Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Allen, TX
Carver Gate Repair handles gate repair, replacement, and motor work across Allen, TX. This is the page that tells you what to expect before you call: how Allen’s soil and weather affect gate hardware, what work typically costs in this market, and which neighborhoods our crews cover. We’re not a general contractor who fits gate work in between remodels. Gates and gate motors are all we do. When an iron gate in Allen won’t close or a swing motor stops mid-travel, call (469) 530-2485 and you’ll get a live person, not a voicemail queue.
Why Allen Homes Are Different
Allen sits on what used to be agricultural land with a heavy clay soil profile, and that clay doesn’t sit still. Through wet springs and dry summers, the ground expands and contracts enough to move gate posts, shift hinges, and pull swing gates out of alignment. We see it most often in established neighborhoods like Twin Creeks, Watters Crossing, and Lost Creek Ranch, where gates have been in the ground long enough to feel a full decade of soil movement. The result isn’t dramatic, but it’s consistent: a gate that dragged on the concrete last August, or a post that leans a half-inch out of square by March.
Housing stock runs the same story as most of Collin County: 1990s and 2000s builds with ornamental steel driveway gates, plus newer sections where wrought-iron and automatic sliding gates are standard on larger lots. HOAs are active here, and many require gates to stay in working order within a set number of days. That keeps our phone busy. It also means we quote written prices and honor them, because Allen homeowners don’t have time for a technician who disappears mid-job.
Our Main Allen Services
Most calls we take in Allen fall into one of three buckets, and each has its own dedicated page with full pricing, sub-jobs, and FAQs. Here’s the short version of what each job involves locally.
Gate Repair in Allen
Repair work in Allen usually means one of a few things: a sagging gate that scrapes the driveway, a hinge or weld failure on an ornamental iron gate, a chain-drive issue, or a post that’s shifted out of square in the clay. We inspect the whole gate, not just the broken part, because on an older Allen gate a symptom like a dragging panel usually has a root cause in the posts or hinges underneath. Written price first, then the work. Full detail is on the Gate Repair in Allen page.
Gate Installation in Allen
New installations in Allen typically involve a steel or aluminum driveway gate, either a swing or slide design depending on your driveway slope and setback. We measure on site, order to the dimension, and set posts deep enough to hold in Allen’s clay without movement. Every installation includes a written quote before any material is ordered, and we walk you through motor pairing, access options, and what the county or HOA might require. The full breakdown is on the Gate Installation in Allen page.
Gate Motor Repair in Allen
Texas heat and Allen’s occasional lightning storms are hard on gate motors and control boards. This service covers limit switch failures, control board faults, loop detector issues, and swap-outs on existing automation. We carry parts for the major motor brands and diagnose in place before recommending a repair or replacement. If you’re hearing a motor hum but the gate won’t move, this is where to start: Gate Motor Repair in Allen.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Allen
Our technicians work on the gate motor brands installed across Allen, including Linear, Viking, DoorKing, and Ghost Controls. We keep common boards, arms, and remotes in local stock, which means most motor repairs we see in Allen don’t wait on a part shipment.
Pricing for Gate Company in Allen, TX
| Service | Typical range in Allen |
|---|---|
| Gate repair service call | $75 – $125 |
| Hinge replacement | $150 – $350 per pair |
| Gate post reset | $300 – $600 |
| Weld repair (on-site) | $150 – $400 |
| Gate wheel replacement | $80 – $200 |
| Motor repair (limit switch, capacitor) | $200 – $450 |
| Control board replacement | $350 – $800 |
| Whole motor replacement | $600 – $1,400 |
| New gate installation (steel, manual) | $2,500 – $6,000 |
| New gate installation (steel, automated) | $4,500 – $9,500 |
Two factors push Allen quotes toward the top of those ranges. The first is clay-driven post movement: if a repair requires digging and resetting a post rather than a simple hinge swap, the job grows. The second is gate age and automation style, since older boards and chain-drive systems wear differently than newer belt-drive motors. Whatever the number, it’s written down and agreed before any part is touched. That’s The Garrison Standard, and it applies to every job we do in Allen.
Neighborhoods We Serve in Allen
Our technicians work wherever Allen gates stand. We dispatch from the Dallas-Fort Worth office, so we don’t route through a call center or a different company’s calendar. The list below covers the neighborhoods we see most weeks.
- Twin Creeks
- Watters Crossing
- Lost Creek Ranch
- Star Creek
- Fountain Park
For most Allen-area calls, we can have a technician out within the same day when the job is a true emergency: a gate stuck open or a motor holding a driveway hostage. Non-emergency work schedules on the next available slot.
Service Area – Cities Near Allen
While this page is built for Allen, our crews run the same routes into the cities around it. If you’re just over the line, we serve Plano, TX, McKinney, TX, Wylie, TX, and Sachse, TX with the same written-price, same-guarantee standard.
Serving Allen, TX – Our Local Coverage Area
We’re based in the Allen area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Allen
Most Allen emergency calls are handled same day when we can move a technician over from the metro schedule. A gate stuck open or a motor that won’t respond takes priority over scheduled work. Call (469) 530-2485 and a live person will tell you the current window before you hang up.
It depends on your neighborhood’s covenants. Some Allen HOAs require architectural review for a new gate or a motor change; others only care that the gate stays functional and matches existing streetscape. We can’t file your HOA paperwork, but we can supply the spec sheet and install details your board will ask for. Quote comes first, written, before any of that matters.
Yes. Every job gets a written price before work starts, and that number doesn’t move unless you change the scope. No discovery fee, no surprise line items at the door. If the repair fails inside a year, the second visit is free under our written guarantee. Call (469) 530-2485 for a free estimate on Allen gate work.
Need a gate fixed, installed, or automated in Allen? Call Carver Gate Repair at (469) 530-2485 for a free, written estimate. A live person answers, seven days a week.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Allen Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.