Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Katy
Gate installation in Katy runs from about $2,800 for a basic single swing gate to $9,500 or more for a double driveway gate with automation and safety systems. Most projects take two to four days on site, depending on footing work and whether we’re running new power. That’s the honest range, and we’ll put a written price in front of you before any concrete gets poured or any post gets set. If you’re researching Gate Installation for a Cinco Ranch driveway or an older acreage lot off FM 1463, call (469) 530-2485 and we’ll walk you through what your specific setup requires.
Why Carver Gate Repair Is Katy’s Preferred Gate Installation Company
Katy homeowners have dealt with enough no-shows and price changes to be skeptical of any contractor. That skepticism is earned, and we don’t argue with it. What we do instead is simple: we answer the phone with a live person, we send a background-checked technician in a uniform, and we hand you a written price before any work starts. Lonnie Burke runs our crews to The Garrison Standard, which means the number on the quote is the number on the invoice. Every job, no exceptions.
We work exclusively on gates and gate motors. That’s the whole focus. We’re not a general contractor who happens to hang a gate between remodeling jobs. Our technicians are trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. When a Katy homeowner calls us about a gate that won’t open, we know which operator is on the post, which parts it needs, and what it should cost before we roll the truck.
Automatic Gate Installation in Katy
Automatic Gate Installation in Katy means more than bolting a motor to a post. We’re sizing the operator to the actual weight of the gate panel, setting footings deep enough to hold in Katy’s expansive clay, running power and low-voltage wiring, and installing the safety systems that UL 325 requires. A gate that opens and closes on its own has to stop when something is in the way. That’s not optional equipment. It’s the law, and it’s the difference between a gate that works for fifteen years and one that fails on a busy Cross Creek Ranch driveway in eighteen months.
Driveway and Double Gate Automation
A double driveway gate is the most common automatic install we do in Katy. Homeowners want to pull up, tap the remote, and roll through without getting out. The automation package matters more than the gate itself here, because a heavy ornamental steel panel will burn out a light-duty operator in two years or less if nobody did the load calculation. We match the operator to the panel weight and the duty cycle, then test the whole assembly under load before we leave.
Safety Systems and Reversal Testing
Every automatic gate we install in Katy gets working safety photocells, a reversing edge where the gate design calls for it, and a full reversal test. We also verify the force setting so the gate stops and reverses without crushing anything in its path. This is what a proper install includes. Cheaper bids skip it, and homeowners don’t know until something goes wrong.
Gate Installation Services in Katy
Gate Installation Services in Katy cover the full scope: new gate panels, new posts, new operators, new wiring, and the groundworks that hold it all in place. We regularly work in neighborhoods like Cinco Ranch, Grand Lakes, Firethorne, and Nottingham Country, along with the older acreage properties along FM 1463 and the Grand Parkway corridor. The soil conditions change from one street to the next, and the install approach changes with them.
New Gate and Post Setting
Katy’s mix of new-build master-planned subdivisions and older acreage properties along the Grand Parkway corridor means gate posts here are often set in expansive Houston-area clay that swells and shrinks with our wet-dry cycles. We size post footings and drainage differently depending on whether we’re in a 2020s Cinco Ranch-style build or a 1990s rural lot. That’s not a sales point. It’s what keeps the gate from sagging after two wet seasons.
Sliding, Swing, and Security Gates
A sliding gate needs a level track and a footing that won’t heave. A swing gate needs hinge posts that stay plumb and an operator arm that’s matched to the panel weight. A security gate needs all of that plus access control wired correctly. We install all three in Katy regularly, and the process starts with a site walk, not a phone estimate. We need to see the soil, the panel, the power access, and the layout before we write the number.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Katy
We install and service Linear, Viking, Ghost Controls, and DoorKing equipment, among the nine brands our technicians train on. We keep the common boards, remotes, and safety components in local stock so a Katy repair doesn’t wait on a parts shipment from out of state. Most motor replacement work finishes the same day we arrive. If you’re deciding between brands for a new install, we’ll tell you which operator matches your gate weight, frequency of use, and what’s already working well in your neighborhood. We don’t push one brand. We push the right fit.
Common Gate Installation Problems We See in Katy Homes
- Hinge posts set in expansive clay shift seasonally. A swing gate sags at the post, and any panel-only fix fails again within a season. The post itself has to be re-set with a deeper footing and proper drainage, or you’ll be back in the same spot by next spring.
- DIY or bargain installs skip UL 325 entrapment protection. No working safety photocell, no edge sensor. That’s a code problem and a liability on a busy Katy driveway. We see it on gates installed by handymen and landscapers who don’t do gates full time.
- Operators sized for a lighter gate get paired with a heavy ornamental steel panel. The operator burns out early because nobody did a load calculation for the actual gate weight. The fix is matching the motor to the panel, not buying the same undersized unit twice.
- Sliding gate tracks bind on bent rails or shifted footings. We replaced a LiftMaster gate operator on a slide gate in Cinco Ranch after the homeowner kept resetting the breaker every time the rack and pinion bound up on a bent track. The old post footing had shifted in the clay, so we re-poured it, re-leveled the rail, and installed fresh safety photocells before we’d call the job done.
Pricing for Gate Installation in Katy, TX
Here’s what we tell Katy homeowners on the phone, because it’s what we’d want to hear up front. A basic single swing gate with manual operation runs $2,800 to $4,500. Add automation and you’re at $4,500 to $7,000. A double driveway gate with full automation, safety systems, and new posts typically runs $6,500 to $9,500. Sliding gates fall in a similar range, with heavier panels and longer tracks pushing the upper end. The price includes the site walk, the written quote, the labor, and the full-year written guarantee. You’ll know the number before we dig. Call (469) 530-2485 for a free estimate. We quote it once, in writing, and it doesn’t move.
We Also Serve Cities Near Katy
Our crews work throughout the Katy area and the surrounding communities. We serve Gate Installation in Katy plus Fulshear, Richmond, Sugar Land, and Stafford. If you’re just outside the Katy city limits, call and we’ll confirm coverage for your address. Dispatch is coordinated from our Houston office, and our local crews cover Katy addresses daily.
Serving Katy, TX – Our Local Coverage Area
We’re based in the Katy area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Katy
Plan on two to four days on site. Day one is layout, excavation, and footings. Concrete needs time to cure before we hang a gate on it. After that, we set posts, hang the panel, mount the operator, run wiring, and test the safety systems. Weather and soil conditions can add a day, but we’ll tell you the schedule before we start and we stick to it. Call (469) 530-2485 and we’ll give you a realistic timeline for your specific gate.
Most automatic gate installations in Katy require a permit, and some neighborhoods with HOAs have additional design and setback rules. We handle the paperwork and know what the local inspectors look for, especially on entrapment protection and electrical runs. We won’t cut the corner on permits, because a gate that fails inspection is a gate that doesn’t open. Ask us about your specific property when you call.
A proper install includes post footings sized for Katy’s clay soil, drainage to keep water out of the footing, power and low-voltage wiring run to code, safety photocells and reversing edges, operator mounting, and full testing under load. If a quote doesn’t include those line items, the price is low because the scope is missing. We write every line on the quote so you can see exactly what you’re paying for.
In Katy, a sagging gate usually means the post is moving, not the panel. Expansive clay swells when wet and shrinks when dry, and over a few years that cycle walks the post out of plumb. A panel-only fix looks fine for a few months, then the sag comes back. The durable fix is re-setting the post with a deeper footing and proper drainage, then re-hanging the gate. We’ll show you the post movement on site and explain the repair before we quote it.
We install and service nine gate-motor brands, including Linear, Viking, Ghost Controls, and DoorKing. If your existing gate has a LiftMaster, FAAC, BFT, Elite, or Mighty Mule operator, we handle that too. We match the operator to the gate weight and how often it cycles. Call (469) 530-2485 and tell us what’s on your post now, and we’ll tell you what your options are.
Written by Lonnie Burke, Owner at Carver Gate Repair, operating to The Garrison Standard with written prices, background-checked technicians, and a full-year guarantee on every job.