Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Maywood
Gate installation in Maywood is a different job than it is in most cities. The lots here run small, the drives run tight, and most homes were built before 1940, which means the concrete, property lines, and alley access all shape what gets installed and how. If you’re looking for a gate that holds square, cycles every time, and doesn’t turn into a callback, you need a crew that already knows 90270. Call us at (469) 530-2485 and we’ll walk the site, take measurements, and hand you a written price before anyone digs.
We’re the Gate Installation team at Carver Gate Repair. Lonnie Burke runs our crew to The Garrison Standard: written prices, background-checked technicians in uniform, and a 365-day guarantee on every repair we do. No estimate that drifts once the concrete is open. No technician you wouldn’t want in your yard.
Why Carver Gate Repair Is Maywood’s Preferred Gate Installation Company
Maywood is a 1.1-square-mile city in the Gateway Cities region of southeast Los Angeles County. Nearly every residential street is lined with pre-war single-family homes on compact lots, many with rear-alley access and side drives that barely clear a vehicle. That changes how gates get built here. A layout that works on a wide suburban lot in Orange County fails on a Maywood side drive where the hinge post has to sit within inches of the neighbor’s fence line. We know the difference because we work these lots regularly.
Homeowners in Maywood tend to be done with generalists. They’ve had a handyman hang a gate that sagged in six months, or a contractor quote one number and hand them another after the footing was poured. Our process removes that. Every job starts with a site walk, a written price, and a plan review when the city requires it. Our technicians are background-checked and uniformed. The phone is answered by a live person around the clock, including weekends and holidays, so if your gate fails at 7 p.m. on a Sunday, you get a person, not a voicemail.
Gate Fabrication in Maywood
Gate Fabrication for Maywood homes typically means building a panel to fit an existing opening rather than adapting a stock gate to a space that was never standard to begin with. We work with welded steel and aluminum, sized to the exact width, height, and swing or slide configuration of your drive. On Maywood’s older lots, the opening often isn’t level, the columns aren’t plumb, and the side clearance is tight. Fabrication gives you a gate that fits the real site instead of forcing a catalog gate into a space it won’t hold.
A fabricated steel driveway gate for a single-car opening in Maywood generally runs $2,800 – $5,500, depending on panel height, infill style, and whether you’re adding a pedestrian gate. Double gates and ornamental designs push toward the upper end. Aluminum runs slightly lower, $2,200 – $4,000. All prices are written and agreed before any work starts.
Material Selection
Steel is the default for Maywood because it stands up to the damp marine layer that rolls in off the LA Basin and holds its shape on long spans. Aluminum saves weight on a sliding gate but dents more easily and costs more per foot when properly reinforced. We don’t push either one; we show you the numbers for both on your specific opening.
Custom Sizing
If you’re replacing a gate on a pre-1940 lot, the opening was probably never square. We measure both sides, the top reveal, and the fall of the drive before cutting anything. The fabricated panel gets built to the actual dimensions, not the nominal ones.
Automatic Gate Installation in Maywood
Automatic Gate Installation for a Maywood driveway means more than bolting an operator to a post. The operator needs a properly sized concrete pad. The power run needs conduit. The safety system, on any automatic gate, must reverse the gate when it contacts an object or the photo-eye beam is broken. The City of Maywood requires plan review for automatic driveway gates, so we handle the permit paperwork and coordinate the inspection with your schedule.
For a single swing or slide gate with automatic operation, Maywood homeowners typically pay $4,200 – $7,500 all-in, including the operator, wiring, safety edges or photo-eyes, and the pad. Double gates run closer to $6,000 – $9,500. The price gets quoted in writing before we open the concrete.
Operator Pad and Power Run
On a narrow side drive, the pad and conduit are usually where short-cut installers fail. We excavate below grade, set a pad sized to the operator’s torque requirements, and run conduit so no wiring is surface-mounted or exposed to traffic. The loop detector, if you want vehicle-sensing, goes in the same trench before the concrete closes.
UL 325 Safety Compliance
Any automatic gate installed in Maywood needs entrapment protection that meets UL 325: photo-eyes, edge sensors, or both. The gate should reverse when it meets resistance. We wire and test every safety device before the final walk-through, and we document the reversal test.
Trusted Brands We Service in Maywood
We install and service operators from Linear, Viking, and DoorKing for Maywood driveways, along with LiftMaster, FAAC, BFT, Ghost Controls, Elite, and Mighty Mule across the rest of our work. The reason that matters: not every operator suits a tight side-drive slide gate or a long swing arm. We stock parts locally for the brands we see most on Maywood drives, so when a control board or limit switch fails, we’re not waiting on a shipped part before we can get your gate cycling again. The right operator for your layout depends on gate weight, panel length, and duty cycle; we match the motor to the gate, not the other way around.
Common Gate Installation Problems We See in Maywood Homes
Maywood’s housing stock creates predictable failure patterns. These are the ones we fix most often:
- Hinge posts set in undersized footings. On pre-1940 lots, many original gate posts were set shallow in a light concrete collar. A new gate panel hung on that old post will sag within a season. We cut out the old footing, set a new post at proper depth, and let the concrete cure before hanging weight on it.
- Operators mounted with no pad or undersized conduit. Tight side drives make some installers surface-run the wiring and shim the operator on thin concrete. Vibration kills those boards. We set a proper pad below grade and run conduit so the wiring survives decades, not months.
- Missing or defeated entrapment protection. Older automatic gates in Maywood sometimes run with no photo-eyes or edge sensors. That gate can close on a car, a child, or you. UL 325 isn’t optional; we wire and test the safety system on every install, every time.
- Swing gates hung on drives that never had room to swing. A swing gate on a short side drive near the neighbor’s line will bind or strike the wall. Maywood’s tight setbacks often make a slide gate the only workable option, which is why we measure swing arc before quoting a single panel.
Pricing for Gate Installation in Maywood, CA
Gate installation in Maywood lands in predictable ranges once the site is measured. A welded steel single driveway gate, manual or automated, runs $2,800 – $7,500 depending on operation and panel width. A custom fabricated steel gate with a slide operator and full safety system typically sits between $4,200 – $7,500 for a single panel; double swing or double slide configurations run $6,000 – $9,500. Pedestrian gates with matching infill add $800 – $1,800. What moves the number is not mystery, it’s specifics: panel weight, operator brand, footings, permit fees, and demolition of the old gate. Every quote is written and fixed before we start. Call (469) 530-2485 and we’ll give you a real number for your opening.
We Also Serve Cities Near Maywood
Our crews run from Bell through Huntington Park, Bell Gardens, and South Gate, so if you’re a few blocks outside the 90270 line, we’re still your local option for reliable Gate Installation in Maywood and the surrounding Gateway Cities. Dispatch routes through Los Angeles, so a live person always answers and schedules the arrival window.
Serving Maywood, CA – Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Maywood
Sometimes, but not often. On Maywood’s pre-war lots, the side clearance is frequently under 18 inches, and a swing gate needs its full arc clear of the wall and the neighbor’s line. We measure the setback and the swing radius before quoting. If it won’t clear, we recommend a slide gate with a rack and pinion drive, which tracks parallel to the fence and uses almost no side room. Call (469) 530-2485 and we’ll tell you which one your drive can actually take.
A proper automatic gate installation includes a concrete operator pad poured below grade, conduit for all power and low-voltage wiring, a UL 325-compliant entrapment protection system with at least one safety edge or photo-eye pair, and a full reversal test documented at the final walk-through. It also includes the permit package when the city requires plan review, which Maywood does for automatic driveway gates. Anything less than all of that is a partial job.
Yes. The City of Maywood requires plan review for automatic driveway gates, and we handle the permit package as part of the installation. That includes the site plan, operator cut sheet, and safety compliance documentation. We coordinate the inspection and stay available until the city signs off. If a contractor tells you a permit isn’t needed, check with the building department before you hand over a deposit.
From first call to working gate usually takes one to two weeks in Maywood. That includes the site walk, written quote, permit submittal and plan review if required, fabrication time, concrete cure, and final wiring and testing. We don’t promise same-day installation because a proper footing has to cure before weight goes on it. We do promise a written schedule and a written price before any work begins. Call (469) 530-2485 and we’ll give you a realistic timeline for your opening.
We install operators from Linear, Viking, and DoorKing most often in Maywood, along with LiftMaster, FAAC, and BFT where the gate weight or duty cycle calls for them. The brand matters less than whether the operator’s torque and cycle rating match the panel. We’ll show you the measured panel weight and the recommended operator for it, on paper, before you choose.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Maywood with written prices and guaranteed gate work.