Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fort Worth
A full gate installation in Fort Worth typically runs $2,800 to $9,500 depending on the gate type, groundworks, and whether you’re automating it. We coordinate scheduling from our Dallas-Fort Worth office, and our crews work Fort Worth neighborhoods directly. Most residential installs take one to three days on site once materials are confirmed, not counting concrete cure time. If you’re replacing a gate that heaved on Fort Worth’s clay, or building a new driveway entrance off a busy road like Camp Bowie Boulevard, call (469) 530-2485 and we’ll give you a written price before any work starts.
Why Carver Gate Repair Is Fort Worth’s Preferred Gate Installation Company
We focus on gates. That’s the whole trade. A general contractor might hang a gate between two posts and call it done, but Fort Worth’s soil doesn’t forgive shallow footings. Our crews dig to the depth the clay demands, set belled concrete footings, and mount operators so the gate swings or slides true from day one. Every technician arrives in uniform, background-checked, and carrying a written scope of work. The price you approve is the price on the invoice. No movement at the door.
Lonnie Burke runs the operation to what we call The Garrison Standard. Written prices before work starts. A written guarantee on every install, good for a full year. If something fails inside that window, we come back at no charge. That’s not a sales line. It’s the way the crew is expected to operate on every job, from a pedestrian gate in Wedgwood to a heavy double swing gate off Western Center Boulevard. One phone number, answered by a live person, around the clock. (469) 530-2485.
Gate Fabrication in Fort Worth
Gate Fabrication in Fort Worth means building the gate itself to the dimensions of your opening and the demands of your site, rather than cutting a stock panel to fit. That matters here because Fort Worth lots run the full range: tight side-yard pedestrian gates in Arlington Heights, wide double driveway entrances in Mira Vista, long slide gate runs in rural-feeling corners of far north Fort Worth near Saginaw. A fabricated gate is welded, braced, and primed for your specific opening. It’s not a universal kit that gets shimmed.
On the pricing side, a fabricated single swing gate for a standard residential driveway in Fort Worth runs roughly $1,400 to $3,200 for the gate itself, depending on steel gauge, decorative elements, and dimensions. A custom double gate runs higher, typically $3,500 to $6,500. These figures assume the existing posts can be reused. If we’re setting new posts in clay, groundworks are priced separately.
Design and Material Selection
We work with steel and ornamental iron for Fort Worth residential gates. Steel handles the temperature swings and sun exposure well when primed and powder-coated correctly. Ornamental iron gives you the look a lot of Fort Worth homeowners want, especially in established neighborhoods where driveway gates match the home’s original character. We’ll walk you through gauge, spacing, and finish options before anything is cut or welded.
Site Measurement and Fit
We measure on site, not from a satellite image or a homeowner’s tape. That includes checking the actual grade at both posts, the swing arc or slide distance, and any slope that affects how the gate hangs. Fort Worth driveways often pitch toward the street for drainage. A gate that looks fine on paper binds in the real world if the installer never checked the grade. We check it.
Automatic Gate Installation in Fort Worth
Automatic Gate Installation in Fort Worth involves more than bolting an opener onto a gate. It means running or confirming power at the gate, mounting the operator correctly for the gate type, installing UL 325 compliant entrapment protection, and testing the full obstruction-reversal sequence before the job closes. Fort Worth permits residential automatic gate operators on a standard electrical permit. Inspections require demonstrating the safety photocell or edge sensor working under load. We build for that from the first day, not as a retrofit after the inspector flags it.
Cost for a complete automatic swing gate installation in Fort Worth, including a new operator, safety photocells, and standard control wiring, typically runs $3,800 to $6,800. Automatic slide gate systems run higher, usually $5,500 to $9,500, because the rack and pinion, pad leveling, and motor sizing are more involved. These are real numbers for this market. We’ll quote your exact job in writing before any materials are ordered.
Swing Gate Operators
Swing operators work best for Fort Worth driveways with a level approach and room for the gate to arc inward or outward. We mount the operator on a reinforced post and set the limit switches so the gate stops cleanly at full open and full close. The articulating arm needs room to travel. On tight lots near the hospitals, a slide gate sometimes makes more sense simply because there’s no swing arc to clear.
Slide Gate Operators
Slide gates run on a track and rack. The operator turns a gear that engages the rack along the gate’s length. In Fort Worth, the two things that kill slide gate systems are a pad that wasn’t re-leveled before the track went down and a rack and pinion tooth contact that was never checked after install. We re-level the pad, shim the track, and verify full tooth engagement before the operator is ever powered. That’s the difference between a gate that runs for a decade and one that burns out a motor in 18 months.
Trusted Brands We Service in Fort Worth
We install and service operators from Viking, Ghost Controls, and DoorKing, among others. Each brand has its own control board logic, limit switch configuration, and compatibility quirks. Our technicians train on the specific brands we install so they’re not reading the manual on your driveway. For Fort Worth customers, we keep common control boards, photocells, and remote transmitters in local stock, which means fewer jobs waiting on a part that’s shipping from three states away. If your existing gate runs a DoorKing slide operator and you want to keep the same remote system, we can match the new equipment to what you already know how to use.
Common Gate Installation Problems We See in Fort Worth Homes
- A new gate bolted to the old hinge post on expansive clay. The footing heaves after a wet spring, the post tilts, and the gate sags within a season. The fix is a new belled footing dug below the active clay zone, not a longer bolt.
- Slide gate operators installed on an unlevel pad. The track drops a half inch, the gate binds, the rack and pinion fights itself, and the motor burns out. We level the pad and check tooth contact before anything runs.
- Automatic gates without verifiable UL 325 entrapment protection. A gate with no working photo-eye or edge sensor will fail a Fort Worth electrical inspection. It’s also genuinely dangerous. We hardwire the safety devices and test obstruction reversal at the panel before we call the job done.
- Undersized operators on heavy double gates. A double driveway gate in Fort Worth’s wind needs more torque than the spec sheet’s minimum. We size the operator for the actual gate weight and wind load, not the cheapest motor that will move it on a calm day.
Pricing for Gate Installation in Fort Worth, TX
Here are the ranges we quote most often in Fort Worth. A pedestrian gate install runs $900 to $2,200. A single swing driveway gate, fabricated and hung, runs $2,800 to $4,500. A double driveway gate runs $4,000 to $7,500. A slide gate with operator and safety system runs $6,000 to $9,500. Groundworks, electrical trenching, and permit fees are quoted separately and always in writing. What moves the number most on a Fort Worth job is the post footing depth and whether we’re cutting into existing concrete. Call (469) 530-2485 for a free estimate. You’ll get a written price before any work starts, and that number doesn’t move unless you change the scope.
We Also Serve Cities Near Fort Worth
Our crews work Haltom City, North Richland Hills, Hurst, and Kennedale regularly, along with the full Fort Worth metro. If you’re just outside the city limits and need Gate Installation work, call and ask about scheduling. This page is for Fort Worth specifically, but the same crew and the same written-price standard cover the surrounding area. Gate Installation in Fort Worth is our focus, and we treat nearby cities with the same process.
Serving Fort Worth, TX – Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Fort Worth
A hinge post in Fort Worth’s Blackland Prairie clay should be set a minimum of 36 inches deep, and for heavy gates we go 42 to 48 inches with a belled bottom wider than the shaft. That bell shape anchors the post against heave. The clay expands when wet and contracts in drought, and a straight-sided hole at 24 inches will move within a year or two. Call (469) 530-2485 and we’ll tell you what your specific gate weight and soil condition require.
Yes. Fort Worth inspections require UL 325 compliant entrapment protection on automatic gate operators, which means working photocells, a reversing edge sensor, or both. The inspector will ask to see it function. We hardwire the safety devices, test the reversal force at the panel, and document it so the inspection passes the first time. Call (469) 530-2485 for an install that’s built to pass inspection.
The usual cause in Fort Worth is a pad that settled or was never level, so the rack and pinion tooth contact walks out of alignment as the track shifts. Once the gate binds, it jumps the rack or strips teeth. The fix is re-leveling the pad, resetting the track, and verifying full tooth engagement before the operator is powered back on. If it’s already stripped the rack, we replace the rack section. Call (469) 530-2485 and we’ll diagnose it on site.
Yes, for the right site. Solar works where the panel gets consistent direct sun and the gate sees light to moderate daily cycles. A heavily shaded lot under mature Fort Worth oak trees, or a double gate that cycles constantly, usually needs line voltage instead. We’ll assess your sun exposure and cycle count before recommending anything. Call (469) 530-2485 for a straight answer on your property.
Most Fort Worth gate installs take one to three days on site, plus schedule lead time for material order and concrete cure. We do not promise same-day installation because proper groundworks and post setting can’t be rushed. We give you a firm schedule window when we quote the job. Call (469) 530-2485 to get your install on the calendar.
If you’re ready to replace a gate that’s dragging, build a new driveway entrance, or automate an existing gate in Fort Worth, call us at (469) 530-2485. Lonnie Burke and the crew will give you a written price, a firm schedule, and a year-long guarantee in writing. No moving numbers. No no-shows. Just a gate that works, set on footings built for Fort Worth’s ground.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Fort Worth since 2008.