the site, then run and test the operator through full cycles before we call the job done. Concrete work, drainage, and HOA compliance are all part of the quote. Homeowners who want the full picture can read Gate Installation in Kent.
Gate Motor Repair in Kent
When a Kent gate motor hums but does not move, or runs but reverses itself mid-cycle, the issue is almost always the limit switch, the capacitor, or a control board with water intrusion from a bad seal. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we bring the right board on the first trip whenever the homeowner can tell us the brand and model. For motor-specific detail, see Gate Motor Repair in Kent.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kent
We service Linear and Viking operators most often in Kent, and DoorKing on larger community gates. We stock common control boards, limit switches, and capacitors locally so many Kent repairs are a single visit. See our brands for the full list.
Pricing for Gate Company in Kent, WA
| Service | Typical range in Kent |
|---|---|
| Gate repair diagnostic | $75 – $125 |
| Hinge replacement | $150 – $300 |
| Swing gate hinge and latch repair | $200 – $400 |
| Gate sag and misalignment correction | $180 – $425 |
| Gate opener repair (general) | $250 – $700 |
| Gate motor replacement | $850 – $1,900 |
| Control board replacement | $300 – $700 |
| Limit switch replacement | $150 – $350 |
| Loop detector repair or replacement | $250 – $550 |
| Gate installation (standard single swing) | $2,500 – $6,500 |
What pushes a Kent price toward the top of a range is usually the post work: digging and resetting posts in clay, adding concrete, and running new power where none existed. The price we quote is the price we do the job for. It is written down before any work starts, and it does not move at the door.
Neighborhoods We Serve in Kent
We cover all of Kent, and we dispatch locally. Most Kent neighborhoods get same-day or next-day scheduling for repair calls, depending on when you call and what the diagnostic shows.
- East Hill
- West Hill
- Panther Lake
- Lake Meridian area
- Downtown Kent and the valley corridor
Service Area – Cities Near Kent
Beyond Kent, we run repairs and installations in surrounding South King County cities, including Renton, WA, Federal Way, WA, Auburn, CA, and Maple Valley, WA. Scheduling and dispatch are coordinated from our Seattle office, and crews are sent to Kent directly.
Serving Kent, WA – Our Local Coverage Area
We’re based in the Kent area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kent
Most Kent repair calls are scheduled same-day or next-day. We give an arrival window when you call, and a real person at (469) 530-2485 tracks the technician so you are not left guessing.
That depends on your neighborhood. Some Kent HOAs require design review and color matching before a new gate goes in, and some motorized installations require a permit. We walk through what your property needs during the estimate, in writing.
We cover all of Kent: East Hill, West Hill, Panther Lake, the Lake Meridian area, downtown, and the valley corridor. If your gate is inside Kent city limits, we will come out.
If your gate will not close, sags, or the motor has stopped cooperating, call Carver Gate Repair at (469) 530-2485 for a free estimate. A live person answers, and the price is in writing before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kent Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.