Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Everett, WA
Carver Gate Repair is a gate company serving Everett, WA, focused only on gates and the motor systems that run them. We handle gate repair, new gate installation, and gate motor repair, and every job starts with a written price before any work begins. This page is the Everton overview: what makes gate work here different from Seattle or Bellevue, what repairs and installations typically cost, which neighborhoods we cover, and how our process works. If you need a gate fixed today, call (469) 530-2485 and a live person answers.
Why Everett Homes Are Different
Everett’s housing stock runs from century-old Craftsman bungalows in Riverside and Bayside to 1960s split-levels in View Ridge and newer hillside builds around Silver Lake and South Forest Park. That mix means gates sit on a wide range of post conditions and ground grades, and a repair crew cannot assume anything from the curb. Sloped driveways are common in the Eastmont and Forest Park neighborhoods, so swing gates there often need the hinge geometry rechecked when a gate starts dragging or binding.
The marine air off Port Gardner Bay is harder on steel and electronics than inland climates. Mild but damp weather keeps condensation in operator housings and speeds corrosion on unprotected hardware, particularly for homes closer to the waterfront in Bayside and Northwest Everett. We routinely replace limit switches and transformer boards that have failed from moisture ingress, not from age. Homes near the Mukilteo line and up Casino Road see the same patterns. Properties with a gate across a shared drive or an HOA-governed entry off Evergreen Way tend to have stricter timelines and paperwork than a single-family driveway gate, and we’re used to working within those.
Our Main Everett Services
Three services cover nearly every gate job in Everett. Each has its own dedicated page with pricing detail, but here is the short version of what each involves here.
Gate Repair in Everett
Most calls start as a gate that drags, a motor that hums but will not move, or a gate that stopped opening after a storm. In Everett, wet winters push corrosion and limit-switch failures to the top of the list. We start by checking the gate’s physical alignment and its operator, then write a repair price before touching anything. The full breakdown of common repairs and what they cost is on the Gate Repair in Everett page.
Gate Installation in Everett
A new gate in Everett usually means matching a fence style that is already there, or starting clean on a new build. Grade and post depth matter here, especially on hillside lots where runoff moves soil. We measure, order, pour, hang, and wire the operator, all under a written quote. The process and pricing for new gates and full gate-and-operator packages are on the Gate Installation in Everett page.
Gate Motor Repair in Everett
When the motor fails but the gate itself is straight, the problem is usually the operator, its board, or its wiring. Everett’s damp air shortens the life of exposed components on Viking, DoorKing, and Linear systems especially. We troubleshoot the motor with the gate disconnected, replace only what is actually failed, and price the work in writing before any parts come out. Specifics are on the Gate Motor Repair in Everett page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Everett
We work on Linear, Viking, DoorKing, and Ghost Controls systems, along with five other brands. Most motors we see in Everett are 10 to 25 years old, and we keep common boards, limit switches, and remotes from these brands on our Seattle-stocked trucks dispatched to Everett, which shortens most repairs to a single visit. See our brands for the full list of what we work on.
Pricing for Gate Company in Everett, WA
| Service | Typical range in Everett |
|---|---|
| Service call and diagnosis | $60 – $90 (waived with repair) |
| Gate off track or misaligned | $150 – $400 |
| Wood or vinyl gate repair | $180 – $450 |
| Iron or steel gate repair | $200 – $600 |
| Sagging gate with hinge replacement | $220 – $500 |
| Dual swing gate adjustment | $250 – $600 |
| Gate operator replacement | $650 – $1,300 |
| New slide gate motor | $950 – $2,100 |
| New swing gate motor | $800 – $1,800 |
| Controller board or limit switch replacement | $200 – $500 |
| Loop detector replacement | $250 – $550 |
| New remote or keypad | $75 – $250 |
In Everett, prices push toward the higher end when a gate is heavily rusted from marine air, when hinge posts have shifted on sloped lots, or when the operator is old enough that parts are no longer available over the counter. The number we quote before starting is the number you pay; it does not move at the door.
Neighborhoods We Serve in Everett
Our crews cover the full city. Most Everett jobs fall inside a two-hour arrival window, and a same-day visit is typical for a gate that will not open or close. Areas we work regularly include:
- Bayside and Northwest Everett, including waterfront homes near Port Gardner
- Riverside and downtown, where many older bungalows have original driveway gates
- View Ridge and Evergreen, covering mid-century homes and HOA entries near Evergreen Way
- Silver Lake and South Forest Park, including hillside lots with sloped driveways
- Eastmont and Casino Road, where newer subdivisions mix with older stock
Service Area – Cities Near Everett
Beyond the city limits, we run the same crews and same written-price process to Marysville, WA, Lake Stevens, WA, Mukilteo, WA, and Snohomish, WA. If you are just across the line, call and we will tell you straight whether your address falls in our normal route.
Serving Everett, WA – Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Everett
For a gate stuck open or closed, we aim for same-day arrival anywhere in Everett, usually within a two-hour window. Scheduling is coordinated from our Seattle office but crews are dispatched to Everett daily, so there is no extra travel delay. Call (469) 530-2485 and a live person gives you a window.
Most gate repairs need no permit. A replacement gate that matches the existing footprint rarely does either. If you are in an HOA-governed community, the association may require design review before a new gate goes in. We can work from your HOA’s checklist, and any permit work is itemized in the written quote before you sign.
We cover the whole city, from Bayside to Silver Lake and from Riverside to the Mukilteo line. Whether the gate is on a flat lot downtown or a steep drive in Forest Park, the arrival window and the written-price process are the same. Call (469) 530-2485 to confirm your address.
If your gate is misbehaving in Everett, call (469) 530-2485 for a free estimate. A live person answers, we give you a straight arrival window, and the price is in writing before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Everett Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.